Technical Datasheet
BLOQUE BATH PILLAR TAPS (PAIR)
SKU: BQ34
TECHNICAL DRAWING
Diagram Description: The technical drawing shows the dimensions of the Bloque Bath Pillar Taps (Pair). It includes front and side views with measurements indicated. Key dimensions shown are 35mm, 128.5mm, 91mm, 54.5mm, Max 35mm, G3/4" thread size, and 127.5mm.
| Attribute | Value |
|---|---|
| Weight | 0.0055 m³ |
| Range | Bloque |
Dimensions are in millimeters except thread sizes which are BSP imperial.
Notes
Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
This does not affect your statutory rights.
Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.
