ATEN VE849 Multicast HDMI Wireless Extender
Model: VE849 | 1080p@30m
Product Overview
The ATEN VE849 Multicast HDMI Wireless Extender allows you to wirelessly extend your HDMI display up to 30 meters (98 feet) from the HDMI source to up to four separate receivers. It supports crystal clear image quality for Full HD 1080p streaming, 5.1 channel Dolby digital audio, and 3D technology. The integrated IR remote control enables switching between HDMI source devices remotely from the receiver side, allowing simultaneous viewing on one local and four wirelessly connected HDTVs.
The VE849 system, consisting of a wireless HDMI transmitter (VE849T) and receiver (VE849R) sold separately, consolidates your HDMI devices. It is ideal for various applications:
- Wireless 2-port HDMI Switch: Connect remote devices like Blu-ray players and media players for a wireless home cinema setup.
- Meeting Rooms: Share presentations and video conferences wirelessly to up to four different locations up to 30m away.
- Digital Signage: Broadcast advertisements or promotional videos wirelessly across showrooms, boutiques, or car dealerships.
*Note: Transmission distance may vary depending on the actual environment. Solid objects such as steel, concrete, or brick can cause interference and shorten the transmission distance.
Key Features
- Connect 2 HDMI inputs to 5 HDMI outputs (1 local + 4 remote) via wireless extension.
- Wirelessly extend HDMI displays up to 30m from the HDMI source.
- Transmit wireless video content from Blu-ray players, media players, or other HDMI devices.
- Multicast signal: 1 transmitter streams HDMI to 4 receivers simultaneously.
- Supports Dynamic Frequency Selection (DFS) for reduced Wi-Fi interference and improved stability.
- Wireless 3D support.
- Wireless Full HD (1080p) and 5.1 channel Dolby with AC3 and DTS digital audio.
- Superior video quality: Supports 480p, 720p, 1080i, and 1080p (24/30/60fps).
- Keeps home theater electronic devices discreetly out-of-sight.
- Built-in IR receiver with IR blaster cable for remote source device control.
- WHDITM Technology for low latency <1ms.
- HDCP compatible.
- No software or driver installation required.
*Note: Transmission distance may vary depending on the actual environment; solid objects such as steel, concrete, or brick may cause interference and shorten the transmission distance.
Specifications
| Specification | VE849R (Receiver) | VE849T (Transmitter) |
|---|---|---|
| Function | Receiver | Transmitter |
| Video Input | N/A | 2 x HDMI Type A Female (Black) |
| Impedance | N/A | 100 Ω |
| Max. Distance | N/A | 3 m |
| Video Output | 1 x HDMI Type A Female (Black) | 1 x HDMI Type A Female (Black) |
| Impedance | 100 Ω | 100 Ω |
| Max. Distance | 3 m | 3 m |
| Video | ||
| Max. Data Rate | 6.75 Gbps (2.25 Gbps Per Lane) | 6.75 Gbps (2.25 Gbps Per Lane) |
| Max. Pixel Clock | 225 MHz | 225 MHz |
| Compliance | HDMI (3D), HDCP Compatible | HDMI (3D), HDCP Compatible |
| Max. Resolutions / Distance | Up to 1080p@30m (Line of Sight) * | Up to 1080p@30m (Line of Sight) * |
| Audio | ||
| Input | N/A | 2 x HDMI Type A Female (Black) |
| Output | 1 x HDMI Type A Female (Black) | 1 x HDMI Type A Female (Black) |
| Control | ||
| IR | 1 x 2.5mm Mini Stereo Jack Female (Black) | 1 x 2.5mm Mini Stereo Jack Female (Black) |
| Connectors | ||
| Power | 1 x DC Jack (Mini USB) | 1 x DC Jack |
| Power Consumption | DC5V:7.5W:32BTU | DC5V:10W:42BTU |
| Note: The measurement in Watts indicates the typical power consumption of the device with no external loading. The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. | Note: The measurement in Watts indicates the typical power consumption of the device with no external loading. The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. | |
| Environmental | ||
| Operating Temperature | 0 - 40°C | 0 - 40°C |
| Storage Temperature | -20 - 60°C | -20 - 60°C |
| Humidity | 0 - 80% RH, Non-Condensing | 0 - 80% RH, Non-Condensing |
| Physical Properties | ||
| Housing | Plastic | Plastic |
| Weight | 0.13 kg (0.29 lb) | 0.21 kg (0.46 lb) |
| Dimensions (L x W x H) | 9.50 x 9.50 x 3.50 cm (3.74 x 3.74 x 1.38 in.) | 18.00 x 9.50 x 3.00 cm (7.09 x 3.74 x 1.18 in.) |
| Carton Lot | 5pcs | 5 pcs |
Note: For some rack mount products, physical dimensions (WxDxH) are expressed using a LxWxH format.
Diagram Description
The diagram illustrates a typical setup for the ATEN VE849 Multicast HDMI Wireless Extender. A Blu-ray player and a video game console are connected to the VE849T transmitter. The transmitter wirelessly sends the HDMI signal to four VE849R receivers. Each receiver is connected to a separate HDTV, labeled as Place 1, Place 2, Place 3, and Place 4, demonstrating the multicast capability of extending one source to multiple displays simultaneously.
