HAVSDUN

Safety and Compliance

Installation Instructions

⚠️ CAUTION:

Before starting, turn off power at the main circuit panel.

⚠️ CAUTION!

The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.

ℹ️ FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

❗ WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Importer Information (Mexico)

Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310. Read and follow all safety and operation instructions before using this product/For indoor use/Consult electrical specifications on the product label.

Assembly Instructions

Parts and Tools

Diagram showing required parts: a wall mounting bracket, two screws, a wall plate, and the main lamp body. Also shows two types of screwdrivers (Phillips head and flathead).

Parts included:

• 1x Wall mounting bracket
• 1x Wall plate
• 1x Lamp body (shade)
• 2x Screws

Steps

1. Step 1: Attaching the lamp shade to the mounting bracket. The diagram shows a hand sliding the cylindrical lamp shade onto a base attached to a wall. An 'i' icon indicates important information.
2. Step 2: Mounting the bracket to the wall. The diagram shows the wall mounting bracket being attached to an electrical box on the wall using two screws.
3. Step 3: Attaching the wall plate. The diagram shows the wall plate being attached to the mounting bracket.
4. Step 4: Wiring preparation. Electrical wires are shown being fed through the wall plate.
5. Step 5: Connecting the lamp body. The diagram shows the lamp body being connected to the wall plate, with wires passing through.
6. Step 6: Electrical connections. The diagram details the wiring. Three sets of wires are shown: Live (indicated by brown/black insulation), Neutral (indicated by blue/white insulation, possibly with a tracer), and Earth/Ground (indicated by green/yellow insulation). Wire connectors are used to join the corresponding wires from the mains supply to the lamp. The process involves twisting the wires together securely within the connectors.
7. Step 7: Securing the lamp assembly. The diagram illustrates securing the lamp assembly to the wall plate using two screws.
8. Step 8: Final attachment of the lamp body. The diagram shows the main lamp body being slid onto the mounted bracket. An 'i' icon indicates important information.
9. Step 9: Final click. The diagram depicts the final step of pushing the lamp shade onto the base until it audibly clicks into place. The text "Click!" is shown near the connection points.
10. Step 10: Dimming function. The diagram illustrates the dimming capability. A light bulb symbol with a slider indicates dimming control. A hand is shown turning a knob on the lamp to adjust brightness, with lines emanating from the bulb to show light output.

Product Information

Model Number: AA-2304832-3

Manufacturer: IKEA Systems B.V.

Year of Manufacture/Copyright: 2021