Important Safety Information
IMPORTANT - READ CAREFULLY - KEEP FOR FUTURE REFERENCE
WARNING! CAUTION - ELECTRICALLY OPERATED PRODUCT.
This product is not recommended for children under 3 years of age. As with all electric products, take precautions during handling and use to prevent electric shock.
ATTENTION: CAUTION: Injury to persons and damage to the lamp and/or mounting surface may occur if the lamp is pulled from the surface. Mount only on a mechanically sound surface to reduce the risk of injury or damage.
WARNING: Deviating from assembly instructions may result in fire or electric shock.
Different materials require different fittings. Always use screws and plugs suitable for the wall material.
WARNING – Strangulation hazard. NEVER place the cord within reach of a child in a cot or playpen. ALWAYS secure the cord to the wall. Regularly check that the cord is securely fastened. Pull the cord to remove slack between the switch and fasteners. Tie up any remaining slack cord between the fastener and socket.
Technical Information
120VAC Max100mA 60Hz
Parts Included
- 1x Lamp base with power cord
- 2x Triangular mounting brackets
- 2x Square cord clips
Assembly Instructions
Step 1: Mount Bracket to Lamp
Secure the mounting bracket to the lamp base using screws. A close-up view shows a screw being inserted into a threaded hole on the lamp's circular mounting plate.
Step 2: Attach Bracket to Lamp
Slide the mounting bracket onto the lamp base. An arrow indicates the direction of insertion.
Step 3: Prepare for Wall Mounting
Prepare for wall mounting. This step shows screws and wall plugs. Note: Use screws with a maximum diameter of 3.2mm (1/8").
Step 4: Attach Lamp to Wall Bracket
Attach the lamp to the wall bracket. Two clips on the lamp's base engage with the wall bracket, indicated by a 'Click!' sound.
Step 5: Secure Lamp to Wall Bracket
Secure the lamp to the wall bracket with screws. A close-up shows a screw being inserted into the bracket.
Step 6: Connect Power
Connect the power adapter to the lamp's power input socket.
Step 7: Secure Cord to Wall
Secure the power cord to the wall using the provided cord clips. Thread the cord through the clips and tighten them with screws (max Ø 3.2mm / 1/8").
Step 8: Continue Securing Cord
Continue securing the power cord along the wall using the remaining clips.
Step 9: Route Power Cord
Route the power cord along the wall to the power outlet.
Bulb Replacement
WHEN CHANGING BULB - use only GUZ 5.3 LED bulb.
To replace the bulb: Unscrew the lamp shade. Remove the old bulb. Insert the new GUZ 5.3 LED bulb. Reattach the lamp shade.
Adjustments
Adjusting the Lamp Head: The lamp head can be tilted up and down, and rotated left and right to direct light as desired.
Adjusting Light Focus: The lamp allows adjustment of the light beam's focus or spread.
