Overview
This section provides an exploded view of the Deluxe Plastic Outdoor Dog House, illustrating how the components fit together. The diagram shows the house structure with numbered parts:
- Part 1: Front Panel (with door opening)
- Part 2: Back Panel (solid)
- Part 3: Side Panels (two identical pieces)
- Part 4: Roof Panels (two pieces)
- Part 5: Bottom Panel (base)
The diagram visually depicts the assembly sequence, showing how the side panels connect to the bottom panel, followed by the back and front panels, and finally the roof panels.
Warnings & Cautions
Please read and follow all warnings and instructions to avoid pet injury or property damage.
- This product is not for human use. Never allow children to play in or on the house. For dog use only.
- Follow the instructions carefully and ensure each step is completed.
- Keep away from heat sources and open flames.
- Do not sit on, climb on, or shake the product.
- This plastic product is suitable for providing temporary shelter for pets in an outdoor environment.
- Choose a location that is leveled and dry, as well as being as sheltered from the weather as possible.
- Check your dog house often for loose screws or parts that might need re-tightening.
- If your dog house gets torn or damaged, please discard it.
- The product photo may vary slightly from your fully assembled dog house as this product is continually being enhanced.
Components
Prior to assembly, be sure to identify and sort all components shown below.
1PC Front Panel
(Features a door opening)1PC Back Panel
(Solid panel)2PCS Side Panel
(Rectangular panels with connection notches)2PCS Roof Panel
(Pieces to form the pitched roof)2PCS Bottom Panel
(The base of the dog house)
Assembly Instructions
Tip: This item has predrilled holes to make set up easier for your dog's home.
STEP 1
Connect bottom panel (5).
[Diagram: Shows the bottom panel, labeled '5'.]
STEP 2
Insert side panel (3) into notches.
[Diagram: Shows a side panel (3) being inserted into the notches of the bottom panel (5).]
STEP 3
Turn the house on its side and insert side panel (3) into notches.
[Diagram: Shows the partially assembled structure tilted, with the second side panel (3) being inserted into the notches of the bottom panel (5).]
STEP 4
Turn the house vertically to attach the back panel (2) by placing it into the notches on panel (3).
[Diagram: Shows the structure upright, with the back panel (2) being attached to the side panels (3).]
STEP 5
Flip the house to rest the back panel (2) on the floor and insert the front panel (1) into the notches.
[Diagram: Shows the structure tilted onto its back panel (2), with the front panel (1) being inserted into the side panels (3).]
STEP 6
Connect the roof panel (4).
[Diagram: Shows the two roof panels (4) being joined together.]
STEP 7
Place the connected roof panel onto the house starting with the notches closer to the center of the roof and attach the corners once the middle is fully secured.
[Diagram: Shows the assembled roof being placed and secured onto the main body of the dog house.]
Finished Assembly
[Diagram: A complete, assembled Deluxe Plastic Outdoor Dog House.]
Questions? Call our customer service ? 1-800-672-4399
