VEVOR Paste Liquid Filling Machine User Manual

Product Models

This manual covers the following Vevor Paste Liquid Filling Machine models:

• SYD-580-V1, SYD-580-V2, SYD-580-V3
• SY-650-V1, SY-650-V2, SY-650-V3
• SYD-650-V1, SYD-650-V2, SYD-650-V3

VEVOR is committed to providing tools at competitive prices. The expressions "Save Half" or "Half Price" represent an estimate of savings compared to major top brands and may not apply to all products. Please verify savings when placing an order.

Need Help? Contact Us!

For product questions or technical support, please visit www.vevor.com/support.

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret its user manual. Product appearance is subject to the received product. VEVOR will not provide prior notice for technology or software updates.

WARNING

1. Read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
2. Failure to follow safety rules may result in serious personal injury.

General Safety Rules

Important Reminder

• Read the product manual carefully and ensure understanding of all safety warnings and usage precautions.
• Do not use the product for non-designated purposes.
• Comply with relevant age restrictions and warnings.
• If any abnormalities occur, stop using the product immediately and contact the after-sales service center.

Environmental Requirements for Use

• Use in a dry, well-ventilated environment, avoiding extreme conditions (water, high temperature, high humidity, extreme cold).
• Avoid direct sunlight or fire sources.
• Ensure a stable usage environment and prevent the product from being hit or dropped.

Safety Operation Guidelines

• Use a suitable power supply and voltage; do not use damaged power cords or plugs.
• Do not short-circuit or connect mismatched devices.
• Remove foreign objects from the product surface before use.
• Take breaks during prolonged use to avoid fatigue.
• Do not apply external force to the battery.

Maintenance and Upkeep

• Regularly maintain and clean the product. Disconnect power before cleaning and wipe with a dry cloth. Avoid corrosive substances like alcohol or acid/alkali solutions.
• Disconnect power when the product is not in use for extended periods.
• Do not disassemble or replace components yourself. Contact the after-sales service center for malfunctions.

Emergency Handling Measures

• Stop using the product immediately in case of abnormalities (overheating, smoking, abnormal sound). Cut off power and contact the after-sales service center.
• In emergencies that may harm personal safety, call emergency rescue services promptly.

Disclaimers

VEVOR prioritizes product safety and quality but is not responsible for safety accidents caused by improper use or operation.

Model and Parameters

Structure Diagram

SYD-580-V1, SYD-580-V2, SYD-580-V3

The main unit features a control panel with displays and buttons, a filling nozzle assembly with an adjustable bracket, and hoses for liquid intake and outlet. A pedal switch is used for operation.

Key components:

• 1. Speed Knob
• 2. Switch
• 3. Control Panel
• 4. Outlet Hose and Filling Nozzle (Double)
• 5. Built-up Bracket
• 6. Power Switch and AC Power Socket
• 7. Inlet Hose and Filter (Double)
• 8. Pedal Switch
• 9. Outlet (Double)
• 10. Inlet (Double)

SY-650-V1, SY-650-V2, SY-650-V3

This model includes a control panel, a filling nozzle assembly, a peristaltic pump, and hoses. It is operated via a pedal switch.

Key components:

• 1. Speed Setting
• 2. Start Button
• 3. Power Switch and AC Power Socket
• 4. Control Panel
• 5. Pedal Switch
• 6. Built-up Bracket
• 7. Outlet Hose and Filling Nozzle
• 8. Peristaltic Pump
• 9. Inlet Hose and Filter

SYD-650-V1, SYD-650-V2, SYD-650-V3

Similar to the SY-650 series, this model features a control panel, double filling nozzles, a peristaltic pump, and is operated with a pedal switch.

Key components:

• 1. Speed Setting
• 2. Control Panel
• 3. Outlet Hose and Filling Nozzle (Double)
• 4. Built-up Bracket
• 5. Power Switch and AC Power Socket
• 6. Pedal Switch
• 7. Peristaltic Pump
• 8. Inlet Hose and Filter

Components

Operating Instructions

1. Assemble the bracket: Insert a rod into the cross connector, then insert another rod into the cross connector to lock it. Install the assembled rods onto the T clamp.
2. Attach fixed blocks to the rods and secure them with rubber head screws. Note: SY-650 models use one fixed block, while SYD-580 and SYD-650 models use two.
3. Insert the filling nozzles into the fixed blocks. Note: SYD-580 and SYD-650 models have double filling nozzles; SY-650 models have single filling nozzles.
4. Connect the pedal switch to the designated port.
5. Connect the power cord to the power socket.
6. Product assembly is complete. The built-up bracket and filling nozzles can be adjusted as needed.
7. Cleaning: After use, clean the machine by repeatedly drawing a mild cleaning solution, followed by clean water.

Control Panel Operation

The control panel allows for setting filling parameters and operating the machine.

Button Function Introduction:

• 1. Set/Exit Button: Press to enter/exit setting mode for filling/waiting time.
• 2. Move Button: Navigates the cursor left or right.
• 3. Add/Unit Button: Adjusts setting numbers (0-9) or changes time unit format.
• 4. Reset Button: Resets the filling count to zero.
• 5. Inching Button: Purges air from the tube or empties the tube for cleaning.
• 6. Setting Button: Roughly sets the filling volume.
• Manual Button: Initiates a single filling cycle when pressed or when the foot pedal is activated.
• Auto Button: Enables automatic, continuous filling based on set times. The "auto" indicator light shows when this mode is active.
• Add/Mode: Displays the working mode.
• Increase/Decrease Button: Adjusts filling speed from 0-99 (higher number means faster speed).

Operation Example (Setting Filling Time):

Ensure the machine is in standby/stop state (press "Auto" key if it's running in automatic mode; the "auto" indicator will turn off).

1. Set Filling and Waiting Time: Use the "Set/Exit" button to select the time parameter, "Move" button to navigate numbers, and "Add/Unit" button to adjust values. The "Add/Unit" button also changes the time unit format (e.g., 01.00 = 1 second, 00.10 = 0.1 second, 10.00 = 10 seconds).
2. Set Filling Speed: Adjust the filling speed using the "Increase/Decrease" buttons.
3. Set Count: The count usually does not need adjustment, but can be reset to "0" using the "Reset" button while in standby.
4. Mode Selection: Choose between Automatic or Manual mode by pressing the respective buttons.

Automatic Mode: The machine fills cyclically based on the set filling and waiting times until stopped. Press the "Auto" button to start filling.

Manual Mode: The machine fills only when the "Manual" button is pressed or the foot pedal is activated. Each press results in one filling cycle.

Maintenance

• Clean the machine with clean water after each use to prolong pump life.
• Clean the product and filter promptly after each use.
• When not in use, empty the liquid and store the machine in a ventilated, dry place.
• Regularly replace consumable parts such as the hose, filter, and filling nozzle.

Troubleshooting

WEEE Symbol: This product is subject to European Directive 2012/19/EC. The crossed-out wheelie bin symbol indicates that the product requires separate collection for electrical and electronic devices. Do not discard with normal household waste; take it to an authorized collection point for recycling.

Company Information

• Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shishanghai
• Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
• Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• EC REP: SHUNSHUN GmbH, Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
• UK REP: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
• Made In China