XGODY Smart Projector User Manual

Specifications

Packing List

• Intelligent Projector x1
• HDMI Cable x1
• Remote Control x1 (Batteries not included)
• Power Cable x1
• User Manual x1

Descriptive Structure

This manual is for reference only. It is subject to change without notice. XGODY reserves the right of final interpretation.

IR Receiver

Ports: HDMI Input, 3.5mm Stereo Jack, USB Input, IR Receiver, ON/OFF, Power Input

Tips for Blurry Images

Click the Settings icon on the home page - Settings - Lens - Automatic Focus Settings to adjust image clarity. Press the focus button on the remote control to achieve the best clarity.

Cleaning Method

1. Prepare a screwdriver and unscrew the screws.
2. Clean the projector with a cotton swab.
3. Install the bottom cover after cleaning.

Remote Control

Buttons: Power, Input, Google Assistant, Bluetooth Speaker, Settings, D-Pad with central selection, Menu, Home, Casting TV, VOL+/-, Focus +/-, Mute, Netflix, YouTube, Disney+, Prime Video.

Note: For the Bluetooth remote control interface, press the "Voice Input" button to display the corresponding guide.

Getting Started

1. Connect the power cable to the projector.
2. Press the power button to turn on the projector.

Use manual focus by pressing the "Focus" button on the remote control.

Tips: Ensure the projector is horizontal relative to the projection screen.

Home Screen User Interface

The home screen displays trending content and various application shortcuts.

Network Configuration

Click the Settings icon on the home page, then navigate to Network - Wi-Fi - Connect to Network. Select your network and enter the password.

Bluetooth Settings

Click the Settings icon on the home page, then navigate to Network - Bluetooth - Search for Bluetooth Device. Click Search and pair the device you wish to connect to.

CEC Settings

Click the Settings icon on the home page, then navigate to Network - HDMI - CEC - Activate. CEC devices, such as TV sticks, can be controlled remotely with the remote control.

Image Settings

Click the Settings icon on the home page, then navigate to Image. Customize image settings, modify image mode, set eye protection mode, and adjust noise reduction (DLC).

Sound Settings

Click the Settings icon on the home page, then navigate to Sound. Adjust sound balance, sound mode, AVC, surround effect, and select the audio output device and format.

Lens Settings

Click the Settings icon on the home page, then navigate to Lens. Set projection direction, auto-focus parameters, keystone correction, and digital zoom.

Device Preferences

Click the Settings icon on the home page, then navigate to Device Preferences. Modify language, set date and time, choose keyboard, set sleep timer, check device information, reset projector, restart projector, cast Whale OS, set power saving, menu timer, location, and desktop power.

• Language: French (France)
• Date and Time
• Keyboard
• Device Mode: Standard Mode
• Screen Saver
• Sleep Timer: Disabled
• About
• Factory Settings
• Reset Projector
• Restart Projector

Whale OS Casting

Click the Settings icon on the home page, then navigate to Device Preferences - WhaleOS Cast. Three mirroring methods are available: TV Casting, DLNA, Miracast.

Application Settings

Click the Settings icon on the home page, then navigate to Application Settings. View recently opened applications, all applications, and application permissions.

Voice Service

Click the Settings icon on the home page, then navigate to Voice Service. Language selection and intelligent speech timbre can be adjusted.

• Language: English (United States)
• Other Settings: Timbre, Competence

Software Update

Click the Settings icon on the home page, then navigate to Software Update. Update the software and view current software information.

File Management

Insert a USB drive and click the File icon on the home page. USB drive content, such as video, audio, and images, can be read.

Folders: ALL, Video, Music, Image, Document

Device: Local Disk

Bluetooth Speaker

1. Find the Bluetooth speaker icon on the desktop and click to enter Bluetooth speaker mode.
2. Find the device name (projector) on your mobile phone, pair, and connect.
3. Click "Turn off screen" to turn off the screen, and press the Back button to exit the screen-off state.

Projector

Speaker mode

waiting for connection........

TURNING OFF THE SCREEN

Signal Source

Click the signal source icon on the home page and select the HDMI input signal source.

Casting TV

Tip: Android/iOS devices must be on the same Wi-Fi network as the projector.

1. Click Settings - Device Preferences - WhaleOS Cast - TV Casting, open the TV casting page, or press the casting button to open the TV casting page.
2. Scan the QR code to download and install the TV Casting application, open the application, and grant necessary permissions.
3. Click the device name to start mirroring.

Airplay

Tip: iPhone/iPad must be on the same Wi-Fi network as the projector.

1. Click Settings - Device Preferences - WhaleOS Cast - TV Casting, open the TV casting page, or press the casting button to open the TV casting page.
2. Open your iPhone's control center and select Screen Mirroring.
3. Click the device name.

DLNA

Tip: Your application must support DLNA services. Android/iOS devices must be on the same WiFi network as the projector.

1. Click Settings - Device Preferences - WhaleOS Cast - TV Casting, open the TV casting page, or press the casting button to open the TV casting page.
2. Open the video currently playing. Click the Screen Casting icon.
3. Select the device name.

Miracast

1. Click Settings - Device Preferences - WhaleOS Cast - Miracast to open the Miracast page.
2. Android phone/tablet: Swipe down the status bar and click Screen Cast.
3. Select the device name.

Safety Instructions

Please pay attention to important information regarding the operation and maintenance of the projector. It is essential to read this information carefully to avoid problems. Adhering to safety instructions will prolong the projector's lifespan.

• Request assistance from qualified personnel for installation and repair services. Do not use damaged cables, accessories, or other peripherals.
• Ensure the projector is kept away from flammable, explosive, and high electromagnetic interference zones (e.g., large radar stations, power plants, substations, etc.). Avoid exposure to strong ambient light (direct sunlight).
• Do not obstruct the projector's vents.
• Always use the original power adapter.
• Maintain adequate ventilation, ensuring vents are not blocked to prevent overheating.
• Avoid looking directly into the lens while the projector is operating. Direct exposure to strong light can damage your eyes.
• Avoid bending or pulling the power cord.
• Do not place the power cord under the projector or heavy objects.
• Do not expose the power cord to heat.
• Avoid touching the power adapter with wet hands.

Special Reminder

To ensure the projector's performance and stability, please place it horizontally and maintain a distance of approximately 30 cm between the projector and obstacles.

• Do not install in poorly ventilated areas.
• Do not install in high-temperature or humid environments.
• Do not block the vents.
• Do not install in dusty or smoky environments.

Disclaimer

This manual contains general instructions. Images and function icons in this manual should conform to the actual product. XGODY strives to improve its product performance and reserves the right to modify product functions and interfaces described in this manual without prior notice. Please keep your device properly. XGODY is not responsible for any loss caused by misuse, improper repair, or any other reason. XGODY is not responsible for any loss resulting from third-party claims. This manual has been carefully verified by a professional engineer. Please understand any unavoidable omissions.

FCC Declaration

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This signifies that the product must be treated in accordance with European Directive 2012/19/UE for recycling or dismantling to minimize its environmental impact. The user can choose to entrust their product to a competent recycling organization. This product can be used in all EU member states.

EU Declaration of Conformity: Chengdu Hotack Technology Co., Ltd. hereby declares that this apparatus is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/UE. A copy of the EU Declaration of Conformity is available online at https://xgody.com/pages/doc.

Warranty Card