HOMCOM 839-883V00 L-Shaped Sofa Assembly Instructions

General Information and Safety

IMPORTANT: Retain for future reference. Read carefully.

This product is intended for domestic use only.

Instructions for Use:

• Place the sofa stably on a flat floor.
• Keep away from open flames and heat sources.
• Avoid overloading the sofa.

Precautions Before Assembly:

• Prepare a clean and dry assembly area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance:

• Clean with a soft fabric.
• Regularly check the sofa structure.

Storage Conditions:

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Caution: Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to improper installation or environmental factors.

If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.

Packing Details

The product is shipped in 2 boxes.

Parts List:

• Part A: Sofa Seat Frame (1)
• Part B: Sofa Base / Chaise Section Base (1)
• Part C: Back Cushion - Right (1)
• Part D: Back Cushion - Middle (1)
• Part E: Back Cushion - Left (1)
• Part F: Armrest (1) - Diagram shows attachment to cushion E.
• Part G: Armrest (1) - Diagram shows attachment to cushion D.
• Part H: Armrest (1) - Diagram shows attachment to cushion C.
• Part I: Backrest Cushion - Right (1)
• Part J: Backrest Cushion - Middle (1)
• Part K: Backrest Cushion - Left (1)
• Part L: Chaise Seat Cushion (1)
• Part M: Chaise Backrest Cushion (1)
• Part N: Sofa Backrest Frame (1)
• Part O: Sofa Seat Frame (1)
• Part P: Legs (8)

Hardware Kit:

• Hardware 1: M8*60 MM Screws (8 + 1 spare)
• Hardware 2: Washers (8 + 1 spare)
• Hardware 3: Allen Key (1)
• Hardware 4: M4*30 MM Screws (32 + 1 spare)

Cushion Inflation Instructions

Your sofa cushions are vacuum-packed for shipping. To restore their shape, follow these steps:

1. Step 1: Carefully open the vacuum bag, avoiding damage to the cushion.
2. Step 2: Gently press from the sides to let air enter.
3. Step 3: Press from the front to ensure even expansion.
4. Step 4: Adjust each section until the surface is even.

After inflation, place the cushions in a dry, ventilated area for 72-96 hours to reach optimal use condition.

Assembly Instructions

1. Step 01: Attach 4 legs (P) to the sofa seat frame (A) and sofa base (B). Use M4*30 MM screws (4) and the Allen Key (3).
2. Step 02: Connect the sofa base (B) to the sofa seat frame (A). Ensure the legs are correctly attached.
3. Step 03: Connect the chaise section base (B) to the main sofa seat frame (A) to form the L-shape.
4. Step 04: Attach the sofa backrest frame (N) and chaise backrest frame (O) to the assembled base sections (A and B). Use M8*60 MM screws (1), washers (2), and the Allen Key (3).
5. Step 05: Prepare the main back cushions (C, D, E).
6. Step 06: Attach armrests (F, G, H) to the corresponding back cushions (E, D, C).
7. Step 07: Place the prepared back cushions (C, D, E) onto the sofa frame.
8. Step 08: Place the chaise seat cushion (L) and chaise backrest cushion (M) onto the chaise section of the sofa.
9. Step 09: Place the backrest cushions (I, J, K) onto the sofa backrest frame.

Assembly is now complete. Enjoy your new sofa!