Assembly Instructions
B850-EKB Eastern King Bed
Model: B850-EKB EASTERN KING (4+8)
Box 1: Headboard & Footboard Components
- A: Headboard - 1 pc
- B: Footboard - 1 pc
- C: Headboard Leg - 2 pcs
- D: Bed Slats - 4 pcs
- E: Bed Slats Support - 8 pcs
- F: Side Rail - 2 pcs
Box 1: Hardware List
- 1: JCBC Bolt M6 x 40mm - 4 pcs
- 2: Spring Washer 1/4" Blk - 4 pcs
- 3: Flat Washer 1/4"ID x 13mmOD Blk - 4 pcs
- 4: Allen Key m4x65mm Blk - 1 pc
- 5: Allen Key m5x65mm Blk - 1 pc
- 6: Csk Screw m4 x 32mm Rbw - 16 pcs
Step 1.1: Attach Head Board Leg
Attach Head Board Leg (C) to Head Board (A) using JCBC Bolt (1), Spring Washer (2), Flat Washer (3), and secure with Allen Key (4).
Step 1.2: Fix Other Holes
Fix the remaining holes with Csk Screw (6).
Step 2: Attach Side Rails
Hook Side Rail (F) to Head Board (A) and push down to fit. Repeat for the other end of the rail to hook onto the Footboard (B).
Step 3.1: Tighten Corners
Tighten the 4 corners using Allen Key (5).
Step 3.2: Attach Bed Slat Support
Fix the Bed Slat Support Leg (E) to the Bed Slat (D) as shown.
Step 3.3: Install Bed Slats
Install the bed slats (D) to the Side Rail (F) and tighten with Csk Screw (6) using a screwdriver. Ensure the setup is done at the decided location for perfect stability.
Complete Assembly
Note: Periodically tighten screws as they may become loose with use. Check the tightness of all screws every 6-8 weeks.
B850-N Night Stand
Model: B850-N NIGHT STAND
Box 1: Night Stand Components
- A: Night Stand - 1 pc
- B: Bun Foot - 4 pcs
Box 1: Hardware List
- 1: JCBC Bolt m6x50mm Blk - 4 pcs
- 2: Spring Washer 1/4" Blk - 4 pcs
- 3: Flat Washer 1/4"ID x 13mmOD Blk - 4 pcs
- 4: Allen Key m4x110mm With Ball Blk - 1 pc
Step 1: Assemble Bun Feet
Open the bottom drawer and take out the Bun Foot carton (B). Assemble the Bun Foot (B) with JCBC Bolt (1), Spring Washer (2), Flat Washer (3), and secure with Allen Key (4). For ease of installation, flip the Night Stand over onto a soft surface.
Completed Assembly
Note: Periodically tighten screws as they may become loose with use. Check the tightness of all screws every 6-8 weeks.
