MAP METER/MILE MARKER FUNCTION AND ROTATING COMPASS BEZEL

Introduction

You are now the proud owner of a SEIKO Watch with the "Map meter/Mile Marker Function and Rotating Compass Bezel". For best results, please read the instructions in this booklet carefully before using your SEIKO Watch. Please keep this manual handy for ready reference.

This booklet also contains instructions in other languages:

• German: BEDIENUNGSANLEITUNG (Page 13)
• French: INSTRUCTIONS (Page 21)
• Italian: ISTRUZIONI (Page 30)
• Spanish: INSTRUCCIONES (Page 39)
• Portuguese: INSTRUÇÕES (Page 48)
• Chinese: 用法説明 (Page 57)

Contents

• MAP METER/MILE MARKER FUNCTION - Page 4
• PRECAUTIONS ON USING THE WATCH WITH THE MAP METER/MILE MARKER FUNCTION - Page 8
• ROTATING COMPASS BEZEL - Page 9
• PRECAUTIONS ON USING THE COMPASS BEZEL - Page 11

MAP METER/MILE MARKER FUNCTION

The map meter/mile marker function measures the real distance of a route on a map by tracing the route with the wheel that drives the dial ring.

• Models with the map meter function have a dial ring with a 1:50000-map meter scale with kilometer readout.
• Models with the mile marker function have a dial ring with a 1:62500-mile marker scale with mile readout.

How to use the map meter/mile marker function

1. Unlock the driving wheel by turning the guard clockwise until it stops.
2. Turn the driving wheel gently so that "0 mile" on the dial ring aligns with the [scale indicator] at the 9 o'clock position on the dial.
3. Place the map on a flat surface. Position the driving wheel aslant on your starting point. With the dial of the watch facing up and the driving wheel at the 9 o'clock position, trace the route slowly with the driving wheel so that it rotates counter-clockwise.
4. Read the scale on the dial ring indicated by the [scale indicator] on the dial. (Refer to "How to read the map meter/mile marker scale.")
5. After all measurements are completed, lock the driving wheel by turning the guard counter-clockwise until it stops.

How to read the map meter scale (For a model with the map meter function)

• When using a map on a scale of 1:50,000: The figure indicated by the [scale indicator] on the dial corresponds to the real distance of the route traced by the driving wheel. For example, if the [scale indicator] points to "2" on the map meter scale, the real distance is "2 km."
• When using a map on a scale other than 1:50,000: Divide the scale of the map by the scale of the watch (50,000). Multiply this result by the distance indicated by the [scale indicator] on the map meter scale.
  • Example 1: If the map scale is 1:20,000 and the [scale indicator] indicates "2" on the map marker scale, the real distance is (20,000 / 50,000) x 2 = 0.8 km.
  • Example 2: If the map scale is 1:150,000 and the [scale indicator] indicates "6" on the map marker scale, the real distance is (150,000 / 50,000) x 6 = 18 km.

How to read the mile marker scale (For a model with the mile marker function)

• When using a map on a scale of 1:62,500: The figure indicated by the [scale indicator] on the dial corresponds to the real distance of the route traced by the driving wheel. For example, if the [scale indicator] points to "2" on the mile marker scale, the real distance is "2 miles."
• When using a map on a scale other than 1:62,500: Divide the scale of the map by the scale of the watch (62,500). Multiply this result by the distance indicated by the [scale indicator] on the mile marker scale.
  • Example 1: If the map scale is 1:24,000 and the [scale indicator] indicates "2" on the mile marker scale, the real distance is (24,000 / 62,500) x 2 = 0.77 miles.
  • Example 2: If the map scale is 1:150,000 and the [scale indicator] indicates "6" on the mile marker scale, the real distance is (150,000 / 62,500) x 6 = 14.4 miles.

PRECAUTIONS ON USING THE WATCH WITH THE MAP METER/MILE MARKER FUNCTION

• When measuring distance, trace the route on the map slowly and securely with the driving wheel, taking care not to apply undue force. If the driving wheel is pressed too lightly, it may slip off the route.
• Do not use the map meter/mile marker function in sandy or dusty places.
• Your watch is designed to withstand up to 20 bar, but do not use the map meter/mile marker function in water, as this may damage the driving wheel. When wearing the watch in water, ensure the driving wheel is securely locked.
• To prevent undue strain on the stem, keep the driving wheel locked during normal use.
• The accuracy of distance indication may be affected by measurement conditions; use the indication as an approximate guide only.
• When handling the watch, exercise caution with the serrated edge of the driving wheel, which is sharp and could cause injury. Keep the driving wheel locked during normal use to prevent potential injury.

ROTATING COMPASS BEZEL

(using the 24-hour hand to indicate directions)

How to use the compass bezel

In the Northern Hemisphere:

1. Set "N" on the rotating compass bezel to the 12 o'clock position. The direction marks on the bezel are set as follows:
   • 3 o'clock position: E (East)
   • 6 o'clock position: S (South)
   • 9 o'clock position: W (West)
2. While keeping the dial level, point the 24-hour hand in the direction of the sun ☀️. The direction marks on the bezel indicate the corresponding directions.

In the Southern Hemisphere:

1. Set "S" on the rotating compass bezel to the 24-hour hand.
2. While keeping the dial level, point the 12 o'clock position in the direction of the sun ☀️. The direction marks on the bezel indicate the corresponding directions.

PRECAUTIONS ON USING THE COMPASS BEZEL

• Please use the compass in places where the sun ☀️ is visible or its location is known.
• Before using the compass, it is necessary to set the 24-hour hand to the current time of your area.
• The compass is designed to provide only a rough indication of directions and should not be used where accuracy is critical.
• If daylight saving time (summer time) is in effect in your area, set your watch one hour behind the current time before using the rotating compass bezel.