Tchibo Modular Storage Unit Assembly Instructions

Introduction

Welcome to the assembly instructions for your new Tchibo modular storage unit. Please read these instructions carefully before beginning assembly. Keep this guide for future reference.

This assembly requires two people. ?‍?‍?

Safety Information

⚠️ DANGER: Risks to Children

• Keep packaging material away from children. Plastic bags and films are not toys. Ensure children do not pull them over their heads or swallow parts. Risk of suffocation!
• The product includes small parts that can be life-threatening if swallowed. Keep children away during assembly.
• Keep infants away from the product, as they may try to pull themselves up on it or climb onto it.

❗ CAUTION: Risk of Injury and Material Damage

• Be careful when assembling metal parts to avoid pinching fingers or injury from sharp edges/corners. Wear work gloves. ?
• Always place the product on a level, non-sloping surface.
• Never stand or sit on the product, as it could fall over or be damaged.
• Do not place the product freely in a room or against a wall without securing it. For optimal stability, it must be fastened to a suitable wall.
• Wall mounting materials (screws and wall plugs) are provided. These are suitable for standard, solid walls. Consult a professional for materials suitable for your specific wall type. Ensure no pipes or electrical wiring are behind drilling points.
• Assemble the product on a soft, even surface. Use the transport cardboard underneath to prevent scratching or damaging surfaces.
• Use the product only for its intended purpose and do not overload it. ⚖️
• Do not open and load more than one folding door at a time. Risk of tipping over!

Intended Use

This product is suitable for indoor use. Protect it from moisture. It is designed for home use and is not suitable for commercial purposes.

Care and Maintenance

Do not use abrasive or caustic cleaning agents or hard brushes. Clean surfaces with a slightly damp cloth and wipe dry.

Unpacking and Disposal

Carefully remove all packaging material and dispose of it properly. Ensure you do not accidentally discard assembly materials.

Parts List

The following parts are included in your assembly kit. Please check that all parts are present before starting.

Screws and Fasteners:

Required for Assembly:

• Screwdriver (manual recommended, electric screwdriver with low torque setting advised) ?️
• Work gloves ?
• Spirit level (for final adjustment) ?

Assembly Steps

Follow these steps carefully. Two people are recommended for assembly.

Step 1: Frame Assembly

Description: Assemble the main frame of the storage unit using the provided rods and connectors.

Diagram: Shows the basic frame structure of the storage unit, indicating where the initial rods and connectors are to be assembled.

Step 2: Attaching Rods

Description: Insert and secure 6 x S1 rods into the frame.

Diagram: Shows the insertion of six 'S1' long screws into specific points on the frame structure.

Step 3: Aligning Holes

Description: Ensure all holes are properly aligned for the next steps.

Diagram: Illustrates aligning holes on the frame components to ensure proper fit for subsequent steps.

Step 4: Hand-tightening Rods

Description: Turn the rods (part 3) by hand until snug, but do not overtighten. Do not overtighten!

Diagram: Shows multiple people (implied by the '2 people' icon ?‍?‍?) hand-tightening rods (labeled '3') into the frame. A warning icon indicates not to overtighten.

Step 5: Inserting Panels

Description: Insert the back panels (labeled '7') into the frame structure. Arrows indicate the direction of insertion.

Diagram: Shows the insertion of back panels (labeled '7') into the frame structure. Arrows indicate the direction of insertion.

Step 6: Securing Panels

Description: Secure the back panels using screws (S4) and fasteners (H). Close-up views illustrate the screw insertion and fastener placement.

Diagram: Shows securing the back panels using small screws (labeled 'S4') and fasteners (labeled 'H'). Close-up views illustrate the screw insertion and fastener placement.

Step 7: Configuration Choice (A or B)

Description: Decide whether the narrow compartments will be on the right (Option A) or left (Option B). This guide illustrates Option A. Fit back panels 6 and 7 accordingly.

Diagram: Shows the frame being oriented to choose between configuration A (narrow compartments on the right) or B (narrow compartments on the left). The illustration then proceeds with Option A, showing the attachment of back panels (labeled '6' and '7').

Step 8: Assembling Drawer/Door Mechanisms (Part 8a)

Description: Attach the mechanism part 8a to the corresponding panel (part 8). Screws (labeled 'S5') and nuts (labeled 'J') are used. A close-up view highlights the connection points.

Diagram: Shows the assembly of the drawer/door mechanism part '8a' onto a panel (labeled '8'). Screws (labeled 'S5') and nuts (labeled 'J') are used. A close-up view highlights the connection points.

Step 9: Assembling Drawer/Door Mechanisms (Part 8b)

Description: Attach the mechanism part 8b to the corresponding panel (part 8). Screws (labeled 'S5') and nuts (labeled 'J') are used. A close-up view highlights the connection points.

Diagram: Shows the assembly of the drawer/door mechanism part '8b' onto a panel (labeled '8'). Screws (labeled 'S5') and nuts (labeled 'J') are used. A close-up view highlights the connection points.

Step 10: Flipping Panels

Description: Flip over panel 9 to its other side.

Diagrams: Show panel '9' being flipped over to its opposite side.

Step 11: Installing Doors

Description: Install the doors (parts 8a and 8b) with their mechanisms (part 9) into the unit. You will hear a click ? when they are correctly seated.

Diagram: Shows the installation of the doors (parts 8a and 8b) with their associated mechanisms (part 9) into the main unit. Arrows indicate the movement, and 'Click!' sound icons suggest secure locking.

Step 12: Attaching Hinges to Doors

Description: Attach hinges (part S6) to doors 4 and 5 using screws. Be careful when pulling out the hinge. Risk of getting your fingers caught!

Diagram: Shows the attachment of hinges (part S6) to doors 4 and 5. Close-up views show the hinge being attached with screws.

Step 13: Final Adjustments

Description: Adjust the feet of the unit using a spirit level ? to ensure it is stable and level.

Diagram: Shows the unit being leveled. One close-up shows adjusting the feet (part D) at the bottom of the unit. Another shows using a spirit level (with a T-bar) on top of the unit to ensure it is horizontal. A bracket (C) is also shown.

Step 14: Wall Mounting Preparation

Description: Prepare for wall mounting by attaching brackets (F) to the unit using screws (C) and wall plugs/screws (S3). The required hole diameter (Ø 6 mm) is indicated.

Diagram: Illustrates the wall mounting process. It shows attaching wall brackets (F) to the unit using screws (C) and wall plugs/screws (S3). The required hole diameter (Ø 6 mm) is indicated.

Step 15: Securing to Wall

Description: Secure the unit to the wall using screws (S3) through the brackets.

Diagram: Shows the final step of securing the unit to the wall using the previously attached brackets and screws.

Replacement Parts

If any parts are missing or defective, please refer to the list below for ordering information. Contact Tchibo customer service for assistance.

Service and Support

For product information, accessories, replacement parts, or service inquiries, please contact Tchibo customer service. Please provide the article number (693 067) and the replacement part order number when contacting us.

Customer Service - Germany:

• Phone: 040 60 02 79 00
• Online Services: www.tchibo.de/service
• Contact: www.tchibo.de/contact
• Replacement Parts: www.tchibo.de/möbel-ersatzteile

Customer Service - Austria:

• Phone: 0800 400 235 (Toll-free)
• Online Services: www.tchibo.at/service
• Contact: www.tchibo.at/contact

Customer Service - Switzerland:

• Phone: 043 88 33 099
• Online Services: www.tchibo.ch/service
• Contact: www.tchibo.ch/contact

Customer Service - Czech Republic:

• Customer Service: 800 900 826 (Toll-free)
• Online Services & FAQ: www.tchibo.cz/faq
• Contact: www.tchibo.cz/contact

Customer Service - Poland:

• Customer Service Line: 801 080 016
• Online Services & Help: www.tchibo.pl/pomoc-i-uslugi
• Contact: www.tchibo.pl/contact

Customer Service - Slovakia:

• Customer Service: 0800 212 313 (Toll-free)
• Online Services & FAQ: www.tchibo.sk/faq
• Contact: www.tchibo.sk/contact

Customer Service - Hungary:

• Customer Service: 06-80-021-375 (Toll-free)
• Online Services & FAQ: www.tchibo.hu/GYIK
• Contact: www.tchibo.hu/contact

Customer Service - Turkey:

• Technical Support Hotline: 444 2 826 (Charged)
• Hours: Monday - Sunday, 09:00 - 19:00
• Email: servis@tchibo.com.tr