Freshwater Installation
Basic Freshwater Network Setup
Installation of one bow-mounted Humminbird unit and one console-mounted unit, networked together, with a heading sensor GPS puck and a high-speed transducer with a y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 2) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 4 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720103-1 |
| 5 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 |
Diagram Description:
The diagram shows a boat's electronics setup. A 'BOW UNIT' and a 'CONSOLE UNIT' are depicted. Connections are made using:
- Ethernet cables (represented by yellow lines) for networking between units.
- A Transducer Cable (orange line) connecting the transducer to the units.
- 12V DC Power (red line) supplying power to the system.
- Bluetooth® Signal (blue line) for wireless communication.
Key components include the Trolling Motor Batteries and Cranking Battery. A Heading Sensor is also integrated into the network.
Freshwater Installation with Minn Kota Trolling Motor & MEGA Imaging
Installation of a Minn Kota trolling motor with i-Pilot Link and built-in MEGA Imaging, along with one bow-mounted Humminbird unit and one console-mounted Humminbird unit, a heading sensor GPS puck, and a high-speed transducer with a y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 2) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable (Need 2) | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 4 | Minn Kota Trolling Motor with i-Pilot Link and built-in MEGA Imaging* | ||
| 5 | 5-Port Ethernet Switch | AS ETH 5PXG | #408450-1 | AS ETH 5PXG | #408450-1 Note: Networks exclusively with APEX units do not require 5-Port Ethernet Switch |
| 6 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720103-1 |
| 7 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 | |
| 8 | Adapter Cable for built-in MEGA Imaging | MKR-MI-1 (HELIX 8-12 G2N and newer) #1852088 MKR-MDI-2 HB HELIX 7 G2N/G3N #1852086 |
N/A |
Diagram Description:
The diagram illustrates the network setup for a boat featuring a Minn Kota trolling motor. It shows a 'BOW UNIT' and a 'CONSOLE UNIT' connected via Ethernet cables (yellow lines). A 'Heading Sensor' is integrated. Power is supplied by 'Trolling Motor Batteries' and a 'Cranking Battery'. The 'Minn Kota Trolling Motor' is a central component. Connections include Transducer Cables (orange), 12V DC Power (red), and Bluetooth® Signal (blue).
Freshwater Installation with Ultrex, MEGA 360, and Talon
Installation of a Minn Kota Ultrex trolling motor with i-Pilot Link and built-in MEGA Imaging, one bow-mounted Humminbird unit, two console-mounted Humminbird units, MEGA 360 Imaging – Ultrex, a Minn Kota Shallow Water Anchor, a heading sensor GPS puck, and a high-speed transducer with a y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 3) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable (Need 3) | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 4 | Minn Kota Ultrex Trolling Motor with i-Pilot Link and built-in MEGA Imaging* | ||
| 5 | 5-Port Ethernet Switch | AS ETH 5PXG | #408450-1 | AS ETH 5PXG | #408450-1 Note: Networks exclusively with APEX units do not require 5-Port Ethernet Switch |
| 6 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720111-1 |
| 7 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 | |
| 8 | Minn Kota Talon/Raptor with Bluetooth | Talon SWA | Talon SWA |
| 9 | MEGA 360 and MDI/2D Y-Cable | 14 M360 2DDIY | #720108-1 | 14 M360 2DDIY | #720108-1 |
| 10 | Adapter Cable for MEGA 360 Y-Cable | AD HELIX M360 (included with MEGA 360) | N/A |
| 11 | MEGA 360 Imaging | MEGA 360 Imaging - Ultrex | #411250-1 | MEGA 360 Imaging - Ultrex | #411250-1 |
Diagram Description:
This diagram illustrates a complex boat network. It includes a 'BOW UNIT' and two 'CONSOLE UNITS'. A 'MEGA 360 Imaging Ultrex' unit is shown connected to the bow. A 'Minn Kota Trolling Motor' with 'Heading Sensor' is present, powered by 'Trolling Motor Batteries' and a 'Cranking Battery'. Connections are made via Ethernet (yellow), Transducer Cable (orange), 12V DC Power (red), and Bluetooth® Signal (blue). Additional components like the Minn Kota Talon/Raptor are also indicated.
Freshwater Installation - Adding MEGA 360 Imaging
Adding a MEGA 360 Imaging – Ultrex model to a boat with one or two bow-mounted Humminbird units and a Minn Kota motor with built-in MEGA Imaging.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 2 | Minn Kota Trolling Motor with i-Pilot Link and built-in MEGA Imaging* | ||
| 3 | MEGA 360 and MDI/2D Y-Cable | 14 M360 2DDIY | #720108-1 | 14 M360 2DDIY | #720108-1 |
| 4 | MEGA 360 Adapter Cable | AD HELIX M360 (included with MEGA 360) | N/A |
| 5 | MEGA 360 Imaging | MEGA 360 Imaging - Ultrex | #411250-1 | MEGA 360 Imaging - Ultrex | #411250-1 |
Diagram Description:
The diagram shows a 'BOW UNIT' connected to a 'Minn Kota Trolling Motor' with a 'Heading Sensor'. Power is supplied by 'Trolling Motor Batteries' and a 'Cranking Battery'. The MEGA 360 Imaging unit is integrated into the network via specific cables and adapters, indicated by numbered connections and colored lines representing Ethernet, Transducer Cable, 12V DC Power, and Bluetooth® Signal.
Freshwater Installation - Adding MEGA Live Imaging
Adding a MEGA Live Imaging transducer to a boat with one or two bow-mounted Humminbird units and a Minn Kota motor with built-in MEGA Imaging.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 2) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable (Need 2) | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | Minn Kota Trolling Motor with i-Pilot Link and built-in MEGA Imaging* | ||
| 4 | Adapter Cable for built-in MEGA Imaging | MKR-MI-1 (HELIX 8-12 G2N and newer) #1852088 MKR-MDI-2 (HELIX 7 G3/G3N and newer) #1852086 |
N/A |
| 5 | 5-Port Ethernet Switch | AS ETH 5PXG | #408450-1 | AS ETH 5PXG | #408450-1 Note: Networks exclusively with APEX units do not require 5-Port Ethernet Switch |
| 6 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 7 | MEGA Live Imaging | MEGA Live Imaging Transducer | #710304-1 | MEGA Live Imaging Transducer | #710304-1 |
Diagram Description:
The diagram shows a 'BOW UNIT' connected to a 'Minn Kota Trolling Motor' with a 'Heading Sensor'. Power is supplied by 'Trolling Motor Batteries' and a 'Cranking Battery'. The MEGA Live Imaging transducer is integrated into the network via Ethernet cables (yellow), Transducer Cables (orange), 12V DC Power (red), and Bluetooth® Signal (blue) connections.
Freshwater Installation - Console Only
(1) Console-mounted Humminbird unit with high-speed transducer and y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720103-1 |
| 2 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 |
Diagram Description:
This diagram shows a 'CONSOLE UNIT' connected to a transducer via a 'Transducer Splitter Cable'. Power is supplied by a 'Cranking Battery'. The transducer is described as being supplied with a MEGA Side Imaging unit at the console.
Saltwater Installation
Basic Saltwater Network Setup
Installation of a Minn Kota Riptide trolling motor with i-Pilot Link and one console-mounted Humminbird unit, with a heading sensor GPS puck and a high-speed transducer with a y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable | AS EC QDE #720074-1 | N/A |
| 2 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 3 | Minn Kota Trolling Motor with i-Pilot Link* | ||
| 4 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720111-1 |
| 5 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 | |
| 6 | Optional Transducer (thru-hull) | SSTH 14 HW MSI+T | #710302-1 MKR-MI-1 HB | #1852088 |
SSTH 14 HW MSI+ T | #710302-1 |
Diagram Description:
The diagram shows a 'CONSOLE UNIT' connected to a 'Minn Kota Trolling Motor' and 'Heading Sensor'. Power is supplied by 'Trolling Motor Batteries' and a 'Cranking Battery'. Connections include Ethernet (yellow), Transducer Cable (orange), 12V DC Power (red), and Bluetooth® Signal (blue).
Saltwater Installation with Riptide, Radar, Downriggers, and Talon
Installation of a Minn Kota Riptide trolling motor with i-Pilot Link, two console-mounted Humminbird units, Humminbird CHIRP radar, Cannon Optimum Downriggers, a heading sensor GPS puck, and a high-speed transducer with a y-cable.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 2) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable (Need 2) | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 4 | Minn Kota Trolling Motor with i-Pilot Link* | ||
| 5 | 5-Port Ethernet Switch | AS ETH 5PXG | #408450-1 | AS ETH 5PXG | #408450-1 Note: Networks exclusively with APEX units do not require 5-Port Ethernet Switch |
| 6 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720111-1 |
| 6 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 | |
| 8 | Radar | HB 2124 CHIRP Radar | #750013-1 | HB 2124 CHIRP Radar | #750013-1 |
| 9 | Optimum TS Downriggers (Need 2) | Optimum TS | #1902340 | Optimum TS | #1902340 |
| 10 | Optional Transducer (thru-hull) | SSTH 14 HW MSI+T | #710302-1 MKR-MI-1 HB | #1852088 |
SSTH 14 HW MSI+ T | #710302-1 |
Diagram Description:
This diagram depicts a complex saltwater marine electronics setup. It includes a 'Minn Kota Trolling Motor' with a 'Heading Sensor', powered by 'Trolling Motor Batteries' and a 'Cranking Battery'. Two 'CONSOLE UNITS' and a 'Radar' unit are shown. Connections are made via Ethernet (yellow), Transducer Cable (orange), 12V DC Power (red), and Bluetooth® Signal (blue). 'Cannon Optimum Downriggers' are also integrated into the system.
Saltwater Installation - With Riptide, Radar, Talon, and Second Station
Installation of a Minn Kota Riptide trolling motor with i-Pilot Link, two console-mounted Humminbird units, one Humminbird unit at a second station, Humminbird CHIRP radar, and Talon Shallow Water Anchors.
Components Required:
| Item | Description | Part Numbers (HELIX SERIES) | Part Numbers (APEX/SOLIX SERIES) |
|---|---|---|---|
| 1 | Ethernet Adapter Cable (Need 3) | AS EC QDE #720074-1 | N/A |
| 2 | Ethernet Cable (Need 3) | AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
AS EC 5E (5') | #720073-6 AS EC 10E (10') | #720073-2 AS EC 15E (15') | #720073-5 AS EC 20E (20') | #720073-3 AS EC 30E (30') | #720073-4 |
| 3 | GPS + Heading Sensor | AS GPS HS | #408400-1 | APEX: AS GPS HS | #408400-1 AS GPS | #720113-1 SOLIX: AS GPS HS | #408400-1 AS GPS NMEA | #720080-1 |
| 4 | Minn Kota Trolling Motor with i-Pilot Link* | ||
| 5 | 5-Port Ethernet Switch | AS ETH 5PXG | #408450-1 | AS ETH 5PXG | #408450-1 Note: Networks exclusively with APEX units do not require 5-Port Ethernet Switch |
| 6 | Transducer Splitter Cable | 9 M SIDBY | #720101-1 | 14 M SIDBY | #720111-1 |
| 6 | High Speed Transducer (fiberglass hull) | XP 9 HWT | #710276-1 | XP 14 HWT | #710287-1 |
| High Speed Transducer (aluminum hull) | XNT 9 HWT | #710274-1 | XNT 14 HWT | #710285-1 | |
| 8 | Radar | HB 2124 CHIRP Radar | #750013-1 | HB 2124 CHIRP Radar | #750013-1 |
| 9 | Minn Kota Talon/Raptor with Bluetooth | Talon SWA | Talon SWA |
| 10 | Optional Transducer (thru-hull) | SSTH 14 HW MSI+T | #710302-1 MKR-MI-1 HB | #1852088 |
SSTH 14 HW MSI+ T | #710302-1 |
Diagram Description:
This diagram illustrates a comprehensive saltwater marine electronics network. It includes a 'Minn Kota Trolling Motor' with a 'Heading Sensor', powered by 'Trolling Motor Batteries' and a 'Cranking Battery'. The setup features two 'CONSOLE UNITS', a 'Radar' unit, and a 'Second Station' Humminbird unit. Connections are made via Ethernet (yellow), Transducer Cable (orange), 12V DC Power (red), and Bluetooth® Signal (blue). 'Minn Kota Talon Shallow Water Anchors' are also integrated.
File Info : application/pdf, 14 Pages, 362.57KB
DocumentDocumentReferences
GPL Ghostscript 9.23 Adobe InDesign 16.4 (Macintosh)
HUMMINBIRD.COMRelated Documents
 |
Humminbird and Minn Kota Freshwater Installation Guide Comprehensive guide for installing Humminbird fish finders and Minn Kota trolling motors with i-Pilot Link and MEGA Imaging, detailing component connections and part numbers for optimal boat integration. |
 |
Humminbird SOLIX Operations Manual A comprehensive operations manual for the Humminbird SOLIX series of marine electronics, covering navigation, sonar, radar, and system features for optimal use on the water. |
 |
Humminbird MEGA 360 Imaging Freshwater Installation Guide Guide for installing the Humminbird MEGA 360 Imaging system with Minn Kota Ultrex trolling motors in freshwater environments, detailing component compatibility for HELIX and APEX/SOLIX series. |
 |
Humminbird HELIX, SOLIX, and PiranhaMAX Series: Marine Electronics Catalog Explore Humminbird's advanced marine electronics, featuring the HELIX, SOLIX, and PiranhaMAX series. This catalog showcases cutting-edge fish finders, GPS systems, and sonar technologies like MEGA Imaging and CHIRP, designed for anglers seeking superior performance and intuitive operation on the water. |
 |
Humminbird MEGA Live 2 Installation Guide This installation guide provides detailed instructions for installing the Humminbird MEGA Live 2 transducer on Minn Kota trolling motors. It covers compatibility, software updates, mounting procedures, cable routing, and setup. |
 |
MEGA Live Imaging Guide d'utilisation - Humminbird This user guide provides instructions for setting up, operating, and troubleshooting the Humminbird MEGA Live Imaging sonar system. Learn about its features, compatibility, and how to connect it to your Humminbird fishfinder. |
 |
Humminbird Transducer Compatibility Guide A comprehensive guide to Humminbird transducer compatibility with various Fish Finder models, including HELIX and SOLIX series. This document details part numbers and transducer capabilities. |
 |
Humminbird Transom Transducer Installation Guide: Step-by-Step Instructions A comprehensive guide for installing your Humminbird transom transducer, covering preparation, mounting, angle adjustment, cable routing, testing, and maintenance for optimal performance. |