Babyletto M4299 Junior Bed Conversion Kit

Welcome & Introduction

Welcome to Babyletto! This kit is designed with the goal of helping you create a beautiful and functional nursery. We aim to help you create the coolest nursery on the block and hopefully, get you some restful sleep! Share your style with us at #babyletto and join our community of modern parents.

Product Compatibility

This product is designed for use with Babyletto Cribs M4201 (Hudson Crib) and M5801 (Scoot Crib). The M4201 (Hudson Crib) is shown as a sample in the diagrams.

Parts Identification

The conversion kit includes the following main components:

• Left side panel (A-1)
• Right side panel (B-1)
• Back panel (C)

Diagrams on page 6 illustrate these parts.

Hardware Identification

The following hardware is included with the kit:

Diagrams on page 7 show the actual sizes and types of hardware.

Assembly Instructions

Follow these steps carefully. Ensure all hardware is tightened securely.

Step 1: Base Attachment

Attach the side panels to the base structure using H2 screws (x8) and H6 caps (x8). The diagram shows screws being inserted into pre-drilled holes on the base and side panels.

Step 2: Connecting Side Panels to Back Panel

Connect the side panels (A-1, B-1) to the back panel (C) using H1 screws (x12) and H6 caps (x12). The diagram illustrates how the back panel connects to the side panels.

Step 3: Attaching Side Panels to Base Structure

Use the same base assembly and hardware from the original crib assembly. Attach panels A-1 and B-1 to the base structure using H2 screws (x4), H4 connectors (x4), and H6 caps (x4). The diagram shows the connection points and hardware usage.

Step 4: Securing Back Panel

Use the same hardware from the crib assembly. Attach panel C (back panel) between panels A-1 and B-1 using H1 screws (x4) and H6 caps (x4). The diagram shows the back panel fitting between the side panels.

Step 5: Mattress Support Installation

Use the same mattress support and hardware from the crib assembly. Attach the mattress support using H3 screws (x4). The diagram shows the mattress support being secured to the side panels.

Step 6: Toddler Bed Rail Attachment

Use the same toddler bed rail and hardware from the crib assembly. Attach the rail using H1 screws (x4) and H6 caps (x4). The diagram shows the rail being attached to the side panels.

Important Safety Warnings

WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death.

Before Assembly

• Read all instructions before assembling the crib. Keep instructions for future use.
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges before and after assembly, and frequently during use.
• Securely tighten loose bolts and other fasteners.
• DO NOT use the crib if any parts are missing, damaged, or broken.
• For replacement parts or instruction manuals, contact Million Dollar Baby Co.

Suffocation Hazard

• Never use plastic shipping bags or other plastic film as mattress covers, as they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

Strangulation Hazard

• Strings can cause strangulation! Do not place items with a string around a child's neck, such as hood strings or pacifier cords.
• Do not suspend strings over a crib or attach strings to toys.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of their body or clothing on loose fasteners.
• DO NOT place the crib near a window where cords from blinds or drapes may strangle a child.

Fall Hazard

• When a child is able to pull to a standing position, set the mattress to the lowest position.
• Remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
• Stop using the crib when the child begins to climb out or reaches the height of 35 in. (89 cm).

After Assembly

• DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children's products.
• Follow warnings on all products in a crib.

Mattress Requirements (CAUTION)

Any mattress used in this crib must be at least 51 5/8 inches (131 cm) long by 27 1/4 inches (69 cm) wide, and have a thickness not exceeding 6 inches (15 cm).

Intended User: Minimum age must be at least 15 months old, and maximum weight must not exceed 50 lbs (22.7 kg).

Storage

Because materials respond to temperature and humidity, it is important to store furniture in controlled environments. Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers. Any changes such as extreme heat or cold, dampness, or dryness, may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect the coloring of materials over time.

Care and Cleaning

To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-toxic foaming fabric cleaner or leather cleaner where appropriate. Touch-up kits are available for purchase.

Contact us at: (323) 282-5163 or INFO@MDBMAIL.COM

Product Registration

Registering your product is simple. You can do so at: BABYLETTO.COM/REGISTRATIONS

Part Replacement

If you would like to order replacement or missing parts, please visit us at: BABYLETTO.COM/PARTS

Or you can contact us by mail at: 8700 REX RD. PICO RIVERA, CA 90660

One Year Limited Warranty

Oops! Did we make a mistake? No worries, your Babyletto product is covered under warranty for one year after the date of purchase. For more details on our warranty policy, please visit: BABYLETTO.COM/WARRANTY