FRESHWATER INSTALLATION
▶️ Adding a MEGA 360 Imaging – Ultrex model to a boat with (1) bow-mounted Humminbird unit and Minn Kota motor with built-in MEGA Imaging.
| HELIX SERIES | APEX/SOLIX SERIES |
|---|---|
| 1 GPS + Heading Sensor AS GPS HS #408400-1 | GPS + Heading Sensor APEX: AS GPS HS #408400-1 AS GPS #720113-1 SOLIX: AS GPS HS #408400-1 AS GPS NMEA #720080-1 |
| 2 Minn Kota Trolling Motor with i-Pilot Link and built-in MEGA Imaging* | Minn Kota Trolling Motor with i-Pilot Link and built-in MEGA Imaging* |
| 3 MEGA 360 and MDI/2D Y-Cable 14 M360 2DDI Y #720108-1 | MEGA 360 and MDI/2D Y-Cable 14 M360 2DDI Y #720108-1 |
| 4 MEGA 360 Adapter Cable AD HELIX M360 (included with MEGA 360) | MEGA 360 Adapter Cable N/A |
| 5 MEGA 360 Imaging MEGA 360 Imaging - Ultrex #411250-1 | MEGA 360 Imaging MEGA 360 Imaging - Ultrex #411250-1 |
*One (1) AS ECX 30E ethernet extension cable included with i-Pilot Link trolling motor. The accessories and part numbers listed above are valid as of November 2021. Installations shown are for HELIX G3N/G4N and APEX/SOLIX G2/G3 networking models and Minn Kota trolling motors with i-Pilot Link.
System Diagram: BOW UNIT
The diagram illustrates the setup for a bow unit, showing the interconnection of various components:
- Networking Graph: A central hub or connection point for the system.
- Component 1: Likely the primary Humminbird display unit.
- Component 2: The Minn Kota Trolling Motor.
- Component 3: The MEGA 360 and MDI/2D Y-Cable, used for connecting the MEGA 360.
- Component 4: The MK Heading Sensor, providing heading data.
- Component 5: The MEGA 360 Imaging unit itself.
Power is supplied by a Cranking Battery and Trolling Motor Batteries, connected to the trolling motor and potentially other components.
[NMEA 0183] [Ethernet] [12V DC Power] [Transducer Cable] [Bluetooth® Signal]
HUMMINBIRD.COM
