Tchibo Storage Unit Assembly Instructions
Brand: Tchibo
Introduction
Welcome! Please keep these instructions for future reference. If you pass this product to someone else, ensure these assembly instructions are included. Assembly requires 2 people.
Safety Information
⚠️ DANGER: Risks for Children
- Keep packaging material away from children. Plastic bags and films are not toys and pose a suffocation risk if placed over the head or swallowed.
- The product contains small parts that can be life-threatening if swallowed. Keep children away during assembly.
- Keep infants away from the product as they may try to pull themselves up on it or climb it.
⚠️ CAUTION: Risk of Injury and Material Damage
- Be careful when assembling metal parts to avoid pinching fingers or injury from sharp edges/corners. Wear work gloves.
- Always place the product on a level, non-sloping surface.
- Do not stand or sit on the product, as it could tip over or be damaged.
- For optimal stability, the product must be fastened to a suitable wall. Do not place it freely in a room or against a wall without securing it.
- The provided wall mounting material (screws and wall plugs) is suitable for standard, solid walls. Before mounting, consult a professional or check your wall type for appropriate mounting hardware. Ensure no pipes or electrical wiring are present behind the drilling location.
- Assemble the product on a soft, flat surface, using the transport cardboard underneath to prevent scratches.
- Use the product only for its intended purpose and do not overload it.
- Do not open and load more than one folding door at a time to prevent tipping.
Intended Use
This product is suitable for indoor use only. Protect it from moisture. It is designed for private household use and is not suitable for commercial purposes.
Care Instructions
Do not use abrasive or caustic cleaning agents or hard brushes. Clean surfaces with a slightly damp cloth and wipe dry.
Unpacking and Disposal
Carefully remove all packaging material and dispose of it properly, sorting it according to local recycling guidelines. Ensure no assembly materials are accidentally discarded.
Weight Limits
- Top Surface: Maximum 40 kg
- Shelf: Maximum 40 kg
- Drawer/Door Load: Maximum 5 kg
Parts List
| Part ID | Description | Quantity | Notes |
|---|---|---|---|
| 1 | Frame Part | 2x | Main structural component |
| 2 | Back Panel | 5x | Thin panels for the rear of the unit |
| 3 | Handle | 2x | For opening doors/drawers |
| 4 | Shelf | 6x | Adjustable shelves |
| 5a | Drawer Runner (Left) | 2x | For drawer assembly |
| 5b | Drawer Runner (Right) | 2x | For drawer assembly |
| A | Drawer Front/Base | 2x | Part of the drawer structure (for models 629 549, 629 551, 629 553) |
| B | Drawer Front/Base | 2x | Part of the drawer structure (for model 629 555) |
| C | Bracket | 4x | For wall mounting and top support |
| D | Screw Cap | 4x | Decorative covers for screws |
| E1 | Handle Screw | 2x | For attaching handles |
| E2 | Handle Washer | 2x | For attaching handles |
| F | Wall Screw | 4x | For securing brackets to the wall |
| G | Shelf Support Peg | 4x | To support shelves |
| H | Foot | 4x | Adjustable feet for the unit |
| I | Foot Cap | 4x | Covers for the feet |
| J | Connector/Dowel | 12x | Used for frame assembly |
| K | Runner Screw | 16x | For attaching drawer runners |
| L | Allen Key | 1x | Tool for assembly |
| S1 | Screw | 12x | General assembly screws |
| S2 | Wall Plug | 4x | For wall mounting |
| S3 | Screw | 6x | For securing back panels |
| S4 | Screw | 16x | For drawer runner assembly |
| S5 | Hinge Screw | 8x | For attaching hinges |
Note: Handle design may vary depending on the unit's color.
Assembly Steps
Step 1: Frame Assembly
Take two frame parts (1). Align the pre-drilled holes. Insert screws (S1) through the holes and secure them with connector part (J). Repeat for all frame connections as shown. Ensure the frame is square and stable.
Step 2: Attaching Side Panels
Attach the side panels (1) to the assembled frame. Align the holes and secure them using screws (S1) and connector part (J).
Step 3: Attaching Back Panels
Slide the back panels (2) into the grooves on the frame. Ensure they are fully seated.
Step 4: Securing Back Panels
Use screws (S3) to secure the back panels (2) to the frame. Insert screws into the designated holes.
Step 5: Inserting Shelves
Slide the shelves (4) into the unit. They will click into place when properly inserted.
Step 6: Assembling Drawer Runners (Part 1)
Take drawer base/front (A) and attach the drawer runners (5a) using screws (S4) and part K. Ensure the runners are oriented correctly.
Step 7: Assembling Drawer Runners (Part 2)
Take drawer base/front (B) and attach the drawer runners (5b) using screws (S4) and part K. Ensure the runners are oriented correctly.
Step 8: Inserting Drawers
Carefully insert the assembled drawers (5a and 5b) into the unit. They will click into place when fully inserted.
Step 9: Attaching Handles
Attach the handles (3) to the drawer fronts (A and B). Insert screws (E1) through the inside of the drawer front and into the handle, using washers (E2) if provided.
Step 10: Hinge Caution
⚠️ Be careful when pulling out the hinge (S5). There is a risk of pinching your fingers.
Step 11: Top Support and Levelling
Attach the top support bracket (C) to the unit. Adjust the feet (H) to ensure the unit is level on the floor.
Step 12: Preparing for Wall Mounting
For wall mounting, attach brackets (C) to the unit frame. Drill holes of approximately ∅ 6 mm into the wall at the desired mounting points. Insert wall plugs (S2) into the holes. Secure the brackets (C) to the unit using screws (F).
Step 13: Securing to the Wall
Align the unit with the wall brackets. Screw through the brackets (C) into the wall plugs (S2) to secure the unit to the wall.
Service and Support
For product information, ordering accessories or replacement parts, or for any service-related questions, please contact Tchibo Customer Service. Please provide the article number and the replacement part order number when contacting them.
Contact: service@tchibo.de
Visit: www.tchibo.de/service
