Baby Trend Trend High Chair - Instruction Manual

Model # 8863

Convenience through Innovation and thoughtful design

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

⚠️ WARNINGS

⚠️ WARNING: Retain these instructions for future reference. Failure to follow these instructions could result in serious injury or death.
⚠️ WARNING: The tray is not designed to hold the child in the chair. The child is to be secured by the safety harness at all times while in the high chair.
⚠️ WARNING: Prevent serious injury or death from falls or sliding out. Always secure child in the 5-point harness system, either in the reclining, semi-reclining or upright position. The tray is not designed to hold the child in the chair. Always keep child in view while in high chair. Never leave child unattended. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. See page 4 for instructions on proper use of restraint system.

* Accessory items may change the balance of the high chair and cause hazardous unstable conditions.

* Be certain the high chair is fully erect and latched in the open position before allowing the child near the high chair.

* Use of the high chair with a child weighing more than 40 pounds will cause excessive wear and stress on the high chair.

* Never allow your high chair to be used as a toy.

* To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.

* Check your high chair for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

* Discontinue use of the high chair should it malfunction or become damaged. Please contact our customer service Parts Hotline to arrange for repair or obtain replacement parts.

If you experience any difficulty with the use of our product or have a question regarding these instructions, please contact our Customer Service Department at 1-800-328-7363 between the hours of 8:00 am and 4:30 pm Pacific Standard Time. Please do not return to the store as once it is returned it cannot be resold and the materials and energy used to make it are wasted.

Baby Trend, Inc. 1567 S. Campus Ave. Ontario, CA 91761

Parts Hotline: 1-800-328-7363 8:00 am and 4:30 pm Pacific Standard Time

Contents Overview

This manual covers the following components: Seat, Tray, Dishwasher safe food tray, Casters.

INSTRUCTIONS

To Assemble Frame

Carefully remove the high chair from the box. The high chair is shipped fully assembled except for the casters and tray. Depress the fold release buttons located on the top of the frame and push the legs apart until fully open and locked. (See Figure 1: Diagram showing how to depress the fold release button and open the frame).

⚠️ WARNING: Always check that the high chair is locked in the open position before using.

To Attach Wheels

Step 1. To attach the wheels, gently lay the frame on its side.

Step 2. Insert wheels into the bottom of the frame. Apply pressure until wheels feel secure (wheels do not click into place). (See Figure 2: Diagram showing how to attach wheels to the frame).

Repeat for the remaining wheels.

To Attach and Operate Tray

To attach the tray, line up the grooves on the bottom of the tray with the armrests of the high chair. Squeeze the tray release handle (See Figure 3: Diagram showing the tray release handle) and slide the tray onto the armrest (See Figure 4: Diagram showing how to attach the tray to the armrests). The tray has a 3-position adjustment. (See Figure 5: Diagram illustrating the 3-position tray adjustment).

To adjust the position, squeeze the tray release handle located underneath the tray and reposition the tray to the desired position. Release the tray release handle. Check that the tray is securely locked in its new position. The dishwasher safe food tray snaps onto the high chair tray and is held in place by tabs on either side of the tray. When installing the food tray, make sure that it snaps into place to prevent the child from removing the food tray. To remove the food tray, carefully lift outward on the tabs on each side.

Recline Seat

Squeeze the recline lever on the back of the seat and adjust to the preferred recline or upright position. (See Figure 6: Diagram showing how to use the recline lever to adjust the seat position).

⚠️ WARNING: It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position.

⚠️ WARNING: Prevent serious injury or death from falls or sliding out. Always secure child in the restraint system, either in the reclining, semi-reclining or upright position.

To Use Safety Belt

The tray is not designed to hold the child in the chair. Always keep child in view while in high chair. Never leave child unattended.

Step 1. Place your child's arms through the loops formed by the shoulder and waist straps. Place the crotch strap between your child's legs. Insert the harness buckles into the center buckle to fasten. (See Figure 8: Diagram showing how to fasten the safety harness buckles).

Step 2. Adjust shoulder and waist straps for your child's comfort and safety by sliding buckles in either direction. Safety straps are to fit snug around your child. (See Figure 7: Diagram showing how to adjust the safety harness straps for a snug fit).

To Release Safety Belt

Step 1. Squeeze sides of buckles to release. (See Figure 9: Diagram showing how to release the safety harness buckles).

To Adjust Seat Height

⚠️ WARNING: Do not adjust seat height with child in seat. Adjust seat height before placing your child in the high chair.

Step 1. Squeeze the levers on the height adjustment bracket and adjust to the ideal position. (See Figure 9: Diagram showing seat height adjustment, likely referencing the same figure as belt release for context).

⚠️ WARNING: Always check that the height adjustment bracket is level and both left and right sides locked before placing child in the high chair.

To Fold High Chair

The high chair may be folded with the seat in any of the height positions. The high chair will be most compact with the seat in the lowest position, though the tray will only hang with the seat in the highest position.

Step 1. Place seat in the desired height position.

Step 2. Place seat back in the most upright position.

Step 3. Squeeze the tray release handle and slide the tray out. (See Figure 10: Diagram showing how to detach the tray and the cutout for hanging it). Hang the tray on the hooks located on the back of the rear leg. (See Figure 11: Diagram showing the hooks on the rear leg for hanging the tray).

Step 4. Fold up the footrest. (See Figure 12: Diagram showing how to fold up the footrest).

Step 5. Depress the release buttons (located on the sides of the frame) and push the front legs in the direction of the rear legs until locked. (See Figure 13: Diagram showing how to depress release buttons and fold the legs). Chair is now ready to put away. (See Figure 14: Diagram showing the folded high chair).

To Unfold High Chair

Depress the fold release buttons located on the top of the frame and push the legs apart until fully open and locked. (See Figure 1: Diagram showing how to depress the fold release button and open the frame).

⚠️ WARNING: Always check that the high chair is locked in the open position before using.

CARE AND MAINTENANCE

Dishwasher Safe Food Tray

The food tray is dishwasher safe to 160° Fahrenheit. Do not use scouring pads on the dishwasher food tray as they will damage the surface and make it more difficult to clean.

High Chair/Tray

Clean the high chair after each use using mild household detergents. Use only a soft bristle brush, sponge, or cloth to surface clean or remove particles of food. DO NOT submerge the high chair tray in water; surface clean only. (See Figure 14: Diagram showing the high chair, possibly indicating cleaning points).

To Remove Pad for Washing

Unsnap the shoulder straps from the waist belt buckle and push through the hole in the pad. Push waist belt buckles and crotch strap through holes in the pad. Gently pull upward on the pad to remove.

Wash the pad with warm water, soap, and a sponge for light stains. For a complete wash, DRY CLEAN ONLY. DO NOT MACHINE WASH OR DRY SEAT PAD. DO NOT USE BLEACH. Hang to dry.

Replace the pad and rethread the safety harness in reverse order.

From time to time, check your high chair for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

Excessive exposure to the sun or heat could cause fading, yellowing, or warping of parts.

? STOP

IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-328-7363 BETWEEN THE HOURS OF 8:00 AM AND 4:30 PM PACIFIC STANDARD TIME FOR ASSISTANCE.