Safavieh Lecarlo Mirrored Wood Sideboard
Product Dimensions: 72" W x 19" D x 34" H
Notice
Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance.
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
This item may require periodic tightening.
If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (not included): Phillips head screwdriver
Care and Maintenance
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | SIDEBOARD | Image of a sideboard | 1X |
| B | LEGS | Image of furniture legs | 6X |
| C | CENTER LEG | Image of a center leg | 1X |
| HW1 | ANTI TIP KIT | Image of an anti-tip kit | 1X |
| HW2 | KNOB | Image of a knob | 4X |
| HW3 | SMALL BOLT | Image of a small bolt | 4X |
Warnings
[warning] Weight capacity: 275lbs
WARNING: DO NOT STAND ON SIDEBOARD
WARNING: DO NOT OVER TORQUE BOLTS
Assembly Instructions
Step 1: Attach Legs
Attach legs (B) and center leg (C) to the sideboard (A).
Diagram shows sideboard (A) with holes for legs (B) and center leg (C). Six legs (B) and one center leg (C) are shown with quantities.
Step 2: Attach Knobs and Anti-Tip Kit
Attach knobs (HW2) to the server doors using small bolts (HW3). Attach the anti-tip kit (HW1) to the sideboard and the wall.
Diagram shows the back of the sideboard doors with knobs (HW2) being attached with small bolts (HW3). Another diagram shows the anti-tip kit (HW1) being secured to the sideboard and a wall. An inset shows the tip-over restraint installation with hardware labeled 'Not provided' and HW3, HW2.
PLEASE NOTE: To help prevent the possibility of tip-over, install the tipover restraint provided.
Diagram shows the sideboard with an anti-tip kit (HW1) attached to the back and secured to a wall. An inset shows hardware for the anti-tip kit. Another diagram shows the sideboard with adjustable levelers at the bottom.
