Babyletto Lolly Cot Assembly Instructions

Item# 9001

Introduction

Thank you for purchasing this nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.designkids.com.au.

For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Our pieces are made from natural woods. Due to the nature of wood, some variation in color, grain, or texture is to be expected.

We hope you and your growing family enjoy our product.

With thanks,
Ubabub International Pty Ltd

Requirements:

Two people needed for assembly. ?
Tools needed (not included): Phillips screwdriver ?

Parts

Parts List (Not to Scale):

A. Front / Back Panel (2)
B-5. Left Side Panel
B-6. Right Side Panel
C-1. Base Frame
D. Left Legs (2)
E. Right Legs (2)
F. Foot (4)
G-3. Mattress Support U9001
I. Toddler Bed Conversion Kit

Hardware

Hardware (Bolts in Actual Size):

H1. 5.7 cm Allen Head Bolt (16)
H2. 4.4 cm Allen Head Bolt (4)
H4. 3.8 cm Round Head Bolt (12)
H5. Wood Dowel (16)
H7. Lock Washer (36)
H12. Allen wrench
H13. Nut (4)
H14. 2.0 cm Allen Head Bolt with cap (4)
H15. 3.8 cm Allen Head Bolt (4)

Assembly Instructions

Step 1

Attach the Feet (F) to the Base Frame (C-1) using Wood Dowels (H5). Insert 4 dowels per foot. Repeat for all four feet. (X4)

Diagram Description: Shows the Base Frame (C-1) with four feet (F) being attached using Wood Dowels (H5). An inset shows a close-up of a foot being inserted into the frame with dowels.

Step 2

Attach the Base Frame (C-1) to the side panels using Round Head Bolts (H4) and Lock Washers (H7). Ensure not to overtighten. (X4)

Diagram Description: Shows the Base Frame (C-1) being attached to what appears to be the side panels of the cot. Round Head Bolts (H4) and Lock Washers (H7) are used. An inset shows a close-up of the connection.

Step 3

Attach the Front/Back Panel (A) to the Base Frame (C-1) using Wood Dowels (H5). (X8)

Diagram Description: Shows the Front/Back Panel (A) being attached to the Base Frame (C-1) using Wood Dowels (H5).

Step 4

Attach the Front/Back Panel (A) to the Base Frame (C-1) using Round Head Bolts (H4) and Lock Washers (H7). Ensure not to overtighten. (X2)

Diagram Description: Shows the Front/Back Panel (A) being attached to the Base Frame (C-1) using Round Head Bolts (H4) and Lock Washers (H7).

Step 5

Attach the Left Side Panel (B-5) and Right Side Panel (B-6) to the assembled frame using Allen Head Bolts (H1) and Lock Washers (H7). Ensure not to overtighten. (X8)

Diagram Description: Shows the Left Side Panel (B-5) and Right Side Panel (B-6) being attached to the cot structure using Allen Head Bolts (H1) and Lock Washers (H7). An inset shows a close-up of the connection.

Step 6

Attach the side panels (B-5, B-6) to the Base Frame (C-1) and Front/Back Panel (A) using Round Head Bolts (H4) and Lock Washers (H7). Ensure not to overtighten. (X4)

Diagram Description: Shows the side panels being attached to the base and front/back panels using Round Head Bolts (H4) and Lock Washers (H7).

Step 7

Secure the side panels to the base frame using Allen Head Bolts (H1) and Lock Washers (H7). Ensure not to overtighten. (X4)

Diagram Description: Shows Allen Head Bolts (H1) and Lock Washers (H7) being used to secure the side panels to the base frame.

Step 8

Install the safety bolts and caps (H14) into the accessible holes. Tighten with the Allen wrench (H12). (X4)

Diagram Description: Shows the installation of safety bolts and caps (H14) into the cot frame, secured with an Allen wrench (H12).

Step 9

Install the mattress support (G-3) at the desired height. Use bolts and caps (H14) to secure the mattress support, tightening with the Allen wrench (H12). Ensure the mattress support is level. (X4)

Diagram Description: Shows the mattress support (G-3) being installed at either a higher or lower position and secured with bolts and caps (H14). An inset shows the leveling of the support.

Step 10

Attach the Toddler Bed Conversion Kit components (if applicable) using the provided hardware. Ensure not to overtighten. (X2)

Diagram Description: Shows the attachment of the Toddler Bed Conversion Kit.

Care and Safety

General Warnings:

Failure to follow warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling the cot. Keep the manual for future use.
Parents should ensure a safe environment by checking that every component is properly and securely in place.
Do not use this cot if you cannot follow the instructions exactly.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
To reduce the risk of SIDS, place infants on their backs to sleep, unless advised otherwise by a physician.
Strangulation Hazard: Strings can cause strangulation. Do not place items with strings around a child's neck. Do not suspend strings over a cot or attach strings to toys. Tighten all fasteners to prevent children from trapping body parts or clothing.
Do not place the cot near windows with cords from blinds or drapes.
Fall Hazard: When a child can pull to a standing position, set the mattress to the lowest position and remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
Do not use this cot if the child can climb out unaided or is taller than 35 in. (89cm).
Check for damaged hardware, loose joints, loose bolts, missing parts, or sharp edges before and after assembly, and frequently during use. Securely tighten loose bolts and fasteners. DO NOT use if parts are missing, damaged, or broken. DO NOT substitute parts. Contact Ubabub International Pty Ltd for replacement parts.
Do not use a water mattress.
Replace teething rails if damaged, cracked, or loose.
If refinishing, use a non-toxic finish specified for children's products.
Never use plastic shipping bags or plastic films as mattress covers, as they can cause suffocation.
Infants can suffocate in gaps between cot sides with a mattress that is too small.
Do not remove any wood screws in the normal disassembly of the cot.
Ensure sides are properly latched or locked when the cot is occupied.
Place cot at a reasonable distance from curtains, blinds, heaters, and power points.
Keep medication, string, elastic, small toys, or small items out of reach.

Mattress Requirements:

Mattress must be at least 27 1/4 inches (69cm) wide by 51 5/8 inches (131cm) long.
Mattress thickness should not exceed 6 inches (15cm).
Gaps between the mattress and the cot sides should not exceed 40 mm when the mattress is pushed to one side, and 20mm when centered.
The cot depth should be greater than 500 mm with the mattress base in the lower position.

Storage:

Store furniture away from heating or air-conditioning vents to adjust to changes in room temperature and humidity.
Avoid prolonged direct exposure to harsh sunlight, which can discolor the finish. Blot up spills immediately.

Care and Cleaning:

Do not scratch or chip the finish.
Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag.
Rinse and dry thoroughly.
If refinishing, use only a non-toxic finish specified for children's products. Refinishing may void the warranty.

Warranty Information

AUSTRALIA - WARRANTY

Ubabub International Pty Ltd warrants that your Lolly Cot will be free from defects for a period of one year from the date of purchase. This warranty applies where the product is completely and correctly assembled and used in accordance with recommendations and instructions. This warranty is in addition to your rights under the Australian Consumer Law.

Ubabub International Pty Ltd will provide a replacement for this product if the Lolly Cot becomes defective within the warranty period. Ubabub International Pty Ltd will bear the reasonable expense of claiming the warranty. This warranty will not apply if the defect results from installation and assembly, normal wear and tear, abuse, negligence, improper use, or alteration to the finish, design, or hardware of the cot.

Australian Consumer Law guarantees apply. You are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

Please retain your receipt as proof of purchase and contact Ubabub International Pty Ltd for assistance with warranty claims.

Business Details:

Business name: Ubabub International Pty Ltd
Business address: PO Box 4129 Ringwood VIC 3134
Phone number: (03) 8838 8006
Email address: info@designkids.com.au

Manufacturer Details:

Manufacturer name: Hsing's Industrial Corp
Manufacturer address: No.186, Chih Kan N.Rd. Tzu Kuan Hsiang, Kaohsiung Hsien, Taiwan 826, ROC.

	Babyletto Hudson Cot Assembly Instructions Assembly instructions for the Babyletto Hudson Cot, including parts list, hardware details, step-by-step assembly guide, and safety information.
	Babyletto M4299 Junior Bed Conversion Kit Assembly Instructions Assembly instructions, safety warnings, and care information for the Babyletto M4299 Junior Bed Conversion Kit, designed to convert Babyletto cribs into toddler beds.
	Babyletto Eero 4-In-1 Convertible Crib Assembly Instructions Step-by-step assembly guide for the Babyletto Eero 4-In-1 Convertible Crib, including parts identification, hardware details, safety warnings, and care instructions.
	Babyletto Hudson 3-in-1 Convertible Crib Assembly and Safety Guide Comprehensive guide for assembling the Babyletto Hudson convertible crib, including parts list, hardware, step-by-step instructions, safety warnings, and care information. Converts to toddler bed and day bed.
	Babyletto Crosby Crib Assembly Instructions Detailed assembly instructions for the Babyletto Crosby 3-in-1 Crib (Model M31801). Includes parts list, hardware guide, and step-by-step assembly.
	Babyletto Lolly M9023 Changing Dresser Assembly Manual Detailed assembly instructions and user guide for the Babyletto Lolly M9023 changing dresser. Includes parts lists, hardware identification, step-by-step assembly, care, and safety information.
	Babyletto Gelato Crib Assembly Instructions Comprehensive guide for assembling the Babyletto Gelato crib, including parts list, hardware details, and step-by-step instructions in English, Spanish, and French.
	Babyletto Crosby M31811 Assembly Instructions Comprehensive assembly instructions for the Babyletto Crosby M31811 open bookcase. Includes parts list, hardware details, step-by-step assembly, and anti-tip kit installation.