Yeelight Blue Smart Bulb
User Manual and Features
CAUTION
- Please confirm the power voltage before installation; incompatible voltage may cause safety issues.
- Do NOT teardown the product.
- Be careful of the glass bulb shade; it may cause injury if you break the glass.
- Because of the heat given by LEDs, please install the bulb in free air, make sure there is no enclosure to trap heat.
PACKAGE INCLUDES
- Yeelight blue bulb x1
- User guide x1
- Warranty card x1
SPECIFICATIONS
| Feature | Details |
|---|---|
| Lighting output | White and RGB |
| Voltage | AC 100~240V 50/60Hz |
| Standby Wattage | Less than 0.3 Watt |
| Wattage | 6 Watt |
| Lumen | 500lm |
| Lifetime | 20000hours+ |
| Connection | Bluetooth 4.0 BLE |
STRUCTURE
A diagram illustrating the structure of the Yeelight bulb, showing distinct parts labeled as 'shade', 'body', 'wireless signal area', and 'holder'.
*The bulb holder may be varied according to specified type.
INSTALLATION
Step 01
Screw the bulb into the socket, turn on the power switch, and ensure the bulb is not in a closed space.
A hand is shown screwing a light bulb into a light socket. A finger is depicted pressing a light switch to turn it on.
Step 02
For iOS app, download from the App Store by searching for "yeelight blue".
For Android app, get it from Google Play by searching "yeelight blue" or from the download page on yeelight.com.
Step 03
Turn on Bluetooth in your mobile phone settings. (No pairing or connection is needed at this step).
Step 04
Start the app and follow the on-screen instructions to enjoy the amazing scene lighting experience.
FEATURES
Top Class LED
Uses high-quality CREE LED for better white light rendering and richer, more detailed colors.
Mobile App Control
Wireless control via low-power Bluetooth, with a control distance of up to 30 meters line-of-sight. Features a user-friendly app interface for easy control.
Timer Switch
The app provides a custom timer switch feature, allowing the bulb to turn on or off at specified times, helping you transition into or out of sleep.
Flowing Color
Features patented Flowing Color technology that analyzes colors from album photos and displays them through bulb color cycling, bringing back warm memories.
Music Rainbow
Yeelight blue bulbs can create a vibrant party atmosphere by changing colors in sync with music.
Multiple Control
Control up to ten bulbs simultaneously. A one-key scene mode function allows for quick switching to preset lighting states for multiple bulbs.
*iOS devices support simultaneous control of ten bulbs; Android device stability depends on the specific model and system.
COMPLIANCE AND ENVIRONMENTAL INFORMATION
This manual is printed on recycled paper to protect the environment and facilitate paper recycling.
Please visit bluetooth.com and search for "yeelight blue" to get detailed information about the end product listing.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
