Lowrance EAGLE 4x Installation and Mounting Guide
In the box
- A Eagle 4x display unit
- B Gimbal kit
- C Bullet skimmer transducer
- D Cable lock collar
- E Fuse and fuse holder
- F Documentation pack
Gimbal Mounting
Follow these steps for gimbal mounting:
- Attach the gimbal bracket to the mounting surface using screws.
- Connect the gimbal unit to the bracket.
- Attach the Eagle 4x display unit to the gimbal unit.
- The display unit is now attached to the gimbal, with pilot holes indicated for mounting.
- Secure the display unit by engaging the locking mechanism.
Recommended pilot holes
For soft/hard materials: Ø 3.8 - 4.8 mm (3/16")
Safety Warning
⚠️ Always wear appropriate eyewear, ear protection, and dust mask when drilling, cutting, or sanding. Remember to check the reverse side of all surfaces whenever drilling or cutting.
Panel Mounting
Follow these steps for panel mounting:
- Cut a suitable opening in the panel and insert the mounting bracket.
- Attach the gimbal unit to the panel bracket.
- Attach the Eagle 4x display unit to the gimbal unit.
Wiring
Connect the power cable to the display unit. The cable includes a fuse holder and a connector for the unit. Connect the other end of the cable to a 12V DC power source, observing correct polarity ([positive terminal] and [negative terminal]).
Cable lock collar
Use the cable lock collar to secure the cable connection to the display unit. Ensure the collar is properly locked.
Dimensions
Front View: Width: 97.6 mm (3.84"), Height: 185.5 mm (7.30")
Side View: Depth at base: 93.0 mm (3.66"), Overall Depth: 101.6 mm (4.00"), Width at top: 116.0 mm (4.57"), Depth at top: 19.9 mm (0.78")
Technical Specifications
| Specification | Value |
|---|---|
| Display Resolution | 272 x 480 |
| Viewing angles | 80° top/bottom/left/right |
| Supply voltage | 12 V DC (10.4 - 17 V DC) |
| Power consumption (max) | 2.34 W (195 mA at 12 V DC) |
| Recommended fuse rating | 3 A |
| Interface/connectivity | 1 port (bullet skimmer transducer compatible) |
| Operating temperature | -15°C to 55°C (5°F to 131°F) |
| Storage temperature | -20°C to 60°C (4°F to 140°F) |
| Waterproof rating | IPX7 |
| Weight (display only) | 0.28 kg (0.624 lb) |
| Mounting type | Panel mount or gimbal mount |
Accessories
The following accessories are sold separately and available from your local retailer:
- Suncover (SKU: 000-16248-001)
- Dash gasket kit (SKU: 000-16252-001)
Trademarks and Legal Information
®Reg. U.S. Pat. & Tm. Off, and ™ common law marks.
Visit www.navico.com/intellectual-property to review the global trademark rights and accreditations for Navico Group and other entities.
Navico® is a trademark of Navico Group.
Lowrance® is a trademark of Navico Group.
EAGLE® is a trademark of Navico Group.
©2024 Navico Group. All Rights Reserved. Navico Group is a division of Brunswick Corporation.
For more information, visit www.lowrance.com.
Mounting Template Instructions
Important: Do not resize this mounting template if printing. The template is provided at a 1:1 scale (A3 size: 420 mm x 297 mm / 16.54" x 11.69").
The template includes dimensions for the unit and mounting points, as well as maximum dash curve specifications. It also lists optional accessories like the Suncover and Dash gasket kit with their respective SKUs.
For dealer locator information, visit www.lowrance.com/dealer-locator.
