IKEA LÖNSET Slatted Bed Base Assembly Instructions
This document provides instructions for assembling the IKEA LÖNSET slatted bed base.
Product Overview
The LÖNSET slatted bed base is designed to provide support and ventilation for your mattress. It is a key component for many IKEA bed frames.
Product Codes: 602.787.16, 202.787.18
Tools Required
A screwdriver is required for assembly. [Icon of screwdriver with a cross through it indicates not to use a power drill].
If you encounter difficulties during assembly, please refer to the IKEA website or contact IKEA customer support for assistance. [Icon of person looking confused, then person on phone outside IKEA store].
Parts Included
| Item | Description | Quantity |
|---|---|---|
| 1 | Allen key (100006) | 1x |
| 2 | Screws (100229) | 24x |
| 3 | Screws (109049) | 4x |
| 4 | Washers (100823) | 4x |
| 5 | Wooden slats | 20x |
| 6 | Wooden support beams | 32x |
| 7 | End caps/connectors | 6x |
| 8 | Slatted base sections | 2x |
| 9 | Fabric strap/support | 4x |
Assembly Steps
- Step 1: Attach the side supports to the slatted base sections. Insert screws (100229) using the Allen key (100006). Ensure the correct orientation as shown in the diagram. [Diagram showing two slatted base sections being connected with screws and an Allen key. Close-up shows correct insertion of screws into pre-drilled holes].
- Step 2: Connect the two slatted base sections. Use screws (100229) to secure the sections together. Pay attention to the alignment. [Diagram showing the two slatted base sections being joined. Close-up shows screws being inserted and tightened. An 'X' symbol indicates incorrect assembly].
- Step 3: Insert the wooden slats into the designated slots on the slatted base sections. Ensure each slat is firmly seated. [Diagram showing wooden slats being inserted into the base. Close-ups illustrate how the slats fit into the connectors].
- Step 4: Secure the wooden slats. Some slats may require additional fastening. Follow the diagram for correct placement and securing method. [Diagram showing slats being secured, possibly with clips or further screws. Close-ups show the mechanism for securing the slats].
- Step 5: Attach the fabric straps or support bands across the slatted base. These help to keep the slats in place and provide additional support. [Diagram showing the fabric straps being attached to the frame].
- Step 6: Secure the fabric straps. Use the provided screws (100229) and washers (100823) to fasten the straps. [Diagram showing screws and washers being used to attach the fabric straps. A close-up shows the correct way to insert the screw and washer].
- Step 7: Final assembly check. Ensure all screws are tightened and all components are securely in place. The assembled slatted bed base should be placed into the bed frame. [Diagram showing the completed slatted bed base being placed into a bed frame. An informational icon indicates a check or important note].
Important Notes
- Do not use power tools for assembly, as this may damage the product.
- Ensure all parts are accounted for before starting assembly.
- Refer to the diagrams carefully for correct component placement and orientation.
- The LÖNSET slatted bed base is compatible with various IKEA bed frames.
Care and Maintenance
Wipe clean with a damp cloth. Avoid harsh cleaning agents.
