HOMCOM 835-539 Tall Kitchen Cabinet Assembly Instructions

Important Information

Please retain these instructions for future reference. Read carefully.

Estimated assembly time: 120 minutes. Number of steps: 21.

Packing Details: Total 2 Boxes

Box-1/2

Box-2/2

Hardware Kit

A x21 (Ø6x35), B x21 (Ø15x10), C x26 (Ø6x30), D x13 (Ø4x40), E x12 (Ø3x12), F x6 (Ø15mm), G x2, H x8, J x6, K x2, M x8, N x48 (Ø3.5x14), O x2, CL x1, CR x1, DL x1, DR x1.

Note: Do not confuse similar screws.

Assembly Steps

Step 1: Drawer Slide Installation

Ensure the exact hole is used for installation to prevent misalignment. The screws on the drawer slide must be leveled to ensure smooth drawer operation.

Diagram Description: Shows parts labeled 8, 9, CL, CR, E, and A being assembled. Part 8 is a side panel. Part 9 is a drawer slide. Screws A and E are used for attachment. CL and CR are also shown as components.

Step 2: Drawer Assembly

Diagram Description: Shows parts labeled 8, 10, 12, 13, B, and C being assembled to form a drawer box. Screws B and C are used.

Step 3: Drawer Assembly Continued

Diagram Description: Similar to Step 2, showing parts 8, 10, 12, 13, 9, B, and C being assembled. Part 9 is a drawer slide.

Step 4: Drawer Assembly with Screws F

Diagram Description: Shows parts 8, 12, 9, 13, and F being assembled. Screw F is used for attachment.

Step 5: Attaching Drawer Slides

Diagram Description: Shows parts 8, 12, 9, and C being assembled. Screw C is used for attachment.

Step 6: Attaching Shelves

Diagram Description: Shows parts 7, 2, and 3 being attached to other components using screws A.

Step 7: Assembling Drawer Sides

Diagram Description: Shows parts 2, 5, and 3 being assembled using screws A, B, and C.

Step 8: Attaching Part 1

Diagram Description: Shows part 1 being attached using screws G and C.

Step 9: Assembling with Screws D and C

Diagram Description: Shows parts 1, 2, and 3 being assembled using screws D and C.

Step 10: Assembling with Screws C and D

Diagram Description: Shows parts 2, 5, 3, and 7 being assembled using screws C and D.

Step 11: Attaching Handles and Drawer Slides

Diagram Description: Shows parts 5, 14, M, N, L, and hardware components being used to attach handles to drawers and drawer slides.

Step 12: Assembling Main Frame

Diagram Description: Shows the main cabinet structure being assembled using parts 8, 12, 9, 13, and B.

Step 13: Attaching Back Panels

Diagram Description: Shows parts 9, 2, 5, 3, and 7 being attached to the main structure using screws 24, 25, and 26.

Step 14: Attaching Side Panels

Diagram Description: Shows parts 1, 3, 7, 9, 20, 21, 22, 23, 24, 25, and 26 being attached. Screws J, E, and D are used.

Step 15: Attaching Top Shelf

Diagram Description: Shows part 11 being attached to the cabinet using hardware H.

Step 16: Attaching Doors

Diagram Description: Shows doors (part 14) being attached to the cabinet using hardware N and M. The buckles have 3 optional adjustment positions.

Step 17: Attaching Shelves

Diagram Description: Shows parts 2, 3, and 4 being placed into the cabinet.

Step 18: Attaching Doors to Cabinet

Diagram Description: Shows doors (part 6) being attached to the cabinet using hardware M and N.

Step 19: Attaching Upper Cabinet Doors

Diagram Description: Shows upper cabinet doors (part 6) being attached using hardware N and M. The buckles have 3 optional adjustment positions.

Step 20: Assembling Base Unit

Diagram Description: Shows parts 15, 16, 17, 18, 19, 20, DL, and DR being assembled using screws A, B, C, D, and E.

Step 21: Wall Mounting (Anti-Dumping Belt)

This is an anti-dumping belt that fixes the product to the wall. It can be used or not, depending on your needs. If it is a solid wall, use expansion and self-tapping screws. If it is a wooden wall, use only self-tapping screws and do not overtighten.

Diagram Description: Shows the anti-dumping belt (K) being attached to the wall and the cabinet using screws.

Step 22: Final Check

Be careful to push in the board when both sides slide way have been aligned.