Dining Chair Assembly Instructions 16098BK
Attention
1. Prior to assembly, please lay out and identify all the parts as listed below to ensure they are received.
2. Tighten all nuts and bolts securely. All bolts should be hand tightened before use.
3. Should you experience any difficulty during assembly or if any parts are missing or damaged, please feel free to contact AECOJOY.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Chair Back | 2PCS |
| B | Right Leg | 2PCS |
| C | Left Leg | 2PCS |
| D | Chair Seat | 2PCS |
| E | M6*15 Bolt | 20PCS |
| F | M6*30 Bolt | 4PCS |
| G | Washer | 24PCS |
| H | Hex Key | 1PC |
Assembly Guide
Note: Please do not fix screws tightly before all the screws are aligned. Tighten all screws at last.
STEP 1
Attach the Right Leg (B) to the Chair Back (A).
Visual: A diagram shows a Right Leg (B) being connected to the side of the Chair Back (A). A M6*30 Bolt (F) and a Washer (G) are inserted through the leg into the chair back. The process is repeated for the other side.
STEP 2
Attach the Left Leg (C) to the Chair Back (A).
Visual: A diagram shows a Left Leg (C) being connected to the side of the Chair Back (A). A M6*30 Bolt (F) and a Washer (G) are inserted through the leg into the chair back. The process is repeated for the other side.
STEP 3
Attach the Chair Seat (D) to the assembled frame.
Visual: A diagram shows the Chair Seat (D) being positioned onto the frame created by the chair back and legs. Ten M6*15 Bolts (E) and ten Washers (G) are used to secure the seat to the chair back and legs. A final image displays the fully assembled dining chair.
