KALERUM Handle Assembly Instructions
Design and Quality IKEA of Sweden
Tools Required
- Screwdriver ?
- Drill ⚙️
- Pencil ✏️
- Clamp ?️
Note: Ensure you have the necessary tools before starting assembly. Some steps may require drilling.
Step 1: Mark Drilling Points
Measure and mark the desired positions for the handle on the furniture surface. Use a pencil for marking.
Available measurements:
- 128 mm (5 1/16")
- 256 mm (10 1/16")
- 384 mm (15 1/8")
Diagram shows a ruler and pencil marking points on a surface.
Step 2: Drill Holes
Using a drill with a 5 mm (3/16") drill bit, create holes at the marked points. A clamp can be used to secure the piece while drilling.
Diagram shows a drill creating a hole at a marked point, with a clamp holding the material.
Step 3: Attach the Handle
Insert the screws (part number 106603) through the back of the furniture surface and into the handle. Tighten the screws securely.
Diagram shows screws being inserted into the handle from the back of a surface.
Date of production: 2023-10-26
© Inter IKEA Systems B.V. 2023
Article Number: AA-2407662-3
