ThermoPro TP63B Wireless Indoor/Outdoor Humidity & Temperature Monitor Instruction Manual

Introduction

Congratulations on your purchase of the wireless indoor/outdoor humidity and temperature monitor. You will now be able to know the outdoor/indoor temperature and humidity while sitting inside.

Components

• 1 x Base Station Unit (Receiver)
• 1 x Remote Sensor (Transmitter)
• 4 x AAA Batteries
• 1 x User Manual

Indoor Base Station (Receiver) Features

Diagram showing the front and side view of the Indoor Base Station with labeled components: 01 Large LCD Display, 02 Remote Low Battery Icon, 03 Outdoor Temperature, 04 Base Station Low Battery Icon, 05 Indoor Temperature, 06 Outdoor Humidity, 07 Indoor Humidity, 08 Backlight Touch Button, 09 Wall Mount, 10 Magnet, 11 Stand, 12 Battery Compartment, 13 CHANNEL SYNC, 14 °F/°C ALL-TIME/24, 15 MAX/MIN CLEAR.

• 01 Large LCD Display: Displays the current outdoor humidity/temperature and indoor humidity/temperature.
• 02 Remote Low Battery Icon: Indicates low battery on the remote sensor.
• 03 Outdoor Temperature: Displays the outdoor temperature.
• 04 Base Station Low Battery Icon: Indicates low battery on the base station.
• 05 Indoor Temperature: Displays the indoor temperature.
• 06 Outdoor Humidity: Displays the outdoor humidity.
• 07 Indoor Humidity: Displays the indoor humidity.
• 08 Backlight Touch Button: Touch once to turn on/off the backlight.
• 09 Wall Mount: Hole for wall mounting.
• 10 Magnet: For magnetic mounting.
• 11 Stand: For tabletop placement.
• 12 Battery Compartment: Holds 2 x AAA batteries to power the unit.
• 13 CHANNEL SYNC: Button to switch between remote sensors or initiate synchronization.
• 14 °F/°C ALL-TIME/24: Button to switch temperature units (°F/°C) and select data recording interval (ALL TIME/24 hours).
• 15 MAX/MIN CLEAR: Button to display maximum/minimum readings and clear history.

Design: Tabletop, wall-mountable and magnet-mountable design.

Indoor Temperature Range: -4°F~158°F (-20°C~70°C).

Humidity Range: 10%~99%.

Temperature Display Unit: °C and °F selectable.

Temperature Resolution: 0.1°C/°F.

Humidity Resolution: 1%.

Backlight: Blue backlight.

Receiver Buttons

• [Backlight Symbol]: Touch once to turn on/off backlight. If the button is not pressed in 15 seconds, the backlight will automatically turn off.
• [MAX/MIN CLEAR]: Press once to display the maximum or minimum temperature and humidity; Press and hold to clear the history data.
• [°F/°C ALL-TIME/24]: Press to select the temperature display in °C or °F. After pressing the [MAX/MIN CLEAR] button, and the display shows the maximum or minimum temperature and humidity. Touch this button once to set the maximum and minimum data recording time interval between ALL TIME or 24 hours.

Note: Both ALL TIME and 24 hours represent the last time you manually cleared the history data or installed a new battery.

Temperature & Humidity Trend

5. Temperature & Humidity Trend:

• 1. ? indicates the temperature & humidity is in an upward trend.
• 2. ➡️ indicates the temperature & humidity is in a no change trend.
• 3. ? indicates the temperature & humidity is in a downward trend.

Outdoor Remote Sensor (Transmitter) Features

Diagram showing the front, back, and side views of the Outdoor Remote Sensor with labeled components: 1 TX LED, 2 Wall Hanging Hole, 3 TX, 4 Channel 1.2.3, 5 2 x AAA Batteries.

• 1. TX LED: Transmit indicator.
• 2. Wall Hanging Hole: For mounting the sensor.
• 3. TX: Button to manually send temperature/humidity data.
• 4. Channel 1.2.3: Selector for the sensor's channel.
• 5. 2 x AAA Batteries: Power source for the sensor.

1. Battery Compartment: Holds 2 x AAA batteries to power the unit.

2. Design: Rain-proof and wall-mounted design.

Outdoor Temperature Range: -4°F~158°F (-20°C~70°C).

Humidity Range: 10%~99%.

Transmitter Buttons

• CHANNEL Selector (1,2,3): Slide to set Channel 1, 2, or 3.
• TX: Press to send temperature/humidity data to the receiver manually.

Battery Installation & Setup

1. Open the battery compartment of the remote sensor as shown in the figure.
2. Slide the channel selector switch inside the battery compartment to your desired channel. For the first remote, you may select any channel; for additional remotes, select any unused channel.
3. Insert 2 x AAA batteries according to the polarity markings. Replace the battery compartment cover.
4. Open the battery compartment at the back of the base station and insert 2 x AAA batteries according to the polarity markings. Replace the compartment door.
5. Press the [°F/°C ALL-TIME/24] button at the back of the base station to display the temperature in °F or °C.

Note: Do not mix old and new batteries. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries. For maximum performance in normal conditions, we recommend using good quality alkaline batteries. If the battery power is low, there will be a low battery icon ? showing on the base station display.

Synchronize Remote Sensors with the Base Station

Please Note: Each time the batteries (inserted into either the base station or remote sensor) are replaced or the base station/remote sensor loses connection, make sure to follow the below synchronization process to pair and re-connect the base station and remote sensor:

1. Position the remote sensor near the base station.
2. Once the batteries are installed in the base station, the RF signal icon ? (located on the upper left of the base station display) will flash for 3 minutes, indicating that the base station is in synchronization mode; it is waiting for remote sensors to be registered.
3. If 3 minutes have passed after the batteries were installed in the base station and the RF signal icon is no longer flashing, press and hold the [CHANNEL SYNC] button on the back of the base station for 3-4 seconds until the RF signal icon is flashing again to set it back in synchronization mode.
4. Install the batteries in the remote sensor and wait for a moment or just press the TX button inside the remote sensor battery compartment; the remote sensor temperature/humidity will show on the base station display, which indicates the synchronization is complete.
5. If you have additional remote sensors, repeat the above steps to register the remote sensors (up to 3 remote sensors can be registered with one base station).
6. If you have registered more than one sensor, press the [CHANNEL SYNC] button on the base station to select the remote channel you want displayed permanently on the base station. Press [CHANNEL SYNC] button until you observe a circular arrow ? on the base station LCD display under the channel number. The unit will then auto-scroll, changing from channel to channel every 5 seconds. Press [CHANNEL SYNC] button until you observe the circular arrow disappear. The unit will stop cycling.

NOTE: If you have additional remote sensors, when you are synchronizing remote sensors with the base station, the unit will keep changing from channel to channel in the first three minutes, after that you can select any channel you like or auto-scroll mode.

Low Battery Warning

If the battery power (base station or remote sensor) is low, there will be a low battery icon ? showing on the base station display; please replace the batteries with new ones.

Place the Base Station & Remote Sensor

1. The indoor base station (receiver) should always be placed in a well-ventilated indoor area and located away from vents, heating or cooling elements, direct sunlight, windows, doors, or any other openings.
2. The remote sensor (transmitter) can be placed on a flat surface indoors or outdoors. Make sure the sensor is within the wireless distance from the base station and with minimal obstructions. Although the remote sensor is designed to be rain-proof, it still must always be put in a dry place avoiding direct rainfall.
3. The base station and remote sensor can both be wall mounted.

Maximum & Minimum Recorded Temperature & Humidity

1. Press [MAX/MIN CLEAR] button once to display the highest indoor and outdoor temperatures/humidity recorded. MAX is shown on the display.
2. Press [MAX/MIN CLEAR] button again to display the lowest indoor and outdoor temperatures/humidity recorded. MIN is shown on the display.
3. To clear and reset the max/min records, press and hold [MAX/MIN CLEAR] for 3 seconds.
4. When the MAX or MIN records are shown on the LCD display, press the [°F/°C ALL-TIME/24] button once to select the data recording time interval between ALL TIME or 24 hours.

Note: Both ALL TIME and 24 hours represent the time since you last manually cleared the history data or battery installation.

Hints & Tips

If the receiver can't connect to the transmitter, try the following:

• Repeat the synchronization process as described above.
• Move the indoor station or the remote sensor closer together until a connection is confirmed.
• Signals from other electronic devices may cause interference. Place the base station and receiver away from these devices.
• If the base station is attached to a refrigerator or a metal object by magnet, the transmission range may be shorter. Remove the base station from the refrigerator or the metal object or place the base station and remote sensor as close as possible.

Warnings

• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Do not immerse the unit in water.
• Do not remove any screws.
• Do not dispose of this unit in a fire. IT MAY EXPLODE.
• Keep unit away from children. The unit or parts of the unit might be a choking hazard.
• Dispose of the unit legally and recycle when possible.

Specifications

• Transmission Frequency: 915MHz or 868MHz.
• Maximum Transmit Power: 8mW.
• Transmission range: Up to 500 feet in open area. (range maybe shorter based on interference present).
• Indoor Temperature Range: -4°F~158°F (-20°C~70°C).
• Outdoor Temperature Range: -31°F~158°F (-35°C~70°C).
• Humidity Range: 10%~99%.
• Temperature Tolerance: ±2.0°F (±1.1°C).
• Humidity Tolerance: ±2% from 30% to 80%; ±3% below 30% and above 80%.
• Power: 2 x AAA 1.5V batteries for base unit and 2 x AAA 1.5V batteries for remote sensor.

Purchasing Additional Remote Sensors

The model number of the remote sensor for this unit is TX-2B/2C. Additional sensors may be ordered directly from Amazon or ThermoPro by contacting our customer service listed below.

FCC Statement of Compliance

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Hereby, the manufacturer declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://buythermopro.com/eu-declaration-of-conformity/

Disposal

Meaning of the "Dustbin” Symbol ?️:

• Protect our environment: do not dispose of electrical equipment in the domestic waste.
• Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
• This helps avoid the potential effects of incorrect disposal on the environment and human health.
• This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.
• Information concerning where the equipment can be disposed of can be obtained from your local authority.

CAUTION: Batteries/rechargeable batteries must not be disposed of with household waste! ⚠️

• The batteries must be removed from the appliance.
• Take spent batteries to the appropriate collection point or to a dealer.
• Your town or local authority can provide information about public collection points.

This symbol ⚠️ can be found on batteries/rechargeable batteries which contain hazardous:

• Pb = contains lead
• Cd = contains cadmium
• Hg = contains mercury
• Li = contains lithium

Limited One-Year Warranty

ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Customer Service

Telephone: 1-877-515-7797 (USA & Canada)

49-215-493-19011 (DE)

44-808-164-1683 (UK)

61-180-057-7492 (AU)

Email: service@buythermopro.com

Mon-Fri: 8:00 AM - 8:00 PM (EST)