Piscifun AtlantiX Electric Fishing Reel

Introduction

Thank you for choosing Piscifun electric fishing reels. This manual provides detailed instructions on the operation, maintenance, and care of your AtlantiX electric fishing reel to ensure optimal performance and longevity.

Names and Functions of Main Parts

• Speed-control switch: Freely controls the take-up speed of the fishing reel. Push forward to increase speed, return to OFF to decrease.
• Star drag: Adjusts drag power. Should be adjusted before fishing to manage spool rotation and prevent line release.
• Cast control knob: Prevents the spool from rotating too fast during reeling out, avoiding line knotting.
• Clutch button: Press to allow the spool to rotate freely (reel-out state). Rotate the handle to engage the take-up state.
• Line guide: Arranges the fishing line evenly on the spool.

Note: Do not lock the star drag to better protect the electric fishing reel.

Power Supply and Connection

This electric fishing reel operates on a 12V DC power supply. Ensure the battery voltage is within the specified range (DC 12-16.8V).

Connecting to Power:

1. Clamp the red clip of the power line to the positive pole (+) and the black clip to the negative pole (-) of the battery.
2. Insert the other end of the power line into the electric fishing reel's socket and lock with the nut.
3. Alternatively, directly insert a lithium battery into the socket and lock with nuts.

Warning: Reversed connection of power poles will activate protection and prevent startup. Do not use power supplies outside the specified voltage range.

Operation Guide

Starting Up:

After connecting the power supply, the reel enters self-check mode and then the reel-out mode.

Function Setting:

1. Press and hold the "MENU" and "RESET" keys for 3 seconds to enter the function setting interface.
2. Use the speed-control switch to navigate the menu. Press "RESET" to select a function.
3. Press and hold the "PICK UP" key to return to the reel-out mode.

Key Functions:

• PICK UP (Instantaneous movement key/return key): Initiates instantaneous movement, stops take-up when used with the speed-control switch, and returns to the previous menu.
• MENU: Accesses the menu.
• RESET (Clear key/Confirm key): Clears data, confirms selections, and corrects broken line length.
• Speed class: Displays and controls the rotation speed (0-Hi).
• Electric power display: Shows battery life.
• Reel-out length: Indicates the length of fishing line released or water depth.

Line Input:

1. Thread the fishing line through the line guide and tie it to the spool's binding post. Ensure the line is not knotted.
2. Access the "Line Input" menu by pressing "MENU" and "RESET" simultaneously. Select "When line length is known" or "Backing line".
3. Follow on-screen prompts for setting the line length or backing line.

Auto Stop:

Allows setting a specific length for automatic stopping during take-up. The reel can be set to stop automatically at a designated length, pause, and repeat the cycle.

Pickup/Jigging:

• OFF: Pickup button is invalid; use only the speed-control switch or handle.
• Pickup: Press and hold the "PICK UP" key for automatic winding. Press again to stop. Speed is adjustable.
• Jigging: The reel automatically stops for a set duration after reaching a specified reel-out length before continuing to kink.

Broken Line Correction:

If the line breaks, this function ensures accurate reeling. Take up the broken line, and use the "RESET" key to correct the kinking length.

Maintenance

Electric Fishing Reel Maintenance:

1. Clean with a soft sponge and neutral detergent.
2. Rinse with tap water, especially parts with fishing line.
3. Dry in a cool place.

Note: Do not clean with seawater, gasoline, or organic solvents. Avoid prolonged soaking or using brushes that may scratch the body.

Power Line Maintenance:

1. Wipe dirt with a soft cloth and tap water or warm water. Ensure no damage.
2. Inject lubricating oil into the joint after drying.
3. Store properly after pulling out.

Warning: Do not use the powerline to lift the reel, flush it with water, place heavy objects on it, or wind it onto the reel after insertion.

Fault Cause and Troubleshooting

Note: If the system fails to work properly after troubleshooting, contact customer service.

Precautions

• Do not put fingers between the line guide and body.
• Adult supervision is required for children.
• Store out of reach of children.
• Use only the specified power supply voltage.
• Be aware of potential interference with medical devices. Consult a doctor if you have implanted medical devices.
• Do not touch moving parts while the reel is operating.
• If water drops are found on the LCD screen, stop use and repair immediately.
• Cut off power immediately if the motor operates abnormally.
• Turn the speed-control switch to OFF before setting the drag.
• Do not hold the fishing line with hands during take-up or pay-off.
• Ensure power is off and unplugged before maintenance.
• Wipe seawater from the plug before use if connected to a ship's power supply.
• If the fishing rig is stuck, pull it off by hand, preferably with gloves.
• Loosen the star drag before plugging in the power supply.
• Do not use the electric fishing reel for purposes other than fishing.
• Avoid touching peeling surfaces (spray paint, electroplating).
• Stop use and unplug if a burning smell is detected.
• Be careful of lubricating oil on rotating parts.
• Do not disassemble or modify the reel.
• Do not modify the power line.
• Do not hit or apply heavy pressure to the reel.
• Do not place the product near heaters.
• Store in a ventilated place after drying completely if not used for a long time. Loosen the star drag.
• Do not touch gaps with metal products.
• Rinse the fishing line with tap water and dry in a cool place before storage.
• Check the reel before going to sea to ensure normal operation.

Product Parameters

Return & Warranty Policy

Warranty Period:

• Free Return/Exchange: Within 1 month (unused items or quality issues).
• Free Warranty: Within 1 year.
• Paid Warranty: Up to 3 years.

The warranty covers manufacturing defects but excludes damage from improper use, accidents, or human error. Retain your purchase receipt for service.

After-Sales Service Process:

1. Contact Customer Service: Provide order details via website, hotline, or chat.
2. Diagnosis: Initial diagnosis will be conducted. Return may be required for detailed inspection.
3. Repair Confirmation: Notification of repair plan and costs (if applicable).
4. Repair Implementation: Repair completion upon approval.
5. Service Tracking: Monitor repair progress.

Order Cancellations: Orders can be canceled within 24 hours of placement.

For any issues, please contact Piscifun customer service at cs@piscifun.com.

Exploded View and Parts List

The document includes a detailed exploded view diagram and a comprehensive parts list with corresponding part numbers and names for the Piscifun AtlantiX electric fishing reel.

Example Parts:

• 101: Frame
• 102: Front cover
• 105: Screw
• 106: Ball bearing
• 107: Pinion gear
• 123: Main gear
• 135: Star drag
• 149: Speed-control switch
• 201: Clutch lever assembly
• 302: Spool assembly
• 502: Motor assembly
• 601: Digital display assembly
• 702: Handle assembly
• 901: Power line

A complete list of parts is available within the original document.