Introduction
Welcome to the world of Humminbird MEGA Live Imaging. This guide is designed to help you understand and utilize the full capabilities of your new sonar system. Humminbird is a leader in marine electronics, known for high-quality and reliable products. This manual will assist you in setting up and operating your MEGA Live Imaging system for optimal performance on the water.
For support, visit humminbird.com or call 1-800-633-1468.
Important Information
Before using your MEGA Live Imaging transducer, please note the following:
- The transducer is designed for trolling speeds. Avoid high-speed operation with the transducer submerged.
- Be aware of underwater obstructions that could damage the transducer.
- Ensure the system is powered off when the boat is docked or stored to prevent unnecessary wear.
- Proper configuration of your Humminbird head unit is essential for accessing MEGA Live Imaging features. Refer to the manual for your specific head unit for detailed setup instructions.
Compatibility
MEGA Live Imaging is compatible with APEX models, SOLIX models, HELIX G3N and G4N models with MEGA Imaging+, and HELIX 7 G4N models with MEGA Down Imaging or MEGA Side Imaging.
Getting Started
This guide covers the initial setup and connection confirmation for your MEGA Live Imaging system. It includes steps for powering on your head unit and transducer, and verifying the connection of the MEGA Live Imaging and optional GPS/compass receiver.
Note: All connections should be made before powering on the head unit.
GPS Reception
Accurate GPS and compass data are necessary for the boat icon to appear on your head unit. This section details how to confirm GPS reception and satellite signal strength, ensuring your system is ready for navigation.
