Frisco 3-in-1 Dog & Cat Stroller

Assembly and User Guide

Components

  • Cup Holder (1): A holder designed to attach to the stroller handle.
  • Back Seat Strap (1): A strap with buckles for securing the seat.
  • Carrier (1): The detachable fabric basket for the pet.
  • Support Boards (2): Two flat, grey rectangular pieces.
  • Front Wheels (2): Two wheels with a spoked design.
  • Pad (1): A cushioned insert for the carrier.
  • Visor (1): A canopy piece that attaches to the stroller.
  • Frame with Assembled Back Wheels and Cargo Basket (1): The main stroller base with rear wheels and a storage basket.

Assembly

DO NOT SKIP THIS STEP Lay the parts out flat on the ground so that you have a clear visual of everything that is included.

Step 1 - Unfold

Unfold the pet stroller and snap it into place. Make sure that the black locks on the sides are locked into place. [Step 1 image: Person unfolding the stroller and showing the side locks.]

Step 2 - Front Wheels

Lay the stroller flat on the ground and insert the front wheels into the legs until they snap into place. (Pro tip: give it a good tug to make sure it's secured.) [Step 2 image: Close-up of front wheel being inserted into stroller leg.] [Step 3 image: Stroller with front wheels attached.]

Step 3 - Back Wheels

Lock the rear wheels by simply pushing down the brake levers on either side. [Step 3 image: Close-up of brake lever on rear wheel.]

Step 4 - Carrier Assembly

Slide both support boards (they look like two flat, grey squares) into the open slots on the carrier. Make sure the support bars face outside of the carrier. This way you know it's been inserted correctly. Fold the fabric over and press the hook-and-loop fasteners together, then zip to close. Place the pad into the center of the carrier. [Step 4a image: Inserting support boards into carrier slots.] [Step 4b image: Securing carrier fabric with hook-and-loop fasteners and zipper.]

Step 5 - Mounting the Carrier

Zip the carrier shut and place it on top of the cargo basket. You should see a buckle on either side: use them to secure the carrier in place. Use the provided straps to tighten over the stroller frame if necessary. [Step 5 image: Carrier being placed and buckled onto the stroller frame.]

Attachments

Cup Holder

Attach the cup holder to your preferred side of the handle. [Image: Cup holder being attached to stroller handle.]

Visor

Now it's time to attach the visor. Just snap the clamps onto the frame at the desired height. [Image: Visor being snapped onto the stroller frame.]

Car Seat Mode

If you'd like to switch the stroller to car seat mode, here's what you do:

  • Detach the carrier from the stroller and place it sideways on the car seat. Next, feed the seatbelt through the side loops of the carrier, located underneath the side buckle.
  • Attach the back seat strap to the carrier and over the headrest for extra support. This strap may also be used as a shoulder strap when used as a portable carrier.

WARNING

  • Not intended for children.
  • NEVER leave pet unattended. ALWAYS keep pet in view while in the stroller.
  • Adult assembly required. Take care when unpacking and assembling; contains small parts and some items with sharp edges.
  • To prevent a possible choking hazard, remove and discard packing material before using this product.
  • DO NOT carry or roll stroller on stairs or escalators with pet inside.
  • DO NOT hang heavy items on handlebar as this can cause the stroller to tip.
  • Be sure stroller is fully assembled and locked in unfolded position before using.
  • ALWAYS exercise care when going over curbs or steps, and never use stroller for anything other than transporting your pet.
  • Push stroller at a normal walking pace only; faster strolling can cause a loss of control and injury to the pet.
  • DO NOT place hot liquids in cup holder.
  • DO NOT use stroller if any parts are missing or broken.
  • DO NOT carry additional pets, goods, or accessories in or on this stroller except as advised in these instructions.
  • DO NOT exceed the listed weight restriction.
  • Care must be taken when folding or unfolding stroller to prevent finger injury to you or your pet in hinge areas.
  • Make sure pet is not in the seat or near the stroller when folding or unfolding.
  • NEVER leave stroller on a hill or incline, even with brakes set. Stroller may tip, injuring the pet.
  • To avoid accidental rolling, ALWAYS set brakes when stroller is not being pushed.
  • DO NOT suspend strings or toys from the canopy to avoid strangulation.
  • When making adjustments to the stroller, ALWAYS ensure that all parts of the pet's body are clear of any moving parts of the stroller.

To fold the stroller:

  1. Remove the carrier from the stroller.
  2. Pull up both side locks.
  3. Fold the pet stroller.
  4. Secure the side safety lock.
Models: 360993 3 In 1 Dog and Cat Stroller With Detachable Carrier, 360993, 3 In 1 Dog and Cat Stroller With Detachable Carrier, Cat Stroller With Detachable Carrier, Detachable Carrier

PDF preview unavailable. Download the PDF instead.

360992 AssemblyInstructions. V1659644809 Microsoft: Print To PDF

Related Documents

Preview FRISCO 55-inch Faux Fur Cat Tree & Condo: Assembly and Use Guide
Comprehensive assembly and care instructions for the FRISCO 55-inch Faux Fur Cat Tree & Condo. Learn how to build and maintain this pet furniture for your cat's enjoyment.
Preview Frisco Ultimate Stackable Heavy Duty Steel Metal Dog Crate Instruction Manual
Comprehensive instruction manual for the Frisco Ultimate Stackable Heavy Duty Steel Metal Dog Crate, covering assembly, wheel attachment, stacking, lock usage, maintenance, training tips, and important safety warnings. Includes model numbers and contact information for Chewy.
Preview Frisco Two Story Cat Litter Box Cover Assembly Instructions
Step-by-step assembly guide for the Frisco Two Story Cat Litter Box Cover, including a detailed parts list, safety precautions, and cleaning tips. Perfect for pet owners looking to assemble their cat's new litter box enclosure.
Preview Frisco Cat Tracks Step-by-Step Setup and Care Guide
Detailed instructions for setting up and caring for the Frisco Cat Tracks toy (models 305928/345926), including safety warnings and contact information.
Preview FRISCO 38-inch Cat Tree Assembly Instructions
Step-by-step assembly guide for the FRISCO 38-inch Cat Tree (Models 214377, 214378), detailing parts, dimensions, and clear instructions for building a safe and enjoyable cat play structure.
Preview Frisco Deluxe Plastic Outdoor Dog House Assembly Instructions
Comprehensive guide to assembling the Frisco Deluxe Plastic Outdoor Dog House, including warnings, component identification, and step-by-step instructions for a safe and secure pet shelter.
Preview Frisco Pet Fountain Instruction Manual and Care Guide
Comprehensive instruction manual for the Frisco Pet Fountain, covering cleaning, maintenance, setup, intended use, and safety warnings. Includes SKU 316358 details.
Preview FRISCO Holiday Christmas Tree Cardboard Cat House Assembly Instructions
Step-by-step guide to assembling the FRISCO Holiday Christmas Tree Cardboard Cat House (CW-10379). Learn how to connect panels, reinforce seams, and attach the star for your pet's festive new hideaway.