XGODY Bluetooth Keyboard User Manual
Indicator Lights and Keys Introduction
The keyboard features several indicator lights and controls:
Indicator Lights/Controls:
- Connect: Button to enter Bluetooth connection mode.
- OFF/ON: Power switch.
- CAPS: Indicator for Capital Lock.
- Charge: Indicator for charging status.
- Power: Indicator for power status.
| Icon/Control | Instruction |
|---|---|
| Connect | Press to enter Bluetooth connection mode; the Bluetooth signal light will flash. |
| OFF/ON | Switch |
| CAPS LED | Lights up when switched to capital letters. |
| BT LED | Flashes when the keyboard is connecting and goes out after connected. |
| Charge LED | Red light when charging, green light when fully charged. |
| Power LED | Flashes 1-2 seconds when the keyboard turns on, then goes out automatically. |
Keyboard Shortcut Function Description
Utilize the Fn key in combination with other keys for various functions:
| Shortcut | Function | Shortcut | Function |
|---|---|---|---|
| ? Desk/Exit | Desk/Exit | ⏪ Previous | Previous |
| ? Searching | Searching | ⏩ Next | Next |
| ?️ Select all | Select all | ▶️⏸️ Pause/Play | Pause/Play |
| ? Copy | Copy | ?+ Volume + | Volume + |
| ? Paste | Paste | ?- Volume- | Volume- |
| ? Lock screen | Lock screen | ? Language switching | Language switching |
| Fn Function key | Function key | ⌨️ Soft keyboard switch | Soft keyboard switch |
| ✂️ Cut | Cut |
Input Switch IOS: Control+Space
Specification
- Frequency: 2.4GHz
- Working Voltage: 3.7V DC
- Working Current: <5mA
- Standby current: 1.0mA
- Sleeping current: <0.25mA
- Working distance: 10 meters
Pairing Instruction
Before using this keyboard, it must be connected with your tablet or other device. Once paired successfully, re-connection in the future is not required.
Please connect the keyboard with your tablet according to the following instructions:
- Turn on the keyboard, select ON. Press the "Connect" button; the blue light blinks.
- To enable Bluetooth on the tablet: Go to Settings > Connected devices, click "Pair new device" to search for devices. Discover the Bluetooth keyboard device named "Bluetooth Keyboard," and click on it. The Bluetooth keyboard will automatically connect. Check "Allow" and click "Pair".
- After a successful Bluetooth connection, the pairing indicator light will go off, and the device will be displayed as "Connected" in the Bluetooth device list.
Note:
- Please connect the keyboard after the wireless connection light of the keyboard is on.
- If the tablet and the keyboard cannot be automatically connected again, it may be due to the keyboard's Bluetooth IP address changing. Please do not operate in the connection history; follow the above steps to search again and then connect.
How to Configure a Physical Keyboard for Machine Operation
- When the machine is successfully connected to the keyboard via Bluetooth, the notification bar will pop up "Configure Physical Keyboard". Please click this message.
- The device will jump to System - Language & Input - Physical Keyboard.
- Click Bluetooth keyboard - SET UP KEYBOARD LAYOUTS - Select the same language as the physical keyboard, such as "German". The setup is successful.
Power Saving Sleep Mode
When there is no activity on the keyboard for 10 minutes, it will automatically enter sleep mode, and all LEDs will turn off. To use it again, simply press any key and wait for about 3 seconds. The keyboard will wake up and automatically reconnect to Bluetooth, allowing normal operation.
Troubleshooting
If your keyboard doesn't work properly:
- Please make sure that your computer Bluetooth function is enabled.
- The keyboard should be within 10 meters of the computer.
- Keyboard built-in battery power is too low, please charge the keyboard.
- If the keyboard is not connected or paired with the tablet computer after successful pairing, or if text input delay or typing errors occur, please follow these steps: delete all Bluetooth devices, close and reopen the computer's Bluetooth option, restart the tablet computer and keyboard, and then re-connect.
Charging
When the battery level is low, the low battery indicator light will continuously blink, indicating that the keyboard needs to be charged.
- Connect the Type-C end of the original USB cable to the Type-C charging port on the keyboard.
- Connect the Type-A end of the USB cable to a 5V1A/2A power adapter (power adapter not included).
- During the charging process, a red light indicates charging, and a green light indicates the battery is fully charged.
Problem Solving
The Bluetooth keyboard cannot connect to the device.
- Check if the Bluetooth indicator light is flashing blue. If the Bluetooth connection indicator light is not flashing, press the Connect key to enter Bluetooth connection mode.
- When you see the Bluetooth indicator light flashing, turn on the Bluetooth on the device and search for the Bluetooth device named "Bluetooth Keyboard." Click to pair and connect.
- If the device has previously been connected to a Bluetooth keyboard, please delete the Bluetooth keyboard from the device's Bluetooth devices and reconnect.
