Avanti FFFDS175L3S Refrigerator/Freezer

Appliance Safety

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

⚠️ This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others.

All safety messages will follow the Safety Alert Symbol and either the words "DANGER", "WARNING" or "CAUTION".

All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

Important Safeguards

Before the beverage cooler is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the beverage cooler, follow basic precautions, including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
• Replace all panels before operating.
• It is recommended that a separate circuit, serving only your beverage cooler, be provided. Use receptacles that cannot be turned off by a switch or pull chain.
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.

• Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.
• To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 55°F (13°C) and below 90°F (32 °C). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or sunlight.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
• Do not use this apparatus for other than its intended purpose.

Help Us Help You

Read this guide carefully. It is intended to help you operate and maintain your new appliance properly. Keep it handy to answer your questions. If you don't understand something or you need more help, please call:

Avanti Customer Service
800-220-5570

Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.

Write down the model and serial numbers. You'll find them on a plate located on the rear outside wall of the appliance.

Please write these numbers here:

Date of Purchase: ___________________________________

Model Number: ___________________________________

Serial Number: ___________________________________

Use these numbers in any correspondence or service calls concerning your appliance.

If you received a damaged appliance, immediately contact the dealer (or builder) that sold you the appliance.

Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

If You Need Service

We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance.

FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:

Customer Service
Avanti Products LLC
3265 Meridian Pkwy #114
Weston, FL 33331
www.avantiproducts.com

Parts and Features

Note: The section separator area contains an Anti-Condensation heater and will be warm to the touch during the Anti-Condensation cycle to prevent condensation forming between the two sections.

Installation Instructions

Before Using Your Appliance

• Remove the exterior and interior packing.
• Check to be sure you have all the following parts:
  • 2 Refrigerator Shelves
  • 2 Vegetable Crispers
  • 1 Glass Crisper Cover
  • 6 Door Bins (3 Each Door)
  • 1 Instruction Manual

Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Installation of Your Appliance

Place your refrigerator-freezer on a floor that is strong enough to support the refrigerator- freezer when it is fully loaded. To level your refrigerator-freezer, adjust the leveling legs at the bottom of unit.

ALLOW 3-5 INCHES OF SPACE BETWEEN THE BACK AND THE WALL AS WELL AS A MINIMUM OF 1/2" (HALF INCH) AT EACH SIDE OF THE UNIT AND ONE (1) INCH AT THE TOP, WHICH ALLOWS THE PROPER AIR CIRCULATION TO COOL THE COMPRESSOR AND CONDENSER.

Minimum Space Allowances

• Top: One (1.0) Inch
• Sides: Half Inch (1/2) Inch each side
• Back: Three to Five (3 – 5) Inches at the back

Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the refrigerator- freezer not to perform properly.

Avoid locating the unit in moist areas.

Plug the unit into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

Electrical Connection

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

This appliance requires a standard 115Volts~/60Hz electrical outlet with three-prong ground.

The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.

Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this unit. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

SURGE PROTECTOR

Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

Operating Your Appliance

Refrigerator Temperature Control

• CONTROL PANEL – CHILD LOCK
  The CONTROL PANEL LOCK is designed to prevent any changes to the settings to the refrigerator. To enable the CHILD LOCK, press the LOCK button, the CHILD LOCK icon will turn on. The control panel will be locked until unlocked at the control panel or there is a loss of power. To disable the CHILD LOCK, press and hold the lock button for approximately 3 seconds until the LOCK icon turns off and the control panel is working in normal operation mode.
• CONTROL PANEL – STANDBY
  The CONTROL PANEL will go dark after approximately 5 minutes of no activity. To reactive the display, simply press any of the buttons on the control panel.

Setting the Temperature Control

• Your unit has one control for regulating the temperature. The temperature control is located on the outside of the refrigerator compartment door.
• The first time you turn the unit on, the unit will start at the default temperature set at the factory, 41°F in the refrigerator section and -04°F in the freezer section.
• The first time you turn the unit on, adjust the temperature in the refrigerator compartment to 36°F and run for at least 4 hours before placing foods inside. This will ensure the freezer cabinet is thoroughly chilled and the refrigerator compartment will be stabilized before food is placed. Then adjust the temperature setting to your desired setting that best suits your needs.

To adjust the temperature in each zone, press the appropriate zone button, the selected zone will flash on and off. The temperature will change according to the pre-set temperatures as shown below, you will hear a bell chime with each press of the control panel buttons.

Fridge

Freezer

Preprogrammed Functions:

• FAST FREEZE MODE
  This mode will set the freezer temperature to -18°F for quick temperature drop when storing large amounts of warm or room temperature foods in the freezer. The unit will remain in FAST FREEZE mode for 24 hours or until the temperature reaches --18°F or and will then return to the original setting or until the function is turned off at the control panel. Both FAST COOL and FAST FREEZE can be run together at the same time. To enable the FAST FREEZE mode, press the feature button until the FAST FREEZE icon is illuminated. The icon will remain illuminated when activated. To disable the FAST FREEZE mode, press the function button until the FAST FREEZE icon is turned off.
• FAST COOL MODE
  This mode will set the refrigerator temperature to 32°F for quick temperature drop when storing large amounts of warm or room temperature foods in the refrigerator. The unit will remain in FAST COOL mode for 2 hours and 30 minutes or until the temperature reaches 32°F and will then return to the original setting or until the function is turned off at the control panel. Both FAST COOL and FAST FREEZE can be run together at the same time. To enable the FAST COOL mode, press the feature button until the FAST COOL icon is illuminated. The icon will remain illuminated when activated. To disable the FAST COOL mode, press the function button until the FAST COOL icon is turned off.
• VACATION MODE
  Use this mode when leaving for long periods of time, where you will remove the large majority of the content from the refrigerator section but leave the freezer content. The Vacation mode will automatically set the refrigerator section at 41°F and the freezer section at -15°F. The unit will remain in the VACATION MODE until it is deactivated at the control panel. To enable the VACATION mode, press the feature button until the VACATION icon is illuminated. The icon will remain illuminated when activated. To disable the VACATION mode, press the function button until the VACATION icon is turned off.

NOTE: IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3 TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.

NOTE: WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR WHERE THE TEMPERATURE WILL DROP BELOW 32°F (0°C) OR RISE ABOVE 110°F (43°C). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER TEMPERATURES INSIDE THE REFRIGERATOR. FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 32° SET THE FREEZER TEMPERATURE CONTROL TO THE “COLDEST” SETTING. THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER THESE CONDITIONS.

Care and Maintenance

Cleaning Your Appliance

• Unplug the unit and remove the food and baskets.
• Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the baskets with a mild detergent solution.
• The outside of the unit should be cleaned with mild detergent and warm water.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your refrigerator-freezer if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food.

Vacation Time

Short vacations: Leave the unit operating during vacations of less than three weeks.

Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.

Moving Your Appliance

• Remove all the food.
• Securely tape down all loose items inside your unit.
• Turn the leveling screws up to the base to avoid damage.
• Tape the door shut.
• Be sure the unit stays in the upright position during transportation.

Energy Saving Tips

• The unit should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of direct sunlight.
• Let hot foods cool to room temperature before placing them in the unit. Overloading the unit forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on frost build-up inside the freezer.
• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time and close the door as soon as possible.

Troubleshooting Guide

Service for Your Appliance

We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can have the confidence that if you ever need additional information or assistance the Avanti Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

WIRING DIAGRAM

[Diagram of wiring is complex and cannot be represented here without an image. The following is a textual representation of the component list.]

Component List:

• a: POWER PLUG
• b: COMPRESSOR
• c: FREQUENCY CONVERTER
• d: SIGNAL
• f: DEFROST HEATER
• g: PROTECTOR
• h: FLIP BEAM HEATING WIRE
• i: DOWN F-DOOR SWITCH
• j: UP F-DOOR SWITCH
• k: RIGHT R-DOOR SWITCH
• l: LEFT R-DOOR SWITCH
• m: DEFROST SENSOR
• n: FREEZER SENSOR
• o: REFRIGERATOR SENSOR
• p: TEMP. AND HUMIDITY SENSOR
• q: DISPLAY BOARD
• r: FREEZER LIGHT
• s: REFRIGERATOR LIGHT
• t: FREEZER FAN
• u: CONDENSER FAN
• v: STEPPING MOTOR

Your Avanti Products Warranty

Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty.

WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti products will, at its option, repair or replace any part of the product which proves to be defective in material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the product has been installed and operated in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service center for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY

For the second through the fifth year from the date of original purchase, Avanti Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs involved to move the product to the service center and back to the user's home, as maybe required, are the user's responsibility.

WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti Products, including without limitation, one or more of the following:

• A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.
• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
• Content losses of food or other content due to spoilage.
• Incidental or consequential damages.
• Parts and labor costs for the following will not be considered as warranty:
  • Evaporator doors, door springs, and/or frames.
  • Inner door panels, door shelves, door rails, and/or door supports.
  • Vegetable crispers.
  • Light bulbs and/or plastic housing.
  • Plastic cabinet liners.
  • Punctured evaporator that voids the warranty on the complete sealed system.
• Shipping and handling costs associated with the replacement of the unit.
• Repairs performed by unauthorized servicers.
• Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or any other acts of God.
• Failure of the product if it is used for other than it intended purpose.
• The warranty does not apply outside the Continental USA.
• Surcharges including but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits for customer education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, pro-rates, or product replacement, once this warranty has expired.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following address within 100 days from the date of purchase and receive these important benefits:

Avanti Products LLC.
3265 Meridian Pkwy #114 – Weston, Florida 33331

Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.

Promote better products:

We value your input. Your responses will help us develop products designed to best meet your future needs.

-------------------------------------------------------(detach here)----------------------------------------------------------

Avanti Registration Card

Name: ___________________________________

Address: ___________________________________

City: __________________ State: ________ Zip: _________

E-mail Address: ___________________________________

Area Code: ________ Phone Number: ____________________

Did You Purchase An Additional Warranty

• Extended
• None

Reason for Choosing This Avanti Product:

Please indicate the most important factors That influenced your decision to purchase this product:

• Price
• Product Features
• Avanti Reputation
• Product Quality
• Salesperson Recommendation
• Other: ___________________
• Friend / Relative Recommendation
• Warranty
• Other: ___________________

Comments: ____________________________________________________________________________________________________

Occupation: ___________________________________

As your Primary Residence, Do You:

• Own
• Rent

Your Age:

• under 18
• 18-25
• 31-35
• 36-50
• 26-30
• over 50

Marital Status:

• Married
• Single

Is This Product Used In The:

• Home
• Business

How Did You Learn About This Product:

• Advertising
• In-Store Demo
• Personal Demo