Artemide Yanzi Floor Lamp

Product Overview

The Artemide Yanzi is a floor lamp designed by Neri & Hu. This document provides installation instructions, usage guidelines, and product information.

The lamp is suitable for ? INDOOR use and can also be used ? OUTDOOR (refer to specific product variants if applicable).

Key Features:

• CE Certified
• IP20 Rated [Ingress Protection 20]
• LED Lighting
• [Power Source Symbol]
• [Electrical Plug Symbol] ?

Safety and Assembly Preparation

⚠️ Before proceeding, please read all instructions carefully. Assembly may require two people ?.

Included Components:

The package typically contains:

• Lamp pole and structure
• Base
• Power adapter
• Assembly hardware (screws, nuts, washers)
• Instruction manual

Ensure all parts are present before starting assembly. Refer to the diagrams for visual guidance.

Installation Instructions

Follow these steps for assembly:

Step 1: Assemble the Base

Attach the threaded rod to the base. Use the provided Allen key ? to securely tighten the nut.

Diagram Description: A close-up view shows a threaded rod being inserted into the lamp base. A washer and nut are placed, and an Allen key is used to tighten the assembly.

Step 2: Attach the Pole to the Base

Connect the main lamp pole to the assembled base. Secure it using the provided screws and washers. A tool may be required for tightening.

Diagram Description: The lamp pole is shown being fitted onto the base. Hands are depicted holding tools to fasten the pole with screws and washers.

Step 3: Position the Lamp

Carefully move the assembled lamp to its desired location. Ensure it is stable and upright.

Diagram Description: The floor lamp is shown being maneuvered into an indoor space, near a piece of furniture like a table.

Step 4: Install Light Shades

Attach the decorative light shades or globes to the top of the lamp structure. Ensure they are securely fitted according to the design.

Diagram Description: A detailed view of the lamp's upper section shows how to place the glass shades onto their respective holders. Arrows indicate the correct placement and orientation.

Step 5: Connect Power

Plug the power adapter into the lamp and then into a suitable electrical outlet. ?

Note: The plug type shown may vary. For USA/Canada, a specific plug configuration is indicated.

Diagram Description: The lamp is shown connected to a wall socket. A magnified view shows a plug labeled "For USA/Canada Only" and the corresponding outlet configuration.

Usage and Care

Operation:

The lamp is operated via a switch, which may include dimming capabilities. ?

Diagram Description: A finger is shown pressing a light switch. Icons illustrate brightness adjustment controls.

Bulb Selection:

⚠️ Use only compatible light bulbs. Refer to the icons for correct bulb types (✔️) and incorrect types (❌).

Diagram Description: A person icon is shown near an electrical outlet. Speech bubbles display correct bulb icons with checkmarks and incorrect bulb icons with crosses, indicating the need to use the specified bulb types and wattages.

Cleaning:

To clean the lamp, use a soft, dry cloth. For stubborn marks, a slightly damp cloth may be used, followed by a dry cloth. Avoid abrasive cleaners.

Diagram Description: A hand is shown holding a cloth and wiping a surface. A spray bottle icon suggests using a cleaning agent if necessary.

Contact Information

For inquiries, support, or warranty information, please contact Artemide:

Product Code: Y513000882D