XGODY Gimbal N6 Pro LED Projector

Attention:

Please read this manual carefully before use and keep it for future reference.

• The projector is non dustproof or waterproof.
• In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
• Please use the original power adapter. The projector should work under specified rated power supply.
• When projector is working, please do not look directly into the lens. The strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
• Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
• Regularly clean projector vents, or dust may cause cooling malfunction.
• Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
• Please handle with care during daily use.
• Please cut off the power if the projector is out of use for long time.
• Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Specification

Packing List:

• Smart Projector x1
• HDMI Cable x1
• Power Cable x1
• Remote Control x1 (Batteries are not included)
• Projector User Manual x1

Structure Description

This manual is for reference only. It is subject to change without prior notice. XGODY reserves the right of final interpretation.

Front View:

• IR Receiver

Rear View:

• HDMI Input
• 3.5mm Stereo Jack
• IR receiver
• USB Input
• ON/OFF
• Power Socket

TIPS: Blurry Images

Click Setting icon on the homepage - Setting - Lens - Autofocus Settings to adjust the image clarity. Press the focus button on remote control to get the best clarity.

Cleaning Method

1. Get the screwdriver ready, unscrew the screws.
2. Clean the projector by the Cotton swab.
3. Reinstall the bottom cover after cleaning.

Remote Control

• Power: [Power Button]
• Input: [Input Source Button]
• Google Assistant: [Google Assistant Button]
• Bluetooth Speaker: [Bluetooth Speaker Button]
• Setting: [Settings Button]
• D-Pad with center select: [Navigation Buttons with OK]
• Back: [Back Button]
• Home: [Home Button]
• Menu: [Menu Button]
• TV Casting: [TV Casting Button]
• VOL+/-: [Volume Up/Down Buttons]
• Focus +/-: [Focus Up/Down Buttons]
• Mute: [Mute Button]
• Netflix: [Netflix Button]
• YouTube: [YouTube Button]
• Disney +: [Disney+ Button]
• Prime Video: [Prime Video Button]

Note: The matching interface of Bluetooth remote control. Press "Voice input" button to bring up the matching guide.

Getting Started

1. Plug the power cable to the projector.
2. Press power button to turn on the projector.

Use the manual focus by pressing the "Focus" button on the remote control.

TIPS: Make sure the projector is horizontal to the projector screen.

Homepage UI

The projector features a user-friendly interface with trending content and app shortcuts.

Network Setting

Click Setting icon on the homepage, Network - Wi-Fi - Connect to network > Choose the network and type the password that you want to connect to.

Bluetooth Setting

Click Setting icon on the homepage, Network - Bluetooth - Search for Bluetooth device > Click search and pair the device that you want to connect to.

CEC Setting

Click Setting icon on the homepage, Network-HDMI CEC,CEC > Enable. CEC devices such as TV sticks can be controlled remotely with remote control.

Picture Setting

Click Setting icon on the homepage, Picture > Perform personalized picture settings, change picture mode, set eye protection mode, set noise reduction DLC.

Sound Setting

Click Setting icon on the homepage, Sound > Set the sound quality balance of the machine sound, adjust the sound mode, set the AVC, surround effect, and choose the output device and output format of the sound.

Lens Setting

Click Setting icon on the homepage, Lens > Set the projection direction, autofocus settings, keystone correction, digital zoom.

Device Preference

Click Setting icon on the homepage, Device Preference > Change language, set date and time, choose keyboard, set sleep timer, check device information, reset projector, restart projector, whale OS cast, set energy saver, menu timer, location, power desktop.

Whale OS Cast

Click Setting icon on the homepage, Device Preference - WhaleS Cast > Three mirroring ways are available <TV Casting, DLNA, Miracast>

App Setting

Click Setting icon on the homepage, App setting > Check recently opened applications, view all applications, and app permissions.

Voice Service

Click Setting icon on the homepage, Voice Service > The language selection and timbre of intelligent speech can be adjusted.

Software Update

Click Setting icon on the homepage, Software Update > Update the software and view the current software information.

File Management

Insert the U disk, click the File icon on the homepage. The content of U disk could be read, such as video, audio, picture, etc.

Bluetooth Speaker

1. Find the Bluetooth speaker icon on the desktop, click to enter the Bluetooth speaker mode.
2. Search for machine Device name (Projector) on your mobile phone, and then pair and connect.
3. Click <Turning off the screen> to turn off the screen, and press the back button to exit the screen off state.

Signal Source

Click the signal source icon on the homepage, choose HDMI input signal source.

TV Casting

Tip: The Android devices / iOS devices must be on the same WiFi as the projector

1. Click Setting-Device Preference - WhaleOS Cast-TV casting, open the TV casting page or press the cast button to open the TV casting page.
2. Scan the QR code to download and install the TV Casting app, open the app and authorize the necessary permissions.
3. Click on the device name to start mirroring.

Airplay

Tip: The iphone/iPad must be on the same WiFi as the projector

1. Click Setting - Device Preference - WhaleOS Cast-TV casting, open the TV casting page or press the cast button to open the TV casting page.
2. Open your iPhone Control Centre and select Screen Mirroring.
3. Click device name.

DLNA

Tip: Your app must supports DLNA services (Android devices/iOS devices must be on the same WiFi as the projector)

1. Click Setting - Device Preference - WhaleOS Cast -TV casting, open the TV casting page or press the cast button to open the TV casting page.
2. Open the video playing. Click the Screen Casting icon.
3. Select the device name.

Miracast

1. Click Setting - Device Preference - WhaleOS Cast-Miracast to open the Miracast page.
2. Android phone/pad pull down the status bar and click Screen Cast.
3. Select device name.

Safety Instructions

Please pay attention to important information regarding the operation and maintenance of the projector. It's crucial to carefully read this information to avoid problems. Adhering to safety instructions will extend the projector's lifespan.

• Seek assistance from qualified personnel for installation and repair services. Do not utilize damaged wires, accessories, or other peripherals.
• Ensure the projector is kept away from flammable, explosive, and areas with strong electromagnetic interference (such as large radar stations, power stations, substations, etc.). Avoid exposure to strong ambient light (direct sunlight).
• Do not obstruct projector vents.
• Always use the original power adapter.
• Maintain adequate ventilation, ensuring vents are not obstructed to prevent projector overheating.
• Avoid looking directly into the lens while the projector is operating. Direct exposure to strong light may cause eye damage.
• Refrain from bending or dragging the power cord.
• Do not place the power cord underneath the projector or heavy objects.
• Do not expose the power cord to heat.
• Refrain from touching the power adapter with wet hands.

Special Reminder

To ensure the performance and stability of the projector, please place it horizontally and leave a space of about 30 cm between the projector and the obstacle.

• Do not install in places with poor ventilation.
• Do not install in high temperature or humid places.
• Do not block the vents.
• Do not install in dusty or smoky places.

Disclaimer

This manual provides general instructions. The pictures and functions in this manual are subject to the actual product. XGODY is devoted to improving product performance and reserves the right to modify product functions and interfaces described in this manual without notice.

Please keep your device properly. XGODY is not responsible for any loss caused by wrong operation of software/hardware, repairing, or any other reasons. XGODY is not responsible for any loss claimed by any third party.

This manual has been carefully checked by professional engineers; please understand for any inevitable omissions.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Recycling

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give their product to a competent recycling organization. This product can be used across EU member states.

EU Compliance Statement: Chengdu Hotack Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.

A copy of the EU Declaration of Conformity is available online at https://xgody.com/pages/doc

Warranty Card