DEPSTECH DS550 Industrial Endoscope

Product Features

• DEPSTECH is a technology company specializing in endoscopes.
• The DS550 is a high-performance industrial endoscope with a 5" IPS LCD Screen.
• It features camera and video functions, saving to a TF memory card (Micro-SD).
• Uses a high-performance CMOS chip with Bluart 2.0 technology for clear images.
• Suitable for industrial maintenance, appliance maintenance, mechanical maintenance & design.

Special Warning and Notice

• This product is an industrial endoscope camera, not for medical or physical examination.
• To lengthen battery life, charge the device every 3 months.
• Do not attempt to replace the internal battery yourself due to risks of personal injury from overheating.

Safety and Protection

• The probe is a high-precision electronic device; avoid hitting or pulling cables to prevent failure.
• The probe has an IP67 waterproof layer; use with care and protect from scratches.
• The probe materials are not high-temperature resistant; ensure equipment is cooled before examination to prevent damage.
• If the device is damaged, do not dismantle it; contact the seller or supplier for professional maintenance.
• Children should use the device only under adult guidance.

Operating and Storage Environments

• Operate the device at ambient temperatures between 32-113°F (0-45°C).
• Store the device in a dry, clean, oil-free, and waterless place, away from chemical liquids.

Product Introduction

Button Functions:

• Button 1: Press and hold for 2 seconds to power on/off the endoscope (⚡).
• Button 2: Single press to take a photo (?); press and hold to start video recording, single press to end recording (▶️).
• Button 3: Single press to switch lenses (?).
• Button 4: When previewing, single press to rotate the image 180°; acts as a return function in menus (↩️).
• Button 5: Click to enter the setting menu (⚙️).
• Button 6: Click to brighten LED lights of the camera (⬆️); moves cursor up in menus.
• Button 7: Click to dim LED lights of the camera (⬇️); moves cursor down in menus.
• Button 8: Press and hold for 2 seconds to enter the album; confirms choices in menus (▶️||).
• Button 9: Click to turn the fill light on/off (?).

Ports and UI Introduction

Device Ports and Indicators:

• 10. Charging Status LED Indicator: Red LED flashes during charging; stays solid red when charging is finished.
• 11. TF Card Slot: Supports up to 32GB TF cards. Format the card before first use.
• 12. Type-C Charging Port: Used for charging via adapter and for data transmission to a PC.
• 13. Reset Button: Short press to shut down the device.

UI Elements:

• Photo Shoot/Video Record
• TF Card Status
• Screen Rotation 180°
• Lens Indicators: A (Main Lens), B (Side Lens B), C (Side Lens C).

Lens Configuration Tips:

• Dual Lens: A: Main Lens, B: Side Lens
• Three Lens: A: Main Lens, B: Side Lens (B), C: Side Lens (C)

Language Setting

The default language is English. To change the language:

1. Click the [Settings] button (⚙️) to enter the menu. Select 'Language' using the Up/Down arrow buttons (⬆️/⬇️) and press the OK button (▶️||).
2. Use the Up/Down arrow buttons (⬆️/⬇️) to select the desired language and press the OK button (▶️||) to confirm.

Photo/Video Operations:

Take photos by pressing the [Photo] button (?). Long press to start video recording, single press to end recording.

Photo/Video Management

View Photo/Video:

1. In preview mode, press and hold the [Album] button (▶️||) to enter the photo album.
2. Press the Up/Down arrow buttons (⬆️/⬇️) to browse photos; press the OK button (▶️||) to play videos.
3. Press the [Return] button (↩️) to exit the photo album.

Delete Photos/Videos:

1. When viewing photos/videos, press the [Settings] button (⚙️) to enter the photo/video detail page.
2. Press the Up/Down arrow buttons (⬆️/⬇️) to select the file(s) to delete (current file or all files).

Lens Switching and TF Card Formatting

Lens Switching:

When the product is on, press the [Switch Lens] button (?) to cycle through the lenses.

TF Card Formatting:

1. From the preview interface, press the [Settings] button (⚙️) to access the menu.
2. Use the Up/Down arrow buttons (⬆️/⬇️) to select the "Format" option.
3. Press the OK button (▶️||) to enter the option interface and select "OK".
4. Wait for the formatting process to complete successfully.

Data Transfer, Charging, and Installation

Copy Photo and Video Files to Computer:

1. Use a TF card reader to copy data directly from the TF card.
2. Alternatively, connect the device to a computer using a Type-C cable:
   1. Connect the product to your computer.
   2. Press the [Settings] button (⚙️) to enter the menu.
   3. Select "Data transmission".
   4. Press the OK button (▶️||) to start copying files.

Note: If the device is not connected, select "Data transmission" on the setup interface; a USB icon will appear. Press the [Return] button (↩️) to exit. It is normal for "No Signal" to appear when exiting data transmission.

Charging Instructions:

1. Connect the device to a DC 5V adapter for charging.
2. The red indicator light flashes while charging and remains solid when fully charged.

Guide for Accessories Installation:

Installation Method: Turn counterclockwise to remove the protective cap. Turn clockwise to tighten accessories.

Specifications

Packing List:

• Endoscope (32G TF card inserted)
• User Manual
• Type-C Charging Cable
• Accessories (Hook + Magnet)

Compliance Information

FCC Requirement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try correcting it by: reorienting or relocating the receiving antenna; increasing the separation between the equipment and receiver; connecting the equipment to an outlet on a different circuit; or consulting a dealer or experienced radio/TV technician.

CE Compliance:

This device complies with EN 60065 standard, ensuring it does not harm the user or products regarding electric shock, high temperature, radiation, explosion, mechanical harm, fire hazard, or chemical burns.

EU Conformity Statement:

This product and its accessories are marked with "CE" and comply with harmonized European standards under the EMC Directive 2004/108/EC, RoHS Directive 2011/65/EU, and Amendment (EU) 2015/863.

WEEE Notice:

Products marked with the WEEE symbol cannot be disposed of as unsorted municipal waste. Return for recycling to your local supplier or designated collection points. More info: www.recyclethis.info

Battery Directive (2013/56/EU):

This product contains a battery that cannot be disposed of as unsorted municipal waste. Return the battery to your supplier or a designated collection point for recycling. The battery may be marked with symbols indicating cadmium (Cd), lead (Pb), or mercury (Hg). More info: www.recycle-this.info

European Representatives:

EC REP 1: Like Sun GmbH, Planckstr.59, 45147 Essen, Germany

EC REP 2: DST Co., Ltd., Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

Customer Services

For any questions, please contact DEPSTECH:

Website: www.depstech.com

Email: support@depstech.com

Facebook: DEPSTECH. FANS

Company Information:

Shenzhen Deepsea Innovation Technology Co., Ltd.

Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN

Made in China