VEVOR Vacuum Packing Machine

Introduction

This manual provides essential information for the operation and maintenance of the VEVOR Vacuum Packing Machine. VEVOR is committed to offering competitive pricing. Claims like "Save Half" or "Half Price" represent an estimate of savings compared to major brands and may not apply to all product categories. Customers are advised to verify savings carefully.

This document is the original instruction. Please read all instructions carefully before operating the machine. VEVOR reserves the right to interpret this user manual. Product appearance is subject to the received item. Updates to technology or software may occur without prior notice.

Safety Precautions

⚠️ WARNING: Read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow safety rules may result in serious personal injury.

General Safety Rules

• Read the entire operating instructions before first use.
• Warranty is void if damage results from non-compliance with instructions. Liability for consequential damage is excluded.
• VEVOR assumes no liability for damage to property or personal injury caused by improper use or failure to observe safety instructions.
• Unauthorized conversion, modification, or disassembly is inadmissible due to safety and approval reasons (CE).
• The product is not a toy and must be kept out of reach of children. Exercise particular care if children are present.
• Use only in dry, indoor locations. Do not expose to moisture, dampness, or similarly damp areas, as there is a risk of fatal electric shock.
• Do not expose the product or accessories to extreme high or low temperatures.
• Do not leave packing materials unattended, as they can become dangerous playing material for children.
• Avoid dropping, falling, or subjecting the device to excessive pressure or tensile forces, which could destroy or limit its function.
• Never position the device near combustible or easily inflammable materials.
• Always ensure the object is placed in the center of the rotary table within the housing.

SAVE THESE INSTRUCTIONS

Product Description and Applications

This vacuum packing machine uses plastic film or plastic aluminum film to vacuum package a wide range of items, including:

• Paste foods
• Fruits
• Sauce vegetables
• Chemicals
• Pharmaceuticals
• Electronic components
• Precision instruments
• Rare metals
• Other items

Products packaged under vacuum are less prone to oxidation and mold. This machine is especially suitable for industries such as tea, food, and medicine.

If safe operation is no longer possible (e.g., visible damage, machine malfunction, after prolonged storage in unfavorable conditions, or after heavy stress during transportation), disconnect the device immediately and secure it against inadvertent operation.

Model and Parameters

Structure Diagram

The vacuum packing machine consists of the following main components:

• 1. Vacuum cover: The transparent lid that seals the chamber.
• 2. Silicone strip: Provides a seal between the cover and the base.
• 3. Vacuum sealing bar: Where the bag is placed for sealing.
• 4. Sealing heating strip: Heats up to create the seal.
• 5. Bag pressing rod: Helps flatten the bag for a better seal.
• 6. Base plate: The main body of the machine.
• 7. Indicator: Lights indicating machine status.
• 8. Vacuum gauge: Displays the vacuum pressure.
• 9. Circuit board: Houses the electronic controls.
• 10. Heating transformer: Supplies power to the heating elements.
• 11. Vacuum pump solenoid valve: Controls the vacuum pump operation.
• 12. Power switch: Turns the machine on/off.
• 13. Power plug: Connects the machine to the power source.
• 14. Vacuum pump: Creates the vacuum inside the chamber.
• 15. Oil injection port: For adding vacuum pump oil.
• 16. Oil level observation window: To check the oil level.
• 17. Oil drain screw: For draining vacuum pump oil.

Parts List

Operating Instructions

Initial Setup

1. Unscrew the rear cover plate.
2. Add vacuum pump oil: Locate the oil injection port. Add vacuum pump oil until the level is between 1/2 and 3/4 of the observation hole. Do not overfill. Screw back the oil mist filter and close the back cover.

Panel Usage Instructions

1. Step 1: Connect the machine to the appropriate power supply.
2. Step 2: Turn on the AIR SWITCH.
3. Step 3: VACUUM TIME: In the standby state, use the DECREASE or INCREASE buttons to set the desired vacuum time. For general items, 30-40 seconds is recommended.
4. Step 4: SEALING TIME: Use the DECREASE or INCREASE buttons to set the sealing time. For general items, 2-2.2 seconds is recommended. Adjust based on the thickness of the vacuum bag. It is crucial not to set the sealing time too long, as this can burn out the sealing heating strip.
5. Step 5: COOLING TIME: In the standby state, use the DECREASE or INCREASE buttons to set the cooling time. For general items, 3-5 seconds is recommended.

Operation

4. Place your product inside the vacuum bag. Ensure the seal area of the bag is positioned correctly on the heating strip. Press the bag strip to flatten the product.
5. Hold the front of the cover with both hands and press down firmly. The machine will start working. Once the vacuum meter pointer begins to move, you can release your hands. The machine will automatically complete the packaging process.
6. MARINATE Function: To use the marinate function, click the "MARINATE" button on the control panel. The marinate indicator light will illuminate. Adjust the pumping time as needed for marinate work. In this mode, the machine operates in a vacuum-only state without sealing.

Maintenance (Oil Change)

7. When the machine requires an oil change or has not been used for a long time, loosen the screw located under the oil window and drain the vacuum pump oil. It is recommended to replace the vacuum pump oil after approximately 800 hours of continuous operation.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your vacuum packing machine.

• After each use, clean the machine's surface and remove any residual materials from inside the machine.
• When storing the machine, keep it in a clean, dry, and safe location away from children.
• All maintenance, service, and repairs not explicitly covered in this manual should only be performed by qualified service technicians.

Replace the High Temperature Cloth (Teflon Cloth)

1. Remove the screws on both sides of the tray, then lift out the entire tray.
2. Remove the upper screws securing the cloth.
3. Carefully remove the old high-temperature cloth.
4. Apply the new high-temperature cloth, ensuring it is positioned correctly.
5. Reinstall the original screws to secure the new cloth and tray.
6. Installation is now complete.

Replace the Chamber Sealing Strip

1. Gently remove the old chamber sealing strip from its groove.
2. Install a new chamber sealing strip, ensuring it fits snugly into the groove.
3. Installation is now complete.

Troubleshooting and Solutions

Correct Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi, Shanghai

European Representative (EC REP)

Company: SHUNSHUN GmbH.

Address: Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany

Tel: +49 1727041930

Email: euvertreter@gmail.com

United Kingdom Representative (UK REP)

Company: Pooledas Group Ltd.

Address: Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

Tel: 01772418127

Email: pooledas123@gmail.com

Imported to Australia

Company: SIHAO PTY LTD.

Address: 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported to USA

Company: Sanven Technology Ltd.

Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Made In China