Assembly Instructions
42968665 EXTENDABLE SHOE RACK
ATTENTION: DO NOT TIGHTEN THE SCREWS UNTIL THE PRODUCT IS FULLY ASSEMBLED. FOR INDOOR USE ONLY. MAXIMUM SAFE LOAD: 3 KILOGRAMS PER TIER.
Hardware list
| Item | Description | Quantity |
|---|---|---|
| A | 6x35mm Screw | 12PCS |
| B | Hex Key | 1PC |
| C | Strap | 1PC |
| D | Wall Plug | 1PC |
| E | 4x35mm Screw | 1PC |
| F | Grip fastener | 2PCS |
| 1 | Bamboo Frame | 1PC |
| 2 | Bamboo Frame | 1PC |
| 3 | Tube | 6PCS |
WARNING: IF STACKING THE SHOE RACKS, IT IS STRONGLY RECOMMENDED THAT THE PRODUCT IS PERMANENTLY FIXED TO THE WALL. REGULARLY CHECK THAT ANCHORS ARE SECURELY MAINTAINED.
CAUTION: For your safety, when attaching the anchor fixings, please note the following: Check any electrical wires or plumbing inside the wall before drilling any holes. If you are unsure, please seek professional advice from a qualified tradesperson.
WARNING: PLEASE SECURE YOUR FURNITURE WITH THE SUPPLIED WALL FIXING. SCAN THE CODE FOR MORE INFORMATION.
TOPPLING HAZARD
Assembly Steps
STEP 1
Attach the side panels using screws (A) and the hex key (B). Then, attach the bamboo frames (1 and 2) to the side panels using screws (A).
[Diagram Description: Two side panels are shown being joined by screws (A) using a hex key (B). Bamboo frames (1 and 2) are then positioned and secured to the side panels with screws (A).]
STEP 2
Insert the tubes (3) into the pre-drilled holes on the side panels. The shoe rack is extendable; slide the side panels apart to adjust the width.
[Diagram Description: Tubes (3) are shown being inserted into the frame. An arrow indicates the extendable nature of the shoe rack, showing the side panels can be pulled apart.]
STEP 3: Optional Stacking
To stack multiple units, place one shoe rack unit on top of another. Ensure they are aligned correctly before proceeding.
[Diagram Description: Two assembled shoe rack units are shown. Arrows indicate that the top unit is being placed directly onto the bottom unit for stacking.]
STEP 4
Secure the unit to the wall using the supplied wall fixing kit. This kit includes wall plugs (D), screws (E), and straps (C). Attach the grip fasteners (F) to the straps for securing the unit.
[Diagram Description: A close-up shows the wall fixing components: a wall plug (D) inserted into a wall, a screw (E) passing through a strap (C) and into the wall plug. Grip fasteners (F) are shown attached to the straps.]
