JBL TUNE510BT Quick Start Guide

This guide provides essential information to get you started with your JBL TUNE510BT headphones.

What's in the Box

Inside the box, you will find:

JBL TUNE510BT Headphones
USB-C Charging Cable
User Manual
Warranty Card

Power On & Connect

Power On and Automatic Pairing: Press and hold the power button for 2 seconds. The headphones will turn on and automatically enter pairing mode.

Manual Pairing Mode: To enter manual pairing mode, press and hold the power button for more than 5 seconds.

Connecting to a Device: 1. Turn on your headphones. 2. On your device (smartphone, tablet, etc.), go to Bluetooth settings. 3. Select "JBL TUNE510BT" from the list of available devices to connect.

Power Off: Press and hold the power button for more than 5 seconds to turn off the headphones.

Button Command

Volume Up / Next Track: Press the '+' button once. Press and hold for volume up.
Volume Down / Previous Track: Press the '-' button once. Press and hold for volume down.
Play/Pause/Call Management: Press the center button once to play/pause music or answer/end calls.
Voice Assistant: Press and hold the center button for 2 seconds to activate Siri or Google Assistant.

Multi-Point Connection

The JBL TUNE510BT can connect to two Bluetooth devices simultaneously.

Connect to the first Bluetooth device.
Turn on Bluetooth on the second device and select "JBL TUNE510BT" to connect.
To switch music sources, pause music on the current device and select play on the second device.
Phone calls will always take priority.
If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.
To disconnect multi-point, select "Forget this device" on your Bluetooth devices.

Charging

Connect the USB-C charging cable to the headphones and a power source.

Full Charge: Approximately 2 hours.
Quick Charge: 5 minutes of charging provides approximately 2 hours of music playtime.

LED Behaviors

Power On/Off: LED flashes briefly.
Bluetooth Connecting: LED flashes blue.
Bluetooth Connected: LED is solid blue.
Low Battery: LED flashes red.
Charging: LED is red.
Fully Charged: LED turns off (or white, depending on model revision).

Technical Specifications

Model	TUNE 510BT
Driver Size	32 mm / 1.26" Dynamic driver
Power Supply	5V-1A
Weight	160 g / 0.35 lbs
Headset Battery Type	Lithium-ion battery (3.7V / 450 mAh)
Charging Time	Up to 2 hours
Music Playtime with BT On	Up to 40 hours
Frequency Response	20 Hz - 20 kHz
Impedance	32 ohm
Sensitivity	103.5 dB SPL@ 1kHz / 1mW
Maximum SPL	95 dB
Microphone Sensitivity	-29 dBV@1kHz / Pa
Bluetooth Version	5.0
Bluetooth Profile Version	A2DP v1.3, AVRCP v1.6, HFP v1.7
Bluetooth Transmitter Frequency Range	2.4 GHz - 2.4835 GHz
Bluetooth Transmitted Power	<8 dBm
Bluetooth Transmitted Modulation	GFSK, π/4DQPSK, 8DPSK
Maximum Operation Temperature	45 °C

	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, power on and connect, manual pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, powering on, pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering what's in the box, power and connect instructions, manual pairing, button commands, multi-point connection, charging, LED behaviors, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and LED behaviors.
	JBL TUNE510BT Quick Start Guide A concise guide to setting up and using your JBL TUNE510BT headphones, covering power, pairing, button commands, multi-point connection, charging, and LED indicators.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and technical specifications.
	JBL TUNE510BT Quick Start Guide A quick start guide for the JBL TUNE510BT headphones, covering setup, pairing, button commands, multi-point connection, charging, and technical specifications.