55" TV Stand
Item: TS-230502
Assembly Instructions
NOTE: This instruction manual contains IMPORTANT safety information. Please read carefully before assembling the product.
IMPORTANT SAFETY INFORMATION
WARNING: DEATH OR SERIOUS INJURY MAY OCCUR WHEN CHILDREN CLIMB ON AUDIO AND/OR VIDEO EQUIPMENT FURNITURE. A REMOTE CONTROL OR TOYS PLACED ON THE FURNISHING MAY ENCOURAGE A CHILD TO CLIMB ON THE FURNISHING AND AS A RESULT THE FURNISHING MAY TIP OVER ONTO THE CHILD.
WARNING: RELOCATING AUDIO AND/OR VIDEO EQUIPMENT TO FURNITURE NOT SPECIFICALLY DESIGNED TO SUPPORT AUDIO AND/OR VIDEO EQUIPMENT MAY RESULT IN DEATH OR SERIOUS INJURY DUE TO THE FURNISHING COLLAPSING OR OVER TURNING ONTO A CHILD.
USE AND CARE
- To clean, use a soft cloth slightly dampened with water.
- Do not use abrasive cleaners or spray liquids.
- Using solvents of any kind on your furniture may damage your furniture's finish.
- Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
- Stains or marks from crayons or ink markers will be difficult to remove.
- Do not climb or step on the stand.
- Periodically check that all fasteners are tightened.
Maximum Weight Capacity
MAXIMUM WEIGHT: 75 LBS (34 KG)
Parts / Components List
| Label | Description | Quantity |
|---|---|---|
| A | Top panel | 1 |
| B | Support rail | 1 |
| C | Sliding rail | 1 |
| D | Side back panel | 4 |
| E | Middle back panel | 2 |
| F | Left side panel | 1 |
| G | Left front panel | 1 |
| H | Side shelves | 4 |
| I | Center shelf | 2 |
| J | Front rail | 2 |
| K | Left partition board | 1 |
| L | Right partition board | 1 |
| M | Right side panel | 1 |
| N | Right front panel | 1 |
| O | Bottom panel | 1 |
| P | Back side base panel | 1 |
| Q | Left side base panel | 1 |
| R | Right side base panel | 1 |
| S | Front side base panel | 1 |
| T | Left door | 1 |
| U | Right door | 1 |
HARDWARE
- AA: Screw (x40)
- BB: Cam lock (x40)
- CC: Dowel (x36)
- DD: L-bracket (x2)
- EE: Nail (x6)
- FF: Screw Ø3.5*15mm (x14)
- GG: Screw Ø4*50mm (x10)
- HH: Screw Ø4*12mm (x4)
- II: Screw M4 x 22mm (x4)
- JJ: Handle (x2)
- KK: Shelf support (x24)
- LL: Bracket (x10)
- MM: Spring (x4)
- NN: Spring (x8)
- OO: Hinge part (x2)
- PP: Hinge part (x4)
- QQ: Cap (x4)
- RR: Washer Ø 16*1.5mm (x8)
- SS: Sliding door mechanism (x2)
- TT: Cable management clip (x1)
- UU: Nail (x6)
Assembly Steps
- Attach panels Q, R, and S using screws AA.
- Attach panels P and S to panels Q and R using screws AA and cam locks BB.
- Attach panel O to the assembled base using screws AA.
- Connect the side base panels (Q, R) and front base panel (S) to the bottom panel (O) using cam locks BB.
- Insert dowels CC into panels K and L.
- Attach panels K and L to the front rail (S) using screws GG.
- Attach support rail B using hinge parts OO, screws HH, and screws AA.
- Attach side panels K to the base assembly using cam locks BB.
- Attach panel F to panel G using screws AA and dowels CC.
- Attach panel G to panel F using cam locks BB.
- Attach panel M to panel N using screws AA and dowels CC.
- Attach panel N to panel M using cam locks BB.
- Attach panels F and M to the base structure using screws GG and nails UU.
- Install sliding rails C using screws HH and springs MM.
- Assemble doors T and U with handles JJ, washers RR, caps QQ, springs NN, hinge parts PP, and screws II.
- Attach doors T and U to the sliding rails C.
- Attach center shelves I to the side panels using screws AA and dowels CC.
- Attach the second set of center shelves I to the side panels using cam locks BB.
- Insert shelf supports KK into the side panels and place side shelves H onto the supports.
- Attach back panels D and E to the rear of the unit using sliding door mechanisms SS and screws FF.
- Secure the back panels with brackets LL and screws FF.
- Attach the top panel A using screws AA.
- Secure the top panel A using cam locks BB.
- Attach the final decorative elements using screws DD and EE.
- Attach the cable management clip TT.
