Cat Tracks Step by Step
SET UP INSTRUCTIONS
For cat tracks model 305928/345926
Step 1
Set part A on a flat surface. Line up the hooks with the slots on each track to snap them into place. Follow the alphabet: Part B goes on top of part A, and then part C and part D. Place one ball in part D, then install part E.
Assembly diagram: Shows parts A (base), B, C, D, and E stacked vertically. Part D is shown with a ball inside before being placed. Part E is the final top piece.
Step 2
Insert the top piece into the hole at the top of the tracks, and push into place. To replace the top piece, simply push firmly from underneath the piece to remove it.
*Each cat tracks includes a unique top piece; yours may vary from the one pictured.
Top piece insertion diagram: Shows the top piece being pushed into the central opening of the assembled tracks. A separate illustration depicts pushing from the underside to detach the top piece.
Step 3
Insert the rolling balls onto the remaining tracks, however kitty likes them.
Ball insertion diagram: Shows balls being dropped into the circular tracks of the toy.
CARE INSTRUCTIONS
Wipe with a damp cloth to clean.
