Vanguard Scout Loudspeakers Owner's Manual | Vera-Fi Audio

Vanguard Scout Loudspeakers Owner's Manual

Introduction

Thank you for your purchase of the Vanguard Scout Loudspeakers! Please retain this manual for setup instructions and tips as well as contact information should you need to file for warranty repair.

Safety Instructions

  • Read and follow all instructions listed in this manual.
  • Keep away from any sources of heat, such as heaters, radiators, stoves, or amplifiers.
  • Keep away from water and moisture. Do not place plants on or near the appliance. INDOOR USE ONLY!
  • Clean only with a dry, cotton or microfiber cloth.
  • No user-serviceable parts inside. Please refer any and all service to qualified service personnel by contacting Vera-Fi Audio.

Getting Started

Connecting Your Speakers

Scout comes standard with a single set of 5-Way binding posts for each speaker that accept either banana plugs, pins, spades, or bare/tinned wire.

When Using Bare or Tinned Wire

Ensure that only the necessary amount of wire is exposed and in all manner of connections maintain proper distancing between conductors. Shorted cables across the terminals could damage your amplifier or speakers.

Attach positive (+) to the red terminal and negative (-) to the black terminal. This connection should correlate to the connections from your amplifier for proper phase.

Placement and Positioning

Speaker placement is a personal preference and is room dependent for best acoustics.

For Best Performance

The speakers should be placed on a solid surface that will not vibrate or resonate, speaker stands being the best option. Tweeters should be at ear level at your listening position. Should bass be overpowering due to being close to a wall.

Optional

You can block the rear port with foam to reduce resonance and room interaction.

Specifications

Drivers 1 x 5.25" treated paper cone woofer
1x 25mm silk dome tweeter
Sensitivity 84.5dB
Power Handling 50W
Nominal Impedance 8 Ω

Installing and Removing Grill

The grill is held on by pins.

To Remove

Gently hold the grill and pull straight away from the speaker.

To Install

Align the pins and push into place.

Vanguard Scout Care

Warranty

Vanguard Scout comes with a 3-year limited warranty that includes parts and labor for production and material defects.

This warranty does NOT cover:

  • Accidents, abuse, poor maintenance, or otherwise inappropriate use
  • Transportation cost to repair center
  • Any attempts to self repair, or otherwise modify the speaker

Should any issues arise, please contact Vera-Fi Audio for an Return Merchandise Authorization (RMA) number and address for repair. Please retain original packaging.

Distributors

U.S.A.

Canada

Europe & UK

Sweden

Thailand

  • Tombo Audio
    7 Ratchadaphisek Rd. Din Daeng, Bagkok, Thailand 10400
    +66 84 241-4496 / +66 65 462-6254
    contact@tombo-audio.com

Singapore & China

Romania

Contact Information

This Owner's Manual is current as of October 2024. For more information and clarification about Vanguard Scout, please contact: sales@verafiaudiollc.com

Vera-Fi Audio, LLC
3533 Old Conejo Road, Newbury Park, California 91320, United States
sales@verafiaudiollc.com
+1 (818) 584-6870

© Vera-Fi Audio, LLC 2024

PDF preview unavailable. Download the PDF instead.

Vanguard Scout Owner s Manual compressed ?v=1728648623 iLovePDF

Related Documents

Preview Vanguard Caldera 10 Subwoofer Owner's Manual | Vera-Fi Audio
Comprehensive owner's manual for the Vanguard Caldera 10 compact active subwoofer by Vera-Fi Audio. Includes setup, positioning, connections, calibration, maintenance, troubleshooting, and warranty information.
Preview Vera-Fi Audio Vibration Black Hole Standard Spikes Quick Start Manual
Quick start guide for Vera-Fi Audio's Vibration Black Hole Standard Spikes, detailing parts, setup, and usage for optimal audio equipment isolation and vibration dampening.
Preview Vera-Fi Audio Vibration Black Hole M6 Thread Spikes Quick Start Guide
Comprehensive quick start guide for Vera-Fi Audio's Vibration Black Hole (VBH) M6 Thread Spikes, detailing parts, usage instructions, and performance measurements for audio equipment.
Preview Swiss Digital Fuse Box Instruction Manual | Vera-Fi Audio
Detailed instructions for installing and using the Swiss Digital Fuse Box by Vera-Fi Audio. Includes troubleshooting and distributor information for this audiophile-grade audio accessory.
Preview Vera-Fi Audio SnubWay: Advanced Mains Noise Filter for Superior Audio
Discover the Vera-Fi Audio SnubWay, an advanced parallel mains noise filter designed to eliminate high-frequency noise and pollution from your home's AC power, improving audio system performance. Learn about its technology and where to purchase.