Yeelight Plug-in Sensor Nightlight
Model: YLYD11YL
Product Overview
The Yeelight Plug-in Sensor Nightlight is designed for convenient, automatic illumination. It features an illuminating surface on the front, an ON/OFF button, and a button for removing the power plug. The power plug is located at the bottom.
Note: The illustration is for reference only. The power plug may vary depending on the country or region.
Instructions
Operation
1. Plug the nightlight into a socket. After approximately 3 seconds, the light sensor mode is activated.
- The nightlight automatically turns ON when ambient lighting is less than 2±1 lx.
- The nightlight automatically turns OFF when ambient lighting is more than 13±3 lx.
- When the nightlight is ON, a short press of the ON/OFF button will turn it OFF.
- The light sensor mode reactivates when ambient lighting changes.
- To manually turn the nightlight ON before the sensor activates, briefly press the ON/OFF button.
Changing the Power Plug
2. If you wish to use a different type of power plug, press the Plug Removable Button and rotate the plug counterclockwise to remove the existing plug, then install a new one.
Important Note on Sensor Function
⚠️ To ensure the sensor function operates correctly, it is recommended that the nightlight is not subjected to interference.
Product Details
| Parameter | Value |
|---|---|
| Model No. | YLYD11YL |
| Product Name | Yeelight Plug-in Sensor Nightlight |
| Color Temperature | 2500 K |
| Rated Input | 100–240 V ~ 50/60 Hz 0.01 A |
| Rated Power | 0.5 W |
| Ingress Protection | IP20 |
| Sensor Type | Light Sensor |
Safety Warnings
- Ensure the voltage used matches the product's specified voltage to avoid damaging the light or causing safety hazards.
- For indoor use only.
- The product is not dimmable.
- Caution: Risk of electric shock! The light source of this product is not replaceable. If the light source fails, the entire nightlight must be replaced.
- This product is not suitable for children.
- Keep the product away from water and fire.
- This device is not intended for illuminating emergency exits or for emergency lighting.
Compliance and Declarations
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Plug-in Sensor Nightlight complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available from: Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.
FCC Compliance Statement (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device can generate radio frequency energy, which could cause interferences to products such as radios, TVs, baby monitors, cordless phones, Bluetooth devices, and wireless routers. If interference occurs, the user is encouraged to try to correct it by taking one or more of the following countermeasures:
- Reorient or relocate the receiving antenna.
- Increase spacing between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Disposal and Recycling
♻️ Proper Disposal of this product is required. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the local return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
About Yeelight
Yeelight is the world-leading smart lighting brand, with in-depth exploration in smart interaction, distinctive design, and lighting experience. We continue to define high standards in the lighting industry and offer a portfolio of smart home lighting products, including home furnishing lights, table lights, ambiance lights, and smart lighting control products. Yeelight works relentlessly to integrate cutting-edge technology and professional optical research into its products.
If you appreciate our products, feel free to like our fan page on Facebook, rate our products in our online store, or give us a review on Google.
