Yeelight Wireless Charging Nightlight

Product Overview

The product diagram shows the following components:

• Power indicator (green)
• Mobile charging indicator (blue)
• Wireless charging center
• USB cable connecting to a USB plug
• Nightlight with ON/OFF/COLOR TEMPERATURE button
• Nightlight charging indicator

Instruction Manual

1. Connect USB Cable

When the green power indication is on, the product is in standby mode.

2. Change of Color Temperature

Press the ON/OFF-button once for cool light and twice for warm light. Press the button a third time to switch the light off.

3. Wireless Charging

Place your mobile phone on the wireless charging center. When the blue indicator is on, the phone is charging. If it's not charging, reposition the phone until it connects.

Notes

• [!] Please confirm your mobile phone has a wireless charging function.

• [!] If the blue indicator is flashing, wireless charging may be out of connection or the phone is in overvoltage protection. Please change the power adapter or relocate the phone.

4. Nightlight Charging

Place the nightlight in the charging position. The light is charging when the indicator is on. When the light is fully charged, the red indicator turns off automatically.

Basic Parameters

Warning

• Do not place the nightlight near heat sources, under direct sunlight, or in magnetic environments.
• Do not place the nightlight on the wireless charging area to avoid losing its magnetism.
• Do not clean the product with corrosive solvents.
• Keep the product away from children under 3 years old.
• Keep the product away from fire and water.
• Maintain a distance of at least 20 cm between the product and implantable medical devices (e.g., pacemakers, cochlear implants) to prevent interference.
• Do not place magnetic cards (e.g., debit and credit cards) close to the product.
• Recharge the nightlight promptly when it dims or turns off.
• For indoor use only.
• Check the power source before using the product.
• The light source in the nightlight can only be replaced by the manufacturer, its service agent, or a similarly qualified electrician.
• This device contains a built-in battery that can only be replaced by qualified electricians.
• The nightlight must be charged using an approved SELV power supply with a constant output voltage equal to the product's rated voltage.

Compliance Information

RF Exposure and Safety

This device has been evaluated to meet general RF exposure requirements. To maintain compliance with CE RF exposure guidelines, install and operate this equipment with a minimum distance of 20cm between the radiator and your body. Batteries (battery pack or installed batteries) should not be exposed to excessive heat such as sunshine or fire. There is a risk of explosion if a battery is replaced with an incorrect type. Dispose of used batteries according to instructions. Charging: Constant current of 0.2C until voltage reaches 4.25V, then constant voltage 4.25V until charge current reduces to 0.02C.

Transmitted Power: -0.15 dBuA/m @ 10cm distance.

Operating frequency (110-148.5 KHz) can be used in Europe without restriction.

Approval Directive

Compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED); RED 2014/53 EU; EN 62311:2008; EN 60598-1:2015+A1:2018; EN 60598-2-4:2018; Draft ETSI EN 301 489-1 V2.2.0:2017; Final draft ETSI EN 301 489-3 V2.1.1:2017; ETSI EN 303 417 V1.1.1:2017;

EU Declaration of Conformity

Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Wireless Charging Nightlight is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.

FCC Compliance Statement (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device can generate radio frequency energy, which could cause interferences to products like radio, TV, baby monitor, cordless phone, Bluetooth, wireless router, etc. If interference occurs, try one or more of the following countermeasures: (1) Reorient or relocate the receiving antenna. (2) Increase spacing distance between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

WEEE Disposal and Recycling

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

About Yeelight

Yeelight is a world-leading smart lighting brand, focusing on smart interaction, distinctive design, and lighting experience. Yeelight continuously sets high standards in the lighting industry and offers a portfolio of smart home lighting products, including home furnishing lights, table lights, ambiance lights, and smart lighting control products. Yeelight works to integrate cutting-edge technology and professional optical research into its products. If you appreciate Yeelight products, feel free to like their Facebook fan page, rate products in the online store, or leave a review on Google.