ThermoPro Indoor Humidity and Temperature Monitor Instruction Manual
Introduction
Congratulations on your purchase of our indoor temperature/humidity monitor. You can now monitor indoor temperature and humidity to Live Like a Pro!
Components
- 1 x Indoor Thermometer/Hygrometer
- 2 x AAA Batteries
- 1 x User Manual
Features
The ThermoPro monitor features a large LCD display, providing clear readings of current conditions and historical data. It is designed for versatile placement with tabletop stand, wall-hanging hole, and magnetic backing.
Device Description
The device features a large LCD display showing temperature, humidity, and comfort level. It has three touch buttons on the front. The back of the device includes a stand, a wall hanging hole, a magnet for mounting, and a battery compartment.
Key Features:
- Display: Shows current humidity and temperature, along with maximum and minimum recorded values from the last reset or the past 24 hours.
- Power Supply: 2 x AAA 1.5V batteries.
- Temperature Range: -58°F ~ 158°F (-50°C ~ 70°C).
- Humidity Range: 10% ~ 99%.
- Temperature Display Unit: Selectable between °C and °F.
- Temperature Resolution: 0.1°C/°F.
- Humidity Resolution: 1%.
- Backlight Function: ? Press the light button to turn the backlight on/off. It will automatically turn off after 15 seconds if no button is pressed.
- Refresh Rate: 10 seconds.
- Comfort Level: Indicates the comfort level based on humidity: DRY (below 30% humidity), COMFORT (30%-60% humidity), WET (above 60% humidity).
- Design: Totally wireless, suitable for tabletop, magnet-mounting, and wall-mounting.
- Low Battery Indication: Replace batteries promptly when the low battery indicator is displayed.
Touch Buttons
- °C/°F: Touch once to change the temperature display unit between Celsius (°C) and Fahrenheit (°F).
- ? (Backlight): Touch once to turn the backlight on or off.
- ALL TIME/24 HRS: Touch to display the maximum and minimum temperature and humidity recorded since the last reset (ALL TIME) or within the past 24 hours (24 HRS). In 24 HRS mode, values reset automatically every 24 hours. Touch and hold this button for 3 seconds to reset/clear all recorded maximum and minimum temperature and humidity data.
Temperature & Humidity Trend
- ⬆️: Indicates the temperature & humidity is in an increasing trend.
- ➡️: Indicates the temperature & humidity is in a no change trend.
- ⬇️: Indicates the temperature & humidity is in a decreasing trend.
Before First Use
- Insert or Replace Battery: Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated.
- Water Warning: Do not immerse the product body in water.
- The humidity and temperature monitor is now ready to use.
Care of Your Humidity/Temperature Monitor
- Do not expose the device to extreme high or low temperatures, as this can damage electronic parts and plastics.
- Remove batteries if the appliance is stored for more than four months.
General Safety Warnings
- ⚠️ DANGER! This device contains electronic components powered by batteries. Do not allow children to handle the device unsupervised. Use the device only as described in this manual to avoid the risk of electric shock. Children should only use the device under adult supervision. Keep packaging materials (plastic bags, rubber bands) out of reach of children, as they pose a choking hazard.
- ⚠️ DANGER! Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into fire. Excessive heat or improper handling can trigger short-circuits, fires, or explosions!
- ❗ NOTE! Do not disassemble the device. In case of a defect, please contact your dealer. The dealer will contact the Service Centre for repair. Always replace weak or empty batteries with a new, complete set of batteries of the same capacity. Do not use batteries from different brands or with different capacities. Batteries should be removed from the appliance if it is not intended for use for a long time.
Notes on Cleaning
- Before cleaning, disconnect the device from power (remove batteries).
- Clean the exterior of the device with a dry cloth only. Do not use cleaning fluid to avoid damaging the electronics.
Declaration of Conformity
ThermoPro declares that this product complies with the basic requirements and applicable regulations of the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://buythermopro.com/eu-declaration-of-conformity/
Disposal
Meaning of the "Dustbin" Symbol ?️:
- Protect our environment: do not dispose of electrical equipment in domestic waste.
- Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
- This helps avoid potential negative effects on the environment and human health caused by incorrect disposal.
- This contributes to the recycling and reuse of electrical and electronic equipment.
- Information on disposal points can be obtained from your local authority.
❗ ATTENTION: Do not dispose of batteries/rechargeable batteries with household waste!
- Remove batteries from the appliance.
- Return used batteries to the appropriate collection point or retailer.
- Your local authority can provide information on public collection points.
This symbol can be found on batteries/rechargeable batteries containing hazardous substances:
- Pb = contains lead
- Cd = contains cadmium
- Hg = contains mercury
- Li = contains lithium
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase. If repairs or servicing are required during the warranty period, contact Customer Service for instructions on how to pack and ship the product to ThermoPro. This warranty provides specific legal rights, and you may also have other rights that vary from state to state.
Customer Service
- Call or Text: 1-877-515-7797 (USA & Canada only), 33-975-129-576 (France)
- Email: service@buythermopro.com
- Hours: Weekdays 8:00 AM - 8:00 PM EST, 1:00 PM - 12:00 AM CET (France)
FAQ
1. About Accuracy:
Our hygrometer offers high accuracy for its price range. Laboratory-grade devices offering ±1% accuracy cost over $1000. Compared to competitors, our device is accurate to within ±3%, while others are around ±5%. For best results, test your device by comparing it with another identical unit; readings within ±6% indicate accuracy.
2. About Humidity Range:
While our hygrometer offers excellent accuracy for its price, in certain conditions, such as humidity below 10%, the device will display 10%. For example, if the actual humidity is 5%, the device will show 10%. Only expensive laboratory equipment can measure humidity below 10%. No other device on the market, even high-end ones, can measure humidity below 5%.
