RÅDMANSÖ Cabinet Assembly Instructions

Safety Warnings

[Warning] Children have died from furniture tipover. To reduce this risk:

• Always install the provided anti-tip device.
• Never place a TV on this product.
• Never allow children to stand, climb, or hang on drawers, doors, or shelves.
• Never open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Read and follow all instructions carefully.

Key icons: [Warning], [locked door], [open door], [furniture tip-over warning], [no TV icon], [no climbing icon].

Tools and Hardware

Required tools: Phillips screwdriver, flathead screwdriver, pencil, hammer, drill.

Drill bits: 8 mm (5/16") and 3 mm (1/8").

The package includes various hardware: screws, dowels, cam locks, drawer slides, hinges, and wall mounting components.

Assembly Guide

1. Step 1-2: Identify Parts. Lay out and identify all hardware and components.
2. Step 3: Assemble Base. Connect side panels to the base panel using dowels and cam locks.
3. Step 4: Attach Back Support. Secure the back panel support.
4. Step 5: Attach Bottom Panel. Connect the bottom panel to the side panels.
5. Step 6: Attach Second Side. Connect the second side panel.
6. Step 7: Install Shelves. Insert and secure shelves.
7. Step 8: Install Dividers. Attach internal vertical dividers.
8. Step 9: Insert Back Panels. Slide back panels into grooves.
9. Step 10: Attach Top Panel. Secure the top panel.
10. Step 11: Assemble Drawer Boxes. Construct drawer boxes.
11. Step 12-14: Attach Drawer Slides (Cabinet). Mount cabinet-side drawer slides.
12. Step 15-16: Attach Drawer Slides (Drawer). Mount drawer-side slides to drawers.
13. Step 17-18: Attach Hinges. Mount door hinges to the cabinet.
14. Step 19: Insert Doors. Mount doors onto hinges.
15. Step 20: Position Cabinet. Place the cabinet in its final location.
16. Step 21: Wall Mounting. Secure the cabinet to the wall using provided hardware. Options for solid walls (A, B) and hollow walls (B) or solid wood (C) are shown. Use 8mm drill bits for A/B and 3mm for C. Wall screws are approximately 70mm.
17. Step 22-23: Install Anti-Tip Device. Attach anti-tip hardware to the cabinet and the wall.
18. Step 24: Attach Drawer Slides. Mount remaining drawer slides to the cabinet.
19. Step 25: Insert Drawers. Slide assembled drawers into runners.
20. Step 26-27: Attach Drawer Slides & Insert Drawers. Mount slides and insert drawers.
21. Step 28-29: Attach Door Handles. Secure door handles to the doors.
22. Step 30-33: Install Shelves. Insert adjustable shelves using shelf supports.
23. Step 34-35: Insert Sliding Doors. Slide the doors into their tracks.
24. Step 36: Attach Sliding Door Handle. Secure the handle to the sliding door.
25. Step 37-39: Assemble Drawer Box. Construct drawer boxes, including attaching the bottom panel.
26. Step 40: Attach Drawer Top. Secure the drawer top panel.
27. Step 41-42: Attach Drawer Slides. Mount drawer slides to the drawer boxes.
28. Step 43: Insert Drawers. Slide the completed drawers into the cabinet.

Final Checks

Adjust doors for proper alignment using hinge screws.

Ensure the cabinet is stable and securely attached to the wall with the anti-tip hardware.