Technical Datasheet
IVO BATH PILLAR TAPS (PAIR)
SKU: IV34
TECHNICAL DRAWING
Dimensions:
Overall Height: 115.5 mm
Max Height: 35 mm
Spout Reach: 78.5 mm
Spout Height: 59 mm
Base Diameter: Ø45 mm
Tap Hole Diameter: G3/4"
Base Width: 113 mm
Weight: 0.0025 m³
Range: Ivo
Note: Dimensions are in millimeters except thread sizes which are BSP imperial.
NOTES
Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions. All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months. Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI. This does not affect your statutory rights.
Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.
