BLÅVINGAD LED Wall Lamp - Turtle Green
Assembly Instructions
Important Safety Instructions
For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
ℹ️ Important information! Keep these instructions for future use.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
This product contains a light source of energy efficiency class F.
⚠️ WARNING – Strangulation Hazard
NEVER place cord within reach of a child in a cot or playpen.
ALWAYS secure the cord to the wall. Check regularly that the cord is securely fastened.
Pull the cord to remove any slack between the switch and both fasteners. Tie up any remaining slack cord between the fastener and socket.
Please refer to illustrations for guidance on how to secure the cord to the wall.
Product Components
- BLÅVINGAD Turtle Lamp Unit
- Mounting Bracket (Part No. 10091466)
- Power Adapter/Transformer
- Cable Clips (3x of two types, Part No. 158671)
- Screws (for mounting bracket and clips - select appropriate type for your wall material)
Assembly Instructions
Step 1: Mount the Bracket
Attach the mounting bracket (10091466) to the desired wall surface using appropriate screws and wall plugs. Ensure the bracket is securely fastened. ℹ️ [Note: Use screws and plugs suitable for your wall material.]
Step 2: Connect Power Adapter to Bracket
Connect the power adapter cable to the designated port on the mounting bracket. A magnified view in the original document shows the connector being inserted.
Step 3: Plug into Power Outlet
Plug the power adapter into a standard wall socket.
Step 4: Attach the Turtle Lamp
Align the BLÅVINGAD turtle lamp with the mounting bracket. Press the lamp onto the bracket until it securely clicks into place. A magnified view in the original document shows the clipping mechanism engaging.
Step 5: Secure the Power Cord
Route the power cord along the wall and secure it using the provided cable clips (158671). ℹ️ [Note: Use screws with a maximum diameter of 3.2 mm (1/8 inch) for the clips.] Ensure the cord is taut and free of slack where it connects to the lamp and fasteners. ❌ [Diagrams show incorrect clip usage.]
Step 6: Continue Securing Cord
Continue attaching cable clips at intervals to secure the power cord along the wall.
Step 7: Final Cord Management
Ensure all slack in the cord is managed. Tie up any excess cord between the switch and fasteners, and between the fastener and socket.
Step 8: Final Connection and Placement
The lamp is now assembled and connected. Ensure the power cord is safely routed and plugged into the wall socket. The lamp is ready for use.
Product Information
Product Name: BLÅVINGAD LED Wall Lamp
Design and Quality: IKEA of Sweden
Energy Efficiency Class: F
