Assembly Instructions

Important Information

WARNING!

Maximum Load: 220 lb/100kg

Maximum Load (smaller shelves/parts): 20 lb/9.1kg

Estimated Time for Assembly: 45 minutes

Assembly the furniture on empty carton, carpet, or rug to prevent scratches or damage.

This furniture requires 2 people to assemble. Make sure no parts are missing or damaged before assembly.

Board Identification

(Diagrams showing individual boards with numbers and quantities are not included in this text-based representation but would typically be present here.)

Board 1: x1

Board 2: x1

Board 3: x2

Board 4: x2

Board 5: x1

Board 6: x1

Board 7: x2

Board 8: x2

Board 9: x2

Board 10: x2

Board 11: x1

Board 12: x1

Board 13: x1

Board 14: x1

Board 15: x1

Board 16: x1

Board 17: x1

Board 18: x2

Board 19: x1

Board 20: x2

Package Content

(An exploded view diagram showing how all parts fit together would be here.)

Hardware Part List

Cam Lock Fastening System

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

(Diagrams illustrating the 4 steps of the cam lock system are not included in this text-based representation.)

Assembly Steps

STEP 1

(Diagram showing the attachment of hardware 'A' to board '19'.)

Attach 8x hardware 'A' (Φ6*35) to board '19'.

STEP 2

(Diagrams showing the attachment of hardware 'C' and 'M' to boards '9' and '8'.)

Attach 20x hardware 'C' (Φ6*30) to board '9' (x2).

Attach 2x hardware 'M' (Φ8*40) to board '8' (x2) and board '16'.

STEP 3

(Diagrams showing the attachment of hardware 'A' and 'B' to boards '15', '9', and '14'.)

Attach 4x hardware 'A' (Φ6*35) to boards '15' (x2).

Attach 4x hardware 'B' (Φ15*9.5) to boards '9' (x2) and '14' (x2).

STEP 4

(Diagram showing the attachment of hardware 'B' to boards '9', '15', and '19'.)

Attach 2x hardware 'B' (Φ15*9.5) to board '9' and board '15'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 5

(Diagram showing the attachment of board '16' to board '9' and '15'.)

Attach board '16' to board '9' and board '15'. Note the orientation of small holes in top.

STEP 6

(Diagram showing the attachment of hardware 'B' to boards '9', '14', and '15'.)

Attach 2x hardware 'B' (Φ15*9.5) to board '9' and board '14'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 7

(Diagram showing the attachment of hardware 'M' to boards '11', '12', and '13'.)

Attach 4x hardware 'M' (Φ8*40) to boards '11', '12', and '13'.

STEP 8

(Diagram showing the attachment of hardware 'H' to boards '12' and '15'.)

Attach 6x hardware 'H' (Φ4*25) to boards '12' and '15'.

STEP 9

(Diagrams showing the attachment of hardware 'E' and '10' to boards '9'.)

Attach 4x hardware 'E' (Φ4*35) to board '9' (x2).

Attach 4x hardware '10' to board '9' (x2).

STEP 10

(Diagram showing the attachment of hardware 'B' to boards '8' and '10'.)

Attach 2x hardware 'B' (Φ15*9.5) to boards '8' and '10'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 11

(Diagram showing the attachment of hardware 'B' to boards '8' and '10'.)

Attach 2x hardware 'B' (Φ15*9.5) to boards '8' and '10'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 12

(Diagrams showing the attachment of hardware 'A', 'G', and 'K' to board '2'.)

Attach 16x hardware 'A' (Φ6*35) to board '2'.

Attach 4x hardware 'G' (Φ3.5*12) and 2x hardware 'K' (30*16*10) to board '2'.

Flip the assembly.

STEP 13

(Diagram showing the attachment of hardware 'B' to boards '2', '9', and '8'.)

Attach 8x hardware 'B' (Φ15*9.5) to boards '2', '9', and '8'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 14

(Diagrams showing the attachment of hardware 'B' and 'C' to boards '7' and '2'.)

Attach 2x hardware 'B' (Φ15*9.5) and 4x hardware 'C' (Φ6*30) to boards '7' and '2'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 15

(Diagrams showing the attachment of hardware 'A' and 'C' to boards '5', '6', and '3'.)

Attach 2x hardware 'A' (Φ6*35) to board '5'.

Attach 12x hardware 'C' (Φ6*30) to boards '6' and '3' (x2).

STEP 16

(Diagrams showing the attachment of hardware 'B' to boards '3', '5', and '6'.)

Attach 2x hardware 'B' (Φ15*9.5) to boards '3', '5', and '6'.

Note the 'NARROW' orientation.

STEP 17

(Diagram showing the attachment of hardware 'B' to boards '5', '3', '6', and '2'.)

Attach 4x hardware 'B' (Φ15*9.5) to boards '5', '3', '6', and '2'.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 18

(Diagrams showing the attachment of hardware 'B' to boards '4' and the main assembly.)

Attach 2x hardware 'B' (Φ15*9.5) to boards '4' (x2).

STEP 19

(Diagrams showing the attachment of hardware 'A' and 'B' to board '1' and the main assembly.)

Attach 8x hardware 'A' (Φ6*35) and 8x hardware 'B' (Φ15*9.5) to board '1'.

Flip board '1' 180 degrees and attach it to the main assembly.

Insert the cam bolt into the hole first, then insert the cam lock and lock it.

STEP 20

(Diagrams showing the attachment of hardware 'G' and 'N' to board '8'.)

Attach 20x hardware 'G' (Φ3.5*12) and 10x hardware 'N' (33*8.4*18) to board '8' (x2).

STEP 21

(Diagram showing the attachment of hardware 'D' to boards '16' and '11'.)

Attach 6x hardware 'D' (Φ4*50) to boards '16' and '11'.

STEP 22

(Diagrams showing the insertion of boards '17' and '18'.)

Attach 12x hardware 'F' (Φ5*16) to boards '17' and '18'.

Step 1: Select the desired height and put it in.

Step 2: Aim the board gaps down.

STEP 23

(Diagrams showing the attachment of hardware 'G' and 'L' to board '20'.)

Attach 8x hardware 'G' (Φ3.5*12) and 4x hardware 'L' (Φ25) to board '20' (x2).

STEP 24

(Diagrams showing the attachment of hardware 'G', 'I', and 'J' to the doors '20'.)

Attach 16x hardware 'G' (Φ3.5*12), 2x hardware 'I' (65*12*30), and 2x hardware 'J' (M4*19) to the doors '20'.

Locked with panel pre-drilled. After adjusting the gap, you can lock the other three screws.

STEP 25

(Diagrams showing hinge adjustment.)

To adjust the vertical height: Loosen the four screws "A" on both hinges. Two of them are usually in slotted holes which allows you to adjust up or down by a few millimeters. Then tighten back up.

To adjust depth: Loosen screw "B" and adjust door. If the door cannot be adjusted, please loosen screw "C", then try again. Tighten screws "B" and "C".

To adjust side ways: Turning the screw "C" on BOTH hinges on each door.

STEP 26

(Diagram showing the final placement of a component.)

(This step appears to be a final placement or insertion, the diagram is a simple representation.)

Furniture Care and Maintenance

Particleboard

Thank you for your purchase. We want your item to last as long as possible. To ensure the product gives you years of service, please refer to this care and maintenance guide.

MAINTENANCE

• Tighten all bolts and screws again within the first 2 weeks of assembly.
• Check the tightness of all bolts every 2 months, tighten them if necessary.

CLEANING

• Clean the surface of the particleboard with a lightly dampened cloth.
• Small amount of mild soap can be used if necessary.
• Dry the surface immediately after cleaning.
• DO NOT use bleach or alcohol detergent to clean the surface.
• DO NOT apply wood treatment on parts made with particleboard.

Particleboard will swell and distort when suffer damage. Make sure to dry the furniture immediately after cleaning.