VILHATTEN Wardrobe
Assembly Instructions
Safety Warnings
WARNING: Furniture Tip-over Hazard
Children have died from furniture tip-over. To reduce the risk of furniture tip-over:
- ALWAYS install the anti-tip device provided.
- NEVER place a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Tools Required
- Hammer [hammer]
- Screwdriver [screwdriver]
- Drill [drill]
- Ladder [ladder]
Parts and Hardware
The following parts and hardware are used in the assembly. Please refer to the diagrams for visual identification.
- Part 100001: 1x (Screw)
- Part 100214: 21x (Screw)
- Part 10042365: 8x (Dowel)
- Part 10060250: 2x (Drawer slide, right)
- Part 10062514: 7x (Hinge)
- Part 10062514: 2x (Hinge)
- Part 10071303: 7x (Cam lock)
- Part 10093081: 16x (Cam lock)
- Part 10093082: 2x (Cam lock screw)
- Part 10096666: 1x (Drawer slide rail)
- Part 101345: 12x (Dowel)
- Part 103717: 2x (Bracket)
- Part 104663: 4x (Cam lock)
- Part 109041: 2x (Screw)
- Part 118331: 8x (Screw)
- Part 119030: 4x (Cam lock screw)
- Part 119976: 26x (Hinge screw)
- Part 121714: 2x (Washer)
- Part 122971: 2x (Screw)
- Part 145718: 8x (Screw)
- Part 146114: 2x (Screw)
- Part 147968: 2x (Screw for anti-tip)
- Part 150688: 2x (Anti-tip bracket base)
- Part 150689: 8x (Hinge)
- Part 151705: 4x (Screw)
- Part 151706: 4x (Screw)
- Part 153548: 6x (Handle)
- Part 158469: 2x (Wall plug for anti-tip)
- Part 126916: 2x (Screw for anti-tip)
- Part 327495: 2x (Anti-tip bracket)
- Part 10005905: 2x (Anti-tip bracket)
Assembly Steps
Step 1
Attach drawer slides (IKEA CR, IKEA CL) to side panels using screws (146114).
Step 2
Insert dowels (101345) into pre-drilled holes on panels.
Step 3
Attach a panel using screws (122971).
Step 4
Attach another panel using screws (118331).
Step 5
Attach a panel using screws (122971).
Step 6
Connect panels using screws (100214).
Step 7
Insert dowels (101345) and secure panels with screws.
Step 8
Connect panels using screws (100214).
Step 9
Attach brackets (103717) using screws (109041).
Step 10
Insert dowels (101345) into panels.
Step 11
Slide a panel into place.
Step 12
Slide another panel into place.
Step 13
Secure panels with screws (100214).
Step 14
Attach a component using screws (109041).
Step 15
Insert dowels (101345) into panels.
Step 16
Secure panels with screws (100214).
Step 17
Slide a panel into place.
Step 18
Attach panels using screws (151706 and 151705).
Step 19
Insert cam locks (10093081) and cam lock screws (10093082).
Step 20
Attach handles (153548) using screws.
Step 21
Attach hinge bases (150688) to the wardrobe body.
Step 22
Attach hinges (150689) to the doors.
Step 23
Attach panels using screws (118331).
Step 24
Insert dowels.
Step 25
Insert dowels (10042365).
Step 26
Secure panels using screws (118331).
Step 27
Insert cam lock screws (119030).
Step 28
Install anti-tip hardware: attach brackets (10005905) to the wardrobe using screws (147968, 126916) and wall plugs (158469) if needed.
Step 29
Attach a component using dowels (10042365) and screws (146114).
Step 30
Attach a component using screws (146114).
Step 31
Insert cam locks (104663).
Step 32
Insert cam locks (10071303) and attach hinges (10062514).
Step 33
Attach doors using hinge screws (119976).
Step 34
Attach doors using hinges (10062514) and washers (121714).
Step 35
Assemble drawer base using screws (118331).
Step 36
Slide drawer side panels into place.
Step 37
Secure drawer components using cam lock screws (119030).
Step 38
Slide drawer back panel into place.
Step 39
Attach drawer handle support using a hammer and part 10040242.
Step 40
Attach drawer front panel using screws (145718).
Step 41
Insert cam locks (119030).
Step 42
Attach drawer slides (IKEA DL, IKEA DR) to the drawer box using screws (10060250, 146114).
Step 43
Attach drawer front using screws (119976, 10062514).
Step 44
Insert the assembled drawer into the wardrobe.
