DEPSTECH DS630 Industrial Endoscope User Manual

Product Features

DEPSTECH is a technology company specializing in endoscopes, aiming to improve work efficiency. The DS630 is a high-performance steerable industrial endoscope featuring a 5-inch IPS HD display. It can record video, capture photos, and save them to a TF memory card (Micro-SD). The camera utilizes a high-performance CMOS chip and Bluart 3.0 technology for high frame rates and clear images, making it suitable for industrial maintenance, equipment maintenance, mechanical maintenance, and design fields.

Special Warnings

• [Warning Icon] This product is an industrial endoscope camera, not for medical or physical examination.
• To extend battery life, charge the battery every 3 months, regardless of use.
• Do not replace the internal battery yourself, as unprofessional operation may lead to overheating and personal injury.

Safety and Protection

• The camera probe is a high-precision electronic device. Avoid touching or pulling the cable to prevent device failure.
• The camera probe has an IP67 waterproof layer, but the main body is not waterproof. Be cautious to prevent scratches when using the probe.
• The camera probe is not resistant to high temperatures. Ensure equipment is cooled down before inspection to prevent damage.
• The exposed metal parts are conductive. Avoid contact with live circuits.
• If the equipment is damaged, do not disassemble it yourself. Contact the seller or supplier for professional repair.
• Children should not use the device independently without adult guidance.

Operating and Storage Environment

• Operate at an ambient temperature of 32~113°F (0~45°C).
• Store in a dry, clean, oil-free, water-free environment, free from chemical liquids.

General Warnings

• Read and follow instructions carefully before use to avoid injury.
• Disassembly of this product is strictly prohibited. Unauthorized disassembly voids liability for any damage.
• The main body of the product is not waterproof; avoid contact with liquids.
• Do not overbend the camera probe; the bending limit of the snake tube is one cycle.
• Do not twist or pull the camera probe at the front of the snake tube.
• Before pulling out the snake tube, ensure the steering wheel is centered and do not turn it violently.

Product Introduction

This section details the components and controls of the DEPSTECH DS630 endoscope.

Front View of the Product

Illustration shows the main unit with a screen and several buttons.

• 1. Power button / Lens light adjustment button (composite button): Press and hold for 2 seconds to turn the endoscope on/off. Click to adjust the lens light after powering on.
• 2. Photo/Video button: Click to take a photo. Hold for 2 seconds to start recording video, and click again to end recording.
• 3. Charging indicator: A red LED flashes during charging and remains solid when fully charged.
• 4. Steering wheel: Slide the steering wheel up and down to change the camera angle accordingly.
• 5. Menu button: Click to enter the menu interface.
• 6. Image zoom-in button: Click on the image in the preview interface to zoom in. In the menu interface, it moves the cursor up.
• 7. OK button: Press and hold for 2 seconds to enter the album. In the menu interface, it confirms selections.
• 8. Image zoom-out button: Click on the image in the preview interface to zoom out. In the menu interface, it moves the cursor down.
• 9. Image rotation button: Click to rotate the live image 180° in the preview interface. Click to return to the previous level in the menu interface.

Screen Side View

Illustration shows ports and buttons on the side of the screen unit.

• 10. Type-C charging port: Used for charging via a Type-C cable connected to an adapter. Also used for data transmission by connecting the Type-C cable to a PC client.
• 11. TF card slot: Supports a TF card with a maximum of 32 GB. Please format the TF card before using it for the first time.
• 12. Reset button: Pressing this button will shut down the device.

Introduction to UI Icons

Understanding the icons displayed on the endoscope's screen.

Preview Interface

Illustration shows a close-up of gears with various icons and indicators.

• Photo Shoot/Video Record: [Camera Icon]
• Probe temperature: Displays current probe temperature (e.g., 45°C).
• Battery level: [Battery Icon] indicator.
• TF Card Status: [SD Card Icon] indicator.
• Screen Rotation 180°: [Rotate Icon] indicator.
• Timestamp: Displays date and time (e.g., 2023/04/20 15:23:50).

Attention: If the camera probe operating temperature or ambient temperature reaches 80°C, the device will automatically shut down due to high temperature protection. Only the camera probe part is waterproof.

Album Interface

Illustration shows a similar gear image in the album view with different information.

• File number: Indicates the current file number out of the total (e.g., 1/10).
• Photography date: Displays the date and time of capture (e.g., 2022/12/26 12:23:53).
• Current playback duration / Total video duration: Shows video playback progress (e.g., 00:00/00:09).
• Resolution: Displays image or video resolution (e.g., 1920x1080).
• File Size: Displays the size of the file (e.g., 13.8MB).

Operations

Language Settings

The default language is English. To switch languages:

1. Click the [Menu Button] to enter the menu. Select "Language" using the [Up/Down Arrow Buttons], then press [OK Button] to select the desired language.
2. Click the [Up/Down Arrow Buttons] to select the desired language, then click [OK Button] to confirm.
3. Click the [Menu Button] to return to the image preview interface.

Photo/Video

• Click the [Photo/Video Button] to take a photo.
• Press and hold the [Photo/Video Button] to start recording video, and click again to end recording.

View Photo/Video

1. In the preview interface, press and hold the [OK Button] for 2 seconds to enter the album.
2. Click the [Up/Down Arrow Buttons] to view a photo or video, then click [OK Button] to view the photo or play the video.
3. Click the [Menu Button] to return to the previous level and exit the album.

Delete Photos/Videos

1. When viewing photos/videos, press the [Photo/Video Button] to access the photo/video details interface.
2. Click the [Up/Down Arrow Buttons] to select "Delete the current file" or "Delete all files".
3. Click [OK Button] to confirm deletion.
4. Click the [Menu Button] to return to the previous level or the preview interface.

TF Card Formatting

1. In the preview interface, press the [Menu Button] to enter the menu.
2. Click the [Up/Down Arrow Buttons] to select the "Format" option and press [OK Button] to enter the options interface.
3. Select the "OK" option and press [OK Button] to confirm.
4. Wait for the formatting to complete, then press the [Checkmark Button] to return to the preview interface.

Copy Photos and Videos to Your Computer

Two methods are available:

1. Copy files directly using a TF card: Insert the TF card into a card reader and connect it to your computer. (Illustration: TF card inserted into a card reader connected to a laptop.)
2. Use Type-C data cable to connect and transfer data:
   1. Connect the product to your computer with a Type-C cable.
   2. Select the data transfer mode and press [OK Button] to confirm. You can then copy photos and videos to your computer. (Illustration: Endoscope connected via Type-C cable to a laptop.)
   3. When the Type-C cable is unplugged, the device will automatically exit data transfer mode and return to the image preview interface.

Recharging

1. Connect the device to a DC 5V adapter for charging.
2. When charging, the red indicator light flashes. When fully charged, the indicator light turns solid.

Specifications

Technical details of the DEPSTECH DS630 endoscope.

Packing List

• Endoscope (32G TF card inserted) - Illustration: DEPSTECH endoscope unit with flexible cable.
• Type-C Charging Cable - Illustration: USB Type-C cable.
• User Manual - Illustration: Open booklet.

Compliance and Regulatory Information

This section outlines the regulatory compliance for the DEPSTECH DS630.

• FCC Requirement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. The equipment has been tested and found to comply with Class B digital device limits. Measures to correct interference are provided.
• CE Compliance: Complies with EN 60065 standard, ensuring safety from electric shock, high temperature, radiation, explosion, mechanical harm, fire hazard, and chemical burns.
• EU Conformity Statement: Marked with "CE", complying with harmonized European standards under EMC Directive 2014/35/EU and RoHS Directive 2011/65/EU.
• WEEE Notice (2012/19/EU): Products marked with the WEEE symbol should not be disposed of as municipal waste. Return to local supplier or designated collection points for recycling. More info: www.recyclethis.info.
• Battery Directive (2013/56/EU): Contains a battery that cannot be disposed of as unsorted municipal waste. Refer to product documentation for battery information. Recycling instructions are provided. More info: www.recyclethis.info.

EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main

UK REP: DST Co.,Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

Customer Services

For any questions or inquiries, DEPSTECH encourages you to reach out.

• Website: www.depstech.com
• Email: support@depstech.com
• Facebook Official Page: @DEPSTECH. FANS

Company Address: Shenzhen Deepsea Innovation Technology Co., Ltd. Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN

Made in China

Version: V01.23.04