XGODY N6 Pro Projector User Manual

File Management

Insert the U disk, then click the File icon on the home page. You can read the contents of the U disk, such as video, audio, images, etc.

[Image description: A screenshot of a file manager interface showing folders like 'All', 'Video', 'Music', 'Image', 'Document' and a 'Local Disk'.]

Bluetooth Speaker

1. Click the Bluetooth speaker icon on the desktop to enter Bluetooth speaker mode.

2. Search for the device name (projector) on your mobile phone, then pair and connect it.

3. Click <Turn off screen> to turn off the screen, and press the Back button to exit the turned-off screen state.

[Image description: A projector displaying a mountain landscape with text 'Projector', 'Bluetooth mode', and 'Waiting for connection...'. A button at the bottom says 'TURN OFF SCREEN'.]

[Image description: A diagram of a remote control with labels pointing to 'Bluetooth Speaker' and various buttons like power, volume, navigation, and app shortcuts.]

Signal Source

Click the signal source icon on the home page and select the HDMI input signal source.

[Image description: A screenshot of a smart TV interface showing various streaming service logos like Netflix, Prime Video, Hulu, Disney+, etc., with a 'Source' option highlighted, showing 'HDMI' as the selected input.]

TV Casting

Tip: Android/iOS devices must be on the same WiFi network as the projector.

1. Click Settings > Device Preferences > WhaleOS Cast > TV Casting, open the TV casting page, or press the cast button to open the TV casting page.

[Image description: A projector screen showing a northern lights display with a phone mirroring the screen. A QR code is visible on the projector screen for downloading an app. A button on the projector reads 'Whale(xxxx)'.]

2. Scan the QR code to download and install the TV Casting app, open the app, and authorize the necessary permissions.

3. Click the device name to start mirroring the screen.

[Image description: A mobile phone screen showing a list of found devices for screen mirroring, with 'Whale(xxxx)' highlighted.]

Airplay

Tip: iPhone/iPad must be on the same WiFi network as the projector.

1. Click Settings > Device Preferences > WhaleOS Cast > TV Casting, open the TV casting page, or press the cast button to open the TV casting page.

[Image description: Same as the TV Casting image description above.]

2. Open your iPhone's Control Center and select Screen Mirroring.

[Image description: A screenshot of an iPhone's Control Center with the 'Screen Mirroring' icon highlighted.]

3. Click the device name.

[Image description: A mobile phone screen showing 'Screen Mirroring' options, with 'Whale(xxxx)' highlighted.]

DLNA

Tip: Your app must support DLNA services (Android/iOS devices must be on the same WiFi network as the projector).

1. Click Settings > Device Preferences > WhaleOS Cast > TV Casting, open the TV casting page, or press the cast button to open the TV casting page.

[Image description: Same as the TV Casting image description above.]

2. Open the video being played. Click the Screen Casting icon.

[Image description: A video player interface showing a tropical beach scene. A 'Screen Casting' icon is visible in the top right corner.]

3. Select the device name.

[Image description: A 'Select a device' pop-up window showing 'WHALE(XXXX)' as an option.]

Miracast

1. Click Settings > Device Preferences > WhaleOS Cast > Miracast to open the Miracast page.

[Image description: A projector screen showing a 'Miracast' connection status with 'Waiting for device connection...' text.]

2. On an Android phone/tablet, pull down the status bar and click 'Screencast'.

[Image description: A screenshot of an Android phone's quick settings panel with 'Screencast' highlighted.]

3. Select the device name.

[Image description: A list of available wireless displays, with 'Whale(xxxx)' highlighted.]

Safety Instructions

Pay attention to important information regarding the operation and maintenance of the projector. Reading this information carefully is essential to avoid problems. Adhering to the safety instructions will prolong the projector's lifespan.

• Seek assistance from qualified personnel for installation and repair services. Do not use damaged cables, accessories, or other peripherals.
• Ensure the projector is kept away from flammable, explosive materials and areas with strong electromagnetic interference (e.g., large radar stations, power plants, substations, etc.). Avoid strong ambient light (direct sunlight).
• Do not block the projector's ventilation grilles.
• Always use the original power adapter.
• Ensure adequate ventilation and make sure the ventilation grilles are not blocked to prevent projector overheating.
• Avoid looking directly into the lens while the projector is operating. Direct exposure to strong light can cause eye damage.
• Avoid kinking or pulling the power cord.
• Do not place the power cord under the projector or under heavy objects.
• Do not expose the power cord to heat.
• Do not touch the power adapter with wet hands.

Special Reminder

To ensure the projector's performance and stability, place it horizontally and leave a space of approximately 30 cm between the projector and any obstacles.

[Image description: Diagrams illustrating the recommended 30cm clearance around the projector from all sides.]

Do not install in poorly ventilated areas.

Do not install in high temperature or high humidity areas.

Do not block the vents.

Do not install in dusty or smoky areas.

Disclaimer

This manual provides general instructions. The images and functions in this manual should refer to the actual product. XGODY is committed to improving product performance and reserves the right to modify product functions and interfaces described in this manual without prior notice.

Please store your device properly. XGODY is not responsible for any losses caused by incorrect software/hardware operation, repairs, or other reasons. XGODY is not responsible for the loss of third-party claims.

This manual has been carefully reviewed by a professional engineer; please understand any unavoidable omissions.

FCC Declaration

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference.
• (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

RECYCLING

This product bears the selective sorting symbol for Waste Electrical and Electronic Equipment (WEEE). This means that this product must be handled in accordance with European Directive 2012/19/UE to be recycled or dismantled to minimize its environmental impact. The user has the option to hand over their product to a competent recycling organization. This product can be used in all EU member states.

EU Declaration of Conformity: Chengdu Hotack Technology Co., Ltd. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/UE. A copy of the EU Declaration of Conformity is available online at https://xgody.com/pages/doc.

Warranty Card

Customer Name:

Customer ID:

Shop Purchased:

Customer Phone Number:

Sender:

Description of Fault: