Tchibo 693 063 Shelving Unit Assembly Instructions
Brand: Tchibo
Model: 693 063
Important Information Before Assembly
Please read these instructions carefully before assembling the article. Keep these instructions for future reference. If you pass the article on to someone else, please also hand over these assembly instructions.
Safety Warnings:
- Danger to Children: Keep packaging material away from children. Bags and films are not toys. Ensure children do not pull them over their heads or swallow any parts, as this poses a suffocation risk [⚠]. The product contains small parts that can be life-threatening if swallowed; keep children away during assembly. Keep infants away from the product as they may try to pull themselves up on it or climb onto it.
- Caution - Risk of Injury and Material Damage: Be careful during assembly to avoid pinching fingers or injuring yourself on sharp edges or corners when installing metal parts. Wear work gloves [✎]. Always place the product on a level, non-sloping surface. Do not stand or sit on the product, as it could tip over or become damaged. Do not place the product freely in a room or against a wall without securing it. For optimal stability, the product must be fastened to a suitable wall. The provided wall mounting material (screws and wall plugs) is suitable for standard, solid walls. Before wall mounting, consult with a professional about the appropriate mounting material for your specific wall. Ensure there are no pipes or electrical wiring at the drilling location. Assemble the product on a soft, flat surface, using the transport cardboard underneath to prevent scratches or damage to surfaces. Use the product only for its intended purpose and do not overload it. Do not open and load all flap doors simultaneously, as this poses a tipping hazard [⚠].
Intended Use
This product is suitable for indoor use only. Protect it from moisture. It is designed for private household use and is not suitable for commercial or professional purposes.
Care Instructions
Do not use abrasive or caustic cleaning agents or hard brushes. Clean surfaces with a slightly damp cloth and then wipe dry with a clean cloth.
Unpacking and Disposal
Carefully remove all packaging material and dispose of it properly according to local recycling guidelines. Ensure you do not accidentally discard any assembly materials.
Parts List
The following parts are included:
Item | Part Number | Item | Part Number | Item | Part Number |
---|---|---|---|---|---|
1 | 5069097 | A | 5069102 | S1 | 5069114 |
2 | 5069098 | B | 5069103 | S2 | 5069115 |
3 | 5069099 | C | 5069104 | S3 | 5069116 |
4 | 5069100 | D | 5069105 | S4 | 5069117 |
5 | 5069101 | E1 | 5069106 | S5 | 5069118 |
E2 | 5069107 | ||||
F | 5069108 | ||||
G | 5069109 | ||||
H | 5069110 | ||||
I | 5069111 | ||||
J | 5069112 | ||||
K | 5069113 |
Assembly Steps
- Step 1 (Page 10): Assemble the main frame. Attach the two base frames (Part 1) to the two side frames (Part 2) using 16 x S1 screws. Ensure holes are aligned.
- Step 2 (Page 10): Continue frame assembly. Attach the other base frame (Part 1) to the side frames (Part 2) using 16 x S1 screws.
- Step 3 (Page 11): Insert the three shelves (Part 3) into the frame. Push each shelf until it clicks into place [☑].
- Step 4 (Page 11): Attach four brackets, labeled '4', to the top and bottom of the frame using 8 x S3 screws.
- Step 5 (Page 12): Insert the three shelves (Part 3) into the frame again, pushing until they click [☑].
- Step 6 (Page 13): Attach the left drawer runners (Part 5a) to the inside of the frame using 3 x Part A brackets and 24 x S4 screws.
- Step 7 (Page 13): Attach the right drawer runners (Part 5b) to the inside of the frame using 3 x Part B brackets and 24 x S4 screws.
- Step 8 (Page 14): Insert the assembled drawers (with runners attached) into the frame. Push each drawer until it clicks into place [☑].
- Step 9 (Page 15): Attach the hinge mechanisms (Parts E1 and E2) to the drawer fronts (Part 4).
- Step 10 (Page 15): Attach the drawer fronts (Part 4) to the cabinet. Be careful when pulling out the hinge mechanism; there is a risk of getting your fingers caught [⚠].
- Step 11 (Page 16): Adjust the feet (Part C) at the bottom of the unit to ensure it is level.
- Step 12 (Page 17): Attach the support brackets (Part F) to the frame using 4 x S2 screws and 4 x J washers.
- Step 13 (Page 18): Attach the top panel, labeled '4', to the assembled frame using the remaining screws.
Service Information
If a part is missing or defective, please refer to the service information at the end of this manual.
For product information, accessories, replacement parts, or service inquiries, please contact Tchibo customer service. Please provide the article number and replacement part order number.
Germany Customer Service:
Website for spare parts: www.tchibo.de/moebel-ersatzteile
Phone: 040 60 02 79 00
Online Services: www.tchibo.de/service
Contact: www.tchibo.de/contact
Austria Customer Service:
Phone: 0800 400 235 (toll-free)
Online Services: www.tchibo.at/service
Contact: www.tchibo.at/contact
Switzerland Customer Service:
Phone: 043 88 33 099
Online Services: www.tchibo.ch/service
Contact: www.tchibo.ch/contact
Czech Republic Customer Service:
Customer Service: 800 900 826 (free)
Online Services: www.tchibo.cz/faq
Contact: www.tchibo.cz/contact
Poland Customer Service:
Customer Service Line: 801 080 016
Online Services: www.tchibo.pl/pomoc-i-uslugi
Contact: www.tchibo.pl/contact
Slovakia Customer Service:
Customer Service: 0800 212 313 (free)
Online Services: www.tchibo.sk/faq
Contact: www.tchibo.sk/contact
Hungary Customer Service:
Customer Service: 06-80-021-375 (toll-free)
Online Services: www.tchibo.hu/GYIK
Contact: www.tchibo.hu/contact
Turkey Customer Service:
Customer Service Phone: 444 2 826 (paid)
Monday - Sunday 09:00 - 19:00
Email: servis@tchibo.com.tr